Product Experts Available 1-800-359-7717

CAMARO LIGHTS FOR ALL YEARS AND MODELS

Rick's Camaros has a huge selection of lights, including Camaro headlights and rear lights. Rick's Camaros is your one-stop shop for an unbeatable selection of high-quality Camaro headlight parts. Rick's Camaros loves Camaros as much as you do, and our catalog of Camaro brake lights reflects that devotion. Get your Camaro headlight parts at Rick's Camaros today.

Items: 1 to 28 of 477 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Grid  |  List
Best Sellers
Camaro Headlight Retaining Ring, 1967-1975 Part # HH-15
Reproduction Of Original Round Inner Ring Which Holds The Headlight Bulb To The Headlight Bucket 1" Width 2 Required Per Car Comes With Screws With Oval Hole Replaces GM #5950248 Headlight bezels on your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, or 1975 Camaro take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro bezels start looking tired, and nothing looks worse on a fresh restoration than tired and worn headlight bezels. Rick's Camaros has the solution for you! Our Chevy Camaro headlight sealed beam retaining ring is an accurate reproduction, has correct ring width, and is in original high polished stainless material. The round inner ring holds the headlight bulb to the headlight bucket. From race, restoration or daily drivers, Rick's Camaros is always sourcing from the world’s top manufacturers to bring you the very best 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 Camaro headlight bezels possible. Learn More
$12.99 ea.
Camaro Side Marker Light Bezel, Chrome, 1968 Part # MB-25
Show Quality Reproduction Bright Chrome Over Die-Cast As Original Exact Fit Fits Front Or Rear Fender Four Required Per Car Dull chrome accents on new paint is definitely the way to have people be less than impressed with your 1968 Camaro. The bezels on your F-Body can become rusted and scratched up, ruining the look of your sider marker lights. This superior repoduction of the original side light marker bezel is definitely the way to go to make a new paint job pop! Rick's Camaros is proud to offer this side marker light bezel to make your restoration stand out in the crowd. This show quality reproduction is heavy chrome and promises an exact fit for your F-Body's front or rear. These chrome bezels are sold individually, and four are required per vehicle. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 1st gen Camaro! Learn More
$6.99 ea.
Camaro Headlight Adjusting Screw & Nut, 1967-1968 Part # HH-14
Reproduction Of Original Correct Screw and Nut Set Set Covers One Headlamp 4 Required Per Car Fits 1967 Or 1968 1st Gen Camaros The headlights are vital on your 1967 or 1968 first generation Camaro, especially when driving at night or in harsh weather conditions. It is possible over time that your head light assembly can become loose, and you may have misplaced your adjusting screw. Each headlamp required an adjusting screw and nut to keep it secure and ready to use while driving. Rick's Camaros offers this new headlight adjusting screw and nut for your F-Body, ready to install in your headlight. This set covers one of your Camaro's head lamps, however four are required to complete your car. Go ahead and get enough for each of your headlights so you can rest assured while on the road. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More
$1.50 Set
Camaro, License Lamp Assembly, Reproduction, 1967-1969 Part # LP-38
Best Quality Reproduction License Lamp Assembly 12" Brown Lead Wire With Grommet Black Connector & White Lens Gasket Gold Cad Plated Housing Crystal Clear Lens With Correct Lettering Script Includes Plated Screws For 1st Gen Models Camaro clear plastic parts do one of two things over time, they can turn milky and hazy or completely fall apart. Camaro gold cad plating will turn chalky over time. Both of these are main components of your Camaro license lamp assembly. Rick's Camaros offers this superior reproduction 1967, 1968 or  1969 first generation Camaro license lamp assembly to replace that ugly, rusted one on your Camaro. This reproduction assembly includes cad plated housing, socket with bulb, brown color lead wire with grommet and correct black terminal end, crystal clear lens with script, white colored lens gasket, and plated screws. This license lamp assembly is just another one of the best quality parts Rick's Camaros brings you to keep your Camaro Super Sport (SS), Rally Sport (RS), Z28 or Standard correct and looking great always at the best possible price. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$22.99 ea.
Camaro Headlight Door Limit Switch, Rally Sport (RS), 1967 Part # RS-23
Technically Correct Limit Switch Assembly Correct Lettering & Weatherproofing Attached Ground Wire With Shrink Tubing As Original Made & Assembled In USA 4 Required Per Car For Rally Sport (RS) Models The 1967 Camaro Rally Sport hide-away headlight system can be one of the toughest to work on because of its intricate nature and high failure rate. The headlight doors are controlled with two of these limit switches on each headlight door. If they are malfunctioning or adjusted improperly, the door may not stop in the right location or run the headlight door motor until the circuit breaker pops. Replace yours today with the best part from Rick's Camaros. This technically correct headlight door limit switch comes with the attached ground wire with correct serrated eyelet, and is connection shrink tubed as the original. Two are required per headlight, so be sure to get two if you need to! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro RS!   NOTE: Limit switches must be installed with the ground wire down or the switch will ground the wrong side of the circuit and send the wrong signal to the relays causing system malfunction. Learn More

