Product Experts Available 1-800-359-7717

CAMARO FRONT LIGHT COMPONENTS AND HARDWARE FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (1)
  2. (33)
  3. (2)
  4. (2)
  5. (3)
  6. (3)
  7. (1)
  8. (1)
  9. (1)
PRICE RANGE
  1. (19)
  2. (12)
  3. (21)
  4. (3)
  5. (14)
 
Items 1 to 24 of 69 total Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Grid  List 
Camaro Headlight Door Limit Switch, Rally Sport (RS), 1967 Part # RS-23
Technically Correct Limit Switch Assembly Correct Lettering & Weatherproofing Attached Ground Wire With Shrink Tubing As Original Made & Assembled In USA 4 Required Per Car For Rally Sport (RS) Models The 1967 Camaro Rally Sport hide-away headlight system can be one of the toughest to work on because of its intricate nature and high failure rate. The headlight doors are controlled with two of these limit switches on each headlight door. If they are malfunctioning or adjusted improperly, the door may not stop in the right location or run the headlight door motor until the circuit breaker pops. Replace yours today with the best part from Rick's Camaros. This technically correct headlight door limit switch comes with the attached ground wire with correct serrated eyelet, and is connection shrink tubed as the original. Two are required per headlight, so be sure to get two if you need to! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro RS!   NOTE: Limit switches must be installed with the ground wire down or the switch will ground the wrong side of the circuit and send the wrong signal to the relays causing system malfunction. Learn More

Was: $15.99 ea.

Now: $14.99 ea.

Camaro Headlight Door Vacuum Actuator, Rally Sport (RS), 1968-1969 Part # RS-39
Best Quality Camaro RS Vacuum Actuator Officially Licensed GM Restoration Part New Tooling Gold Cad Plated Black Rubber Dust Boot Each Actuator Tested For Operation At Manufacturer & Before Packaging 1 Year Manufacturer's Warranty Against Leakdown Or Failure 1968 and 1969 Rally Sport (RS) Camaros are notorious for actuator failures. Original GM Camaro vacuum actuators lasted for years. The first available reproductions usually didn't work out of the box and if they did, they would fail shortly thereafter. Rick's Camaros brings you this superior reproduction headlight vacuum actuator made on completely new tooling, gold cad plated, and including a black rubber dust boot. Replace your non-working RS vacuum actuators and stop opening and closing those doors by hand! These actuators were tested for proper operation at manufacture and again before packaging. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 RS Camaro!  WARNING: Vacuum actuators obviously operate with vacuum pressure. DO NOT attempt to operate the vacuum actuator with compressed air as this will destroy the internal seal and void the manufacturer's warranty. NOTE: If an actuator appears to "stick" or operate slowly, a small amount of silicone based lubricant can be sprayed into each vacuum port. DO NOT spray petroleum based (i.e. WD-40®) into the actuator as these products will cause the internal seal to swell and void the manufacturer's warranty. Learn More
$79.99 ea.
Camaro Side Marker Light Backing Plate, Front or Rear, 1970-1977 Part # 704138
Reproduction Of Original Stamped Steel EDP Coated Fits 1970-73 Front Or Rear Fits 1974-77 Front Only Nice reproduction of the correct retainer to hold the side marker lens assemblies to the front fender or quarter panel of your Camaro. The side marker backing plate attaches to the studs of the lens assembly before the retaining nuts are screwed into place. Replace your rusty or missing side marker backing plates today with this quality part from Rick's All Generations. NOTE: 1970-73 Camaros use a total of 4 side marker backing plates and 1974-77 Camaros use 2 for the front only. Why? In 1974, the Camaro went to the wrap around rear taillight design which eliminated the rear side marker light. Learn More
$5.99 ea.
Camaro Headlight Door Cover Screw Set, Rally Sport (RS), 1967-1968 Part # HW-130
Reproduction Of Original Correct Black Phillips Head Machine Screws 2 Required Per Car Set Of 4 This Camaro reproduction rally sport headlight door screw set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit; finish and function will work superbly for your restoration. In addition, using a rally sport headlight door screw set from Rick’s will add authenticity and value to your Camaro. Learn More
$2.99 Set
Camaro Headlight Door Cover Hardware Set, Rally Sport (RS),1969 Part # HW-62
Pal nuts and black paintable screw set for attaching 69 outer headlamp door cover to RS assembly. Set does both doors. Learn More
$2.99 Set
Camaro Headlight Door Vacuum Actuator Clevis Pin Set, Rally Sport (RS), 1968-1969 Part # RS-36
Technically Correct Reproduction Clevis Pin Set Clevis Bushings & Clips With Correct Component Finishes Set Of 6 Mounts One Actuator Not Generic Parts As Others On The Market For Rally Sport (RS) Models The headlight door assembly in your 1968 or 1969 Rally Sport Camaro has several components to keep it together, including the vacuum actuator clevis pins. These pins and bushings are responsible for mounting your actual actuator, but over time can become worn and possibly go missing, putting your vacuum actuator assembly in danger. Replace your actuator clevis pins today. Rick's Camaros offers this set of actuator clevis pins, used to connect the end of the vacuum actuator to the actuator arm on the headlight capsule in your F-Body. Others offered elsewhere are smaller than the original and cause door alignment problems and opening/closing issues. This technically correct reproduction set includes six correct clevis pins and bushings, all with correct component finishes. This set will mount one actuator. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro RS! Learn More