Was: $15.99 ea.

Now: $14.99 ea.
Camaro Side Marker Light Lens Assembly, Fender, Clear, 1968 Part # MB-3
Superior Reproduction of Original Officially Licensed GM Restoration Part Clear Lens Correct "Guide" Lettering and Script On Clear Lens Sold Individually Two Required Per Car Complete Set Available Separately as Part # MB-27 1968 Camaro fender side marker lenses serve a critical purpose. Not only do new Camaro front fender side maker lenses look great against a freshly painted body or fresh restoration, but are a must for visibility on low light or foggy days. Typically faded cracked or simply missing over the years, these Chevrolet lenses are a must have in most states just to pass inspection. Rick's Camaros is proud to offer these high quality reproduction 1968 fender side marker lens, painstakingly reproduced to original factory specification using on the most modern techniques, and finest quality materials. This accurate reproduction clear side marker light lens has the correct text and script and promises to be an easy installation. Simply unscrew your original front side markers, unplug the harness and pop these new ones in. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 1st gen Camaro!    NOTE: 1968 Camaro front side marker bulbs (Our Part # LT-8) are amber in color. Learn More
$13.99 ea.
Camaro Headlight Sealed Beam, 1967-1981 Part # HH-18
High Quality Original Style Replacement 50 Watts Low Beam, 60 Watts High Beam Sealed Beam Dual Filament Sold Each Two Required per Car Correct T3 Headlights Available as our Part # LT-30 Is it time to refurbish the headlights on your beautiful 1967-1981 Chevrolet Camaro? Rick's Camaro's offers this replacement sealed beam headlight with the budget-minded Camaro restorer in mind. Not everyone needs technically correct T-3 headlights in their Chevy Camaro so Rick's found this bulb from a major replacement headlight manufacturer with that in mind. Don't drive down that long, dark road coming home from your local cruise in without the proper lighting in the front of your Camaro. Replace your old headlights on your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camero today with quality parts from Rick's Camaro. Learn More

Was: $11.99 ea.

Now: $9.99 ea.
Camaro Headlight Retaining Ring Mounting Screw Set, 1967-1973 Part # HH-17
Correct Reproduction Retains Headlamp Retaining Ring HH-15 1 Kit Required Per Car   Headlight bezels on your 1967, 1968, 1969, 1970, 1971, 1972, or 1973 Camaro take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro bezels start looking tired, and your headlight retaining ring has trouble holding the headlight bulb to the headlight bucket. Whether the screws have gotten lost are broken, the retaining ring will no longer be able to retain your Camaro's headlight. Rick's Camaros has the solution for you! Our Chevy Camaro headlight retaining ring mounting screw set is a kit made up of six mounting screws. This set is all you need to keep your headlight bulbs secure.. From race, restoration or daily drivers, Rick's Camaros is always sourcing from the world’s top manufacturers to bring you the very best 1967, 1968, 1969, 1970, 1971, 1972, or 1973 Camaro headlight bezels possible. Learn More
$2.99 Set
Camaro Side Marker Light Lens Assembly, Quarter Panel, Red,1968 Part # MB-4
Superior Reproduction of Original Officially Licensed GM Restoration Part Red Lens Correct "Guide" Lettering and Script On Clear Lens Sold Individually Two Required Per Car Complete Set Available Separately as Part # MB-27 1968 Camaro fender side marker lenses serve a critical purpose. Not only do new Camaro front fender side maker lenses look great against a freshly painted body or fresh restoration, but are a must for visibility on low light or foggy days. Typically faded cracked or simply missing over the years, these Chevrolet lenses are a must have in most states just to pass inspection. Rick's Camaros is proud to offer these high quality reproduction 1968 fender side marker lens, painstakingly reproduced to original factory specification using on the most modern techniques, and finest quality materials. This accurate reproduction red side marker light lens has the correct text and script and promises to be an easy installation. Simply unscrew your original front side markers, unplug the harness and pop these new ones in. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 1st gen Camaro! NOTE: 1968 Camaro front side marker bulbs (Our Part # LT-8) are amber in color. Learn More
$12.99 ea.
Camaro Headlight Adjusting Screw & Nut, 1969 Part # HH-19
Correct screw and nut set for 69. Four sets required per car. Learn More
$1.99 ea.
$4.99 ea.
Camaro Back-Up Light Lens, Rally Sport (RS), 1967-1968 Part # PL-9
Best Quality Reproduction RS Backup Light Lens Officially Licensed GM Restoration Part Crystal Clear Lens  Correct Lettering and Script Unlike Others Fits Rally Sport Cars Only Sold Indidivually 1967-1968 Camaro Rally Sport back up lenses take a beating over time. Camaro back up lens often turn hazy, crack or simply crumble leaving that freshly painted or daily driven Camaro not looking so sharp. Also, broken, missing or faded Camaro back up lenses post a critical safety hazard and may be required in most states to pass inspection. Rick's Camaros is proud to offer the highest quality accurate reproduction back up lens on the market. Injected molded using only the most modern material ensures that your Camaro will sparkle for years to come. This back-up light lens also includes the correct lettering and script like your original. Replace your 1967-1968 RS Camaro lenses today with this reproduction back up lens from Rick's Camaros. Learn More
$8.99 ea.
Camaro Parking Light Lens, For Cars With Standard Trim (Non-Rally Sport) Or Rally Sport (RS), 1969 Part # PL-3
Officially Licensed GM Restoration Part Reproduction of Original Crystal Clear Lens With Chrome Nose Correct "Guide" Lettering and Script For Rally Sport Or Non-Rally Sport Models Sold Individually Made In USA Stainless Trim Rings For RS Cars Available Separately As Part # PL-5 Rick's Camaros is proud to bring you superior quality reproduction park light lens for your 1969 Camaro you can buy. Over time, your Camaro park lenses can turn a gold-brown color that really affects the brightness of your lighting. Sometimes your original F-Body park lenses simply crumble leaving you with an unsightly exposed bulb and leaving your housing open to rust or electrical issues. Rick's Camaros offers this officially GM licensed superior reproduction parking light lens for your Rally Sport or non-Rally Sport F-Body. This crystal clear faceted round lens has the correct guide lettering and script, and is sold individually. From daily driver, show to hot rod, buy the best for your 1969 Camaro with park lamp lenses from Rick's Camaros. Rest assured your restoration will be done right! Learn More

Was: $12.99 ea.

Now: $11.99 ea.
Camaro Taillight Lens Gaskets, 1967-1968 Part # WS-51
Dense foam correct color lens to housing seals. RH and LH pair. Learn More
$6.99 pr.
Camaro Taillight Housing To Body Gaskets, Molded, 1967-1968 Part # WS-98
Best Quality Reproduction Tail Light Housing Gaskets Heavy Density Injection Molded Thick Rubber Seal As Original Seals Are Molded To Fit The Bezel Just Like The Originals Seals Much Better Than Generic Foam Gaskets Sold As A Pair The old cheap foam taillight housing gaskets on your 1967 or 1968 Camaro have most likely won't protect the space between your taillight and body for a long time. They can become worn down from the weather, deteriorating and leaving your trunk and spatter paint exposed to rainwater. Rick's Camaros wants to ensure your F-Body's rear section is protected, by offering these accurate reproduction taillight housing to body gaskets. These gaskets are the best defense against the elements because they were actually designed to fit the bezel and tail pan to seal like the originals. These are made from heavy density molded rubber, with a far superior sealing and appearance to the cheap foam gaskets. Don't wait to replace your tail light housing gaskets, and feel confident while on the road. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More

Was: $23.99 pr.