Was: $11.99 Set

Now: $4.99 Set

Camaro Side Marker Light Housing To Body Mounting Nuts, 1970-1980 Part # 704137
Reproduction Of Original (8) Stamped Steel Nuts Secures Side Marker Light Housings To Fender and Quarter Panel Helps Keep Water Out Of The Trunk Hardware is one of the best investments you can make for your show Camaro or your daily driver. When you put dirty or repainted fasteners on new side marker light housings...the new parts seem to look a little dingy. Or, you use the old fasteners and the side marker lights will not get tight enough to seal the trunk from water and dirt. Replace your side marker light mounting nuts with this quality reproduction while you are replacing your side marker light housings from Rick's All Generations today and insure you get the best parts for your restoration. Learn More
$5.99 Set
Camaro Headlight Door Limit Switch Brackets Mounting Screw Set, Rally Sport (RS), 1967-1969 Part # HW-63
67 RS limit switch bracket mounting screw set. Mounts all 4 brackets. Correct machine thread round Phillips head. Learn More
$2.99 Set
Camaro Headlight Door Relay Board Assembly, Rally Sport (RS), 1967 Part # RS-86
Complete Reproduction Relay Board Assembly Officially Licensed GM Restoration Part Contains Correct Relays & Circuit Breaker Unlike Others Fully Assembled Die Stamped Steel Correct 10 Amp Circuit Breaker With Nuts All Mounted With Correct Plated Hardware For Rally Sport (RS) Models Rick’s Camaros offers this 1967 Camaro RS Relay board which comes with a correct die stamped relay plate, Three correctly stamped relays with “Delco Remy” on the case and “858” on mounting bracket, and correct 10 amp circuit breaker with “”10A” ink stamp. All pieces on Rick’s 1967 Camaro RS relay board are mounted with technically correct hardware for the demanding restorer. This relay board assembly is ready to mount on your RS fender and hook to your wiring harness straight out of the box. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro RS!  Learn More
$89.99 ea.
Camaro Headlight Door Covers, Inner, Chrome, Rally Sport (RS), 1969 Part # RS-54P
Licensed Reproduction of Original Officially Licensed GM Restoration Part Heavy, Bright Chrome Plating Accurate Fit Unlike Others Sold As Pair For Driver's & Passenger's Side One Required Per Car Replaces GM #3958006 (Right) & 3958005 (Left) 1969 Rally Sport Camaros have this inner door chrome piece behind the body colored headlamp door. Other reproductions available do not fit through the RS headlamp door properly requiring you to shave off a bit of the die cast to make it fit. Rick's Camaros is happy to offer these high quality accurate reproduction inner head light door covers, with accurate castings. This comes as a pair for both the driver's and passenger's side inner headlight doors. These bright chrome headlamp covers will look perfect and exceptionally clean on your Rally Sport F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro RS! Learn More
$91.99 pr.
Camaro Headlight Door Conversion Kit, Vacuum To Electric, Rally Sport (RS), 1969 Part # DS-58
Great Upgrade From Vacuum Easy Installation Direct Bolt-In   DSE's RS Headlight Door Kit replaces the stock vacuum actuated system on an RS headlamp equipped 1969 Camaro. It also makes converting your non-RS Camaro to hide-away headlights much easier. When installed, this kit will operate the headlight doors more reliably, smoother, and without the complicated and bulky vacuum accessories. Vehicles with large cams and low vacuum signals will also benefit from this system. The RS Headlight kit uses current sensing technology to provide a system that needs no adjustment and is extremely safe. DSE has gone to great lengths to provide you with the highest quality, best engineered product available with the easiest installation and minimal modification to your vehicle. The kit comes complete with everything needed for installation including two electric actuators, a control module, harness, mounting brackets, and hardware. Learn More
$444.99 Kit
Camaro Headlight Door Stop Bumper Set, Rally Sport (RS), 1968-1969 Part # RS-60
Reproduction Door Stop Bumper Set For Radiator Support Made With Correct Size, Shape, & Thickness Set Of 4 For Rally Sport (RS) Models The door stop bumpers in your radiator support are prone to wear tear over time because of age and the effects of the weather. Deteriorating bumpers will ruin the look and operation of your headlight and radiator assemblies. Rick's Camaros offers these exact reproduction headlight door stop bumpers for your 1968 or 1969 Rally Sport Camaro. These bumpers promise to help make already difficult door and grille alignment a much easier task. This set of four bumpers will exactly replace your original thin door bumpers, and are made with correct size, shape, and thickness. Sometimes, it is the small things that make all the difference. New stop bumpers are the perfect replacements for your Rally Sport F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 Camaro RS! Learn More