Now: $21.99 pr.
Camaro Taillight Housing Mounting Stud & Nut Set, Threaded,1969 Part # RC-530
Best Quality Reproduction Tailight Housing Mount Stud Set 10 Piece Stud & Nut Set 5 Pre-Grooved Studs For Easy Installation 5 Self-Threading Nuts With Captured Washer Two Sets Needed Per Car The mounting studs and nuts in your 1969 Camaro's light housings can degrade over time, break, or possibly go missing, leaving your lamp housing assemblies to suffer. Unlike other reproduction Camaro tailight stud sets, this set from Rick's Camaros does the job the best. This set of ten mounting pieces includes five original stud type fasteners with five self threading washer nuts. Pre-grooved studs allow for the nut to go on much easier. You will find that other market options are very easy to break because they lack this feature. This set will complete one tail light housing on your F-Body. Rick's offers only the best parts like this tail light housing mount stud set to make your 1969 1st gen Camaro restoration much easier. Learn More

Was: $15.99 Set

Now: $12.99 Set
Camaro Side Marker Light Lens Gasket Set, 1968 Part # MB-23
Seals lens assembly to body, prevents water leakage, especially into the trunk area. Foam sponge internal seals as original. New reproductions with correct shape and material. Set of four. Learn More
$5.99 Set
Camaro Headlight Bucket Hardware Set, 1970-1981 Part # 734009
Restoration Correct Replacement Set For Installation Of Two Headlights This 1970-1981 Camaro replacement headlight bucket hardware set has been manufactured to meet or exceed factory specifications and performance. Ricks Camaros offers this quality replacement set for your restoration project. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Ricks Camaros has sourced this headlight bucket hardware set among other possible parts as the best choice for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro repair or restoration project. Trust Ricks Camaros for all your parts needs. Learn More
$16.99 Set
Camaro Parking Light Lens To Housing Gaskets, Rally Sport (RS), 1967-1968 Part # WS-30
Best Quality Reproduction Parking Lens Gasket Officially Licensed GM Restoration Part Correct Thick Die-Cut Gray Rubber Gray Rubber Keeps The Reflector From Appearing Dark Sold As A Pair For Rally Sport Models Some of the reproduction Camaro park light housing assemblies come with a black gasket between the housing and the lens. This causes the reflector to reflect black, making the lens appear very dark. Rick's Camaros now has the correct gray parking light lens to housing gaskets for your RS park light housings. These gaskets will keep your lenses bright just like they were when your Camaro rolled off of the assembly line. With correct thick die cut gray rubber, this pair of parking light to housing gaskets will keep the reflector from appearing dark on your Rally Sport F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro RS! Learn More

Was: $7.99 pr.

Now: $4.99 pr.
Camaro Parking Light Assembly, For Cars With Standard Trim (Non-Rally Sport) Or Rally Sport (RS), 1969 Part # PK-8
Show Quality Reproduction Park Light Assembly Officially Licensed GM Restoration Part Fully Assembled Includes Housing, Lens With Correct Scripts, Stainless Screws, Correct Gasket, Amber Bulb, Socket With Crimped & Sleeved Harness, & Correct Color Wiring Fits Rally Sport Or Standard Cars Fits Driver's (Left) Or Passenger's (Right) Side 2 Required Per Car Add PL-5 For Rally Sport Trim Option   Ricks Camaros is proud to bring you the best, high quality reproduction park light lens assembly for your 1969 Camaro you can buy. Over time, your Camaro park lenses can turn a gold-brown color that really affects the brightness of your lighting. Sometimes your original F-Body Camaro front park lamps simply crumble leaving you with an unsightly exposed bulb and leaving your housing open to rust or electrical issues. Rick's Camaros offers this officially GM licensed park light assembly for your F-Body with standard trim. Each 1969 Camaro park light assembly is fully assembled and includes the housing, lens with correct scripts, stainless screws, correct gasket, amber bulb, socket with crimped and sleeved harness, and correct color wiring. This assembly will fit either the driver's or passenger's side of your non-Rally Sport Camaro, and two are required per car. From daily driver, show to hot rod, buy the best for your 1968 Camaro with park lamp assembly from Rick's Camaros. Rest assured your restoration will be done right! Learn More
$66.99 ea.
Camaro Parking Light Lens, Rally Sport (RS), 1967-1968 Part # PL-4
Officially Licensed GM Restoration Part Reproduction of Original Sharp & Crystal Clear Acrylic Lens Correct "Guide" Lettering and Script For Rally Sport Models Sold Individually Made In USA Rick's Camaros is proud to bring you superior quality reproduction park light lens for your 1967 or 1968 Camaro you can buy. Over time, your Camaro park lenses can turn a gold-brown color that really affects the brightness of your lighting. Sometimes your original F-Body park lenses simply crumble leaving you with an unsightly exposed bulb and leaving your housing open to rust or electrical issues. Rick's Camaros offers this officially GM licensed superior reproduction parking light lens for your Rally Sport F-Body. This crystal clear faceted acrylic lens has the correct guide lettering and script, and is sold as a pair to complete your driver's and passenger's side park lights. From daily driver, show to hot rod, buy the best for your 1969 Camaro with park lamp lenses from Rick's Camaros. Rest assured your restoration will be done right! Learn More

Was: $16.99 pr.