Was: $6.99 Set

Now: $4.99 Set

$6.99 ea.
Camaro Headlight Door Relay Vacuum Switch, Rally Sport (RS), 1968-1969 Part # RS-47
Technically Correct Reproduction Relay Switch Valve Officially Licensed GM Restoration Part  Correct "AC Spark Plug Div" Text New Proprietary Tooling Correct Bracket & Plating Full 1 Year Warranty Against Leak Down Or Failure For Rally Sport (RS) Models The headlight door assembly in your 1968 or 1969 Rally Sport Camaro has several components to keep it together, including the vacuum relay valve for your vacuum assembly. Over time, this relay valve switch can rust and become worn down, and will need to be replaced to keep your headlight vacuum assembly working properly. Replace your headlamp vacuum relay valve today. Rick's Camaros offers this technically correct, high quality reproduction relay vacuum switch for your RS F-Body. This relay valave is made from new proprietary tooling, and includes all raised text, including Delco. This officially GM licensed valve is just what your Camaro needs to renew its full headlamp assembly. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro RS! Learn More
$85.99 ea.
Camaro Headlight Door Limit Switch Bracket Set, Rally Sport(RS), 1967 Part # RS-63
Technically Correct Limit Switch Bracket Set Mounts To Headlamp Assembly & Radiator Core Support Includes Small Rubber Molded Bumpers Four Bracket Set For Rally Sport (RS) Models The 1967 Camaro Rally Sport hide-away headlight system can be one of the toughest to work on because of its intricate nature and high failure rate. The headlight doors are controlled with two of these limit switches on each headlight door. If they are malfunctioning or adjusted improperly, it is possible that the limit switch brackets have rusted or worn down. Replace your headlight door limit switch brackets today with the best set from Rick's Camaros. This technically correct headlight door limit switch bracket set comes with the included small rubber molded bumpers, and mounts to your head light assemblies and radiator core support. This set includes four brackets for your limit switches! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro RS! Learn More
$38.99 Set
Camaro Headlight Door Stop Brackets, Radiator Support, Rally Sport (RS), 1969 Part # RS-62
Reproduction Door Stop Bracket For Radiator Support Accurate Die Stamped Steel Correct Size & Thickness Rubber Bumpers Installed For Rally Sport (RS) Models The door stop brackets in your radiator support are prone to rust and wear over time because of age and the effects of the weather. Rusty brackets will ruin the look and operation of your headlight and radiator assemblies. Rick's Camaros offers these technically correct headlight door stop brackets for your 1969 Rally Sport Camaro. These brackets correctly mount to the radiator core support. This pair of accurate die stamped steel reproduction brackets also include a reproduction rubber bumper, with correct size and thickness. This pair of core support brackets will fit both the driver's side and passenger's side of your F-Body. New stop brackets are the perfect replacements for your 1969 Camaro Rally Sport. Trust Rick's Camaros for all of your restoration and replacement needs for your 1969 Camaro RS! Learn More
$26.99 pr.
Camaro Headlight Door Vacuum Actuator Support Clamp Bracket, Left Or Right, Rear, Rally Sport (RS), 1968-1969 Part # RS-35
Reproduction Vacuum Actuator Support Clamp Bracket Die Stamped Sold Individually Two Required Per Headlamp Assembly For Rally Sport (RS) Models The headlight door assembly in your 1968 or 1969 Rally Sport Camaro has several components to keep it together, one of which is the vacuum actuator support clamp bracket. Over time, this steel bracket can rust and wear down, growing weak and not maintaining the hold in your actuator assembly. Replace your actuator support bracket today. Rick's Camaros offers this accurate reproduction vacuum actuator support bracket for your headlamp assembly. This bracket is die stamped and is sold individually, with two being required per assembly in your F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro RS! Learn More

Was: $8.99 ea.

Now: $7.99 ea.

Camaro Headlight Door Limit Switch Hardware Set, Rally Sport (RS), 1967 Part # RS-64
Technically Correct Limit Switch Hardware Set Includes Plated Bolts, Nuts, Flat & Star Washers Set Mounts All 4 Limit Switches To Brackets 32 Piece Set For Rally Sport (RS) Models The 1967 Camaro Rally Sport hide-away headlight system can be one of the toughest to work on because of its intricate nature and high failure rate. The headlight doors are controlled with two of these limit switches on each headlight door. If they are malfunctioning or adjusted improperly, the door may not stop in the right location or run the headlight door motor until the circuit breaker pops. When replacing your limit switch, it may be time to replace the mounting hardware as well. Rick's Camaros offers this technically correct set of plated bolts, nuts, flat and star washers for all four of your headlight limit switches. This 32 piece set will set mounts for all four limite switches to the brackets. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro RS! Learn More

Was: $10.99 ea.

Now: $9.99 ea.

Camaro Headlight Door Actuator Shields, Rally Sport (RS), 1969 Part # RS-434
Technically Correct Reproduction Actuator Shields Officially Licensed GM Restoration Part Injection Molded Correct Black ABS Plastic Without Numerals As Original Sold As A Pair For Both Driver's & Passenger's Side Headlights For Rally Sport (RS) Models The headlight door actuator shields are located behind your 1969 Camaro's fenders near the front end headlights. It is possible that these shields can rust and become worn down due to the constant dirt and water that gets kicked up by your F-Body's wheels. Rick's Camaros offers this technically correct pair of headlight door actuator shields for your Rally Sport. These officially GM licensed shields are injection molded, without numerals like the original, and with correct black ABS plastic like the originals.This pair will fit both the driver's and passenger's side headlights. Don't wait to replace your actuator shields and keep your headlight door assembly clean! Trust Rick's Camaros for all of your restoration and replacement needs for your 1969 RS Camaro! Learn More

Was: $79.99 pr.

Now: $59.99 pr.

Camaro Headlight Door Vacuum Actuator Support Bracket, Left, Rear, Rally Sport (RS), 1969 Part # RS-34L
Reproduction Vacuum Actuator Support Bracket Accurate, Correct Geometry Reproduction Large Rear Stamped Steel EDP Coated To Ensure Rust Prevention Sold Individually, Fits Driver's (Left) Side For Rally