Now: $15.99 pr.
Camaro Taillight Lens, Rally Sport (RS), 1967 Part # PL-12
Accurate Reproduction Officially Licensed GM Restoration Part High Quality Red Lens Sold Individually Correct Scripts & Text A Must Have For Any 1967 RS Camaro These quality reproduction 1967 Camaro taillight lenses are a must for any F-Body non Rally Sport Camaro. Over time, your old lenses will become washed out and make your Chevy Camaro an easy target for a rear end collision (the tail lights are already mounted low enough as it is!). The rear bulb housings are made of plastic and become extremely prone to cracking and flaking as they get more worn down. Rick's Camaros offers these accurate reproduction red taillight lenses, made of high quality materials with correct scripts and text, and in correct colors. Replace your old 1967 1st gen Chevrolet Camaro tail lights today with this quality reproduction from Rick's Camaros and make your Camaro stand out at night. Learn More
$16.99 ea.
Camaro Headlight Bucket, Left, 1967-1969 Part # HH-7
Best Quality Reproduction Camaro Headlight Bucket Stamped Steel Construction Black EDP Coated To Ensure Rust Prevention Fits Driver's (Left) Side Replaces GM #5957684 Camaro headlight buckets are right out front and prone to rust from weather conditions, and crash collision damage. Rick's Camaros offers only the best parts at the best possible price. If you need a head light bucket for the sealed beam on your 1967, 1968 or 1969 standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 coupe or convertible, we have it in stock and ready to ship. This headlamp capsule bucket is made from stamped steel and is EDP coated to ensure that you will not have to worry about future rust problems. This bucket will fit the driver's side of your F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! NOTE: The 69 RS Camaro only uses a RH bucket on the left (driver's) side, and a LH bucket on the right (passenger's) side! Learn More
$28.99 ea.
Camaro Headlight Door Vacuum Actuator, Rally Sport (RS), 1968-1969 Part # RS-39
Best Quality Camaro RS Vacuum Actuator Officially Licensed GM Restoration Part New Tooling Gold Cad Plated Black Rubber Dust Boot Each Actuator Tested For Operation At Manufacturer & Before Packaging 1 Year Manufacturer's Warranty Against Leakdown Or Failure 1968 and 1969 Rally Sport (RS) Camaros are notorious for actuator failures. Original GM Camaro vacuum actuators lasted for years. The first available reproductions usually didn't work out of the box and if they did, they would fail shortly thereafter. Rick's Camaros brings you this superior reproduction headlight vacuum actuator made on completely new tooling, gold cad plated, and including a black rubber dust boot. Replace your non-working RS vacuum actuators and stop opening and closing those doors by hand! These actuators were tested for proper operation at manufacture and again before packaging. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 RS Camaro!  WARNING: Vacuum actuators obviously operate with vacuum pressure. DO NOT attempt to operate the vacuum actuator with compressed air as this will destroy the internal seal and void the manufacturer's warranty. NOTE: If an actuator appears to "stick" or operate slowly, a small amount of silicone based lubricant can be sprayed into each vacuum port. DO NOT spray petroleum based (i.e. WD-40®) into the actuator as these products will cause the internal seal to swell and void the manufacturer's warranty. Learn More
$79.99 ea.
Camaro Back-Up Light Lens Mounting Screw Set, Rally Sport (RS), 1969 Part # HW-15
Accurate Reproduction High Quality Heavy Chrome Plating Shouldered Lens Screws With Correct Dimensions .675" Screw Length For Back-Up Lights For Rally Sport Models 1969 Camaro back up light screws are a must for any restoration, race car or daily driver. Don’t settle for a generic Philips head screws on your Camaro back-up lights, these correct F-Body Camaro backup light screws feature the proper non threaded shoulder to apply proper torque without crushing or cracking the light lens. This accurate reproduction set of backup light lens mounting screws has heavy chrome plating, has the correct shoulder length to keep the backup light lens from cracking, and is correct with proper fine thread to ensure that they will not cross thread and strip your Camaro's back-up light housing. Don’t settle for cheap hardware store screws when it comes to your expensive reproduction or original backup light lenses and backup light bezels. Trust Ricks Camaros for all of your restoration and replacement needs for your 1969 Camaro RS!  Learn More
$6.99 Set
Camaro Taillight Housing & Lens Seal Gaskets, Show Correct, 1969 Part # WS-29
Show Correct Reproduction Tail Light Housing Gaskets Injection Molded Thick Rubber Seal As Original Heavy Density Material Seals Are Molded To Fit The Housing Just Like The Originals Seals Much Better Than Generic Foam Gaskets You are returning home from a cruise-in in your 1969 Camaro and get caught in one of those sudden rain showers in the Summer only to find those cheap foam gaskets you bought to seal your tailight housings weren't such a good deal in the long run. Now, the trunk of your 1969 Camaro is full of water and the trunk spatter paint is washing away! Rick's Camaros is happy to offer these tailight housing gaskets as the best defense against the elements because these were actually designed to fit the bezel and the tail pan to seal like the originals. This pair of driver and passenger side tail light lens seals are molded and made of heavy density material, and have an excellent sealing and facotry appearance just like the originals. Trust Rick's Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro! Learn More
$22.99 pr.
Camaro Headlight Bucket, Right, 1967-1969 Part # HH-8
Best Quality Reproduction Camaro Headlight Bucket Stamped Steel Black EDP Coated To Ensure Rust Free Delivery Fits Passenger's Side Replaces GM #924535 Being placed right on the front of the car, your headlight buckets on your 1967, 1968, or 1969 Camaro are heavily prone to rust and collision damage. Being so susceptible to damage and being one of the first things that people see on your car, damaged headlight buckets can really take away from the overall great look of your Camaro. Rick's Camaros offers only the best parts at the best possible price, and this headlight bucket, for the passenger's side is a high quality reproduction of your original headlight part, in stamped steel and EDP (Electro Deposit Primer) coated to ensure a rust resistant finish. If you need a head light bucket for the sealed beam on your 1967, 1968 or 1969 1st gen standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 coupe or convertible, Rick's Camaros is here to give you what you need. Trust Rick's Camaros for all of your restoration and replacement needs! NOTE: The 69 RS Camaro only uses a RH bucket on the left (driver's) side, and a LH bucket on the right (passenger's) side! Learn More
$28.99 ea.
Items: 1 to 28 of 477 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Grid  |  List
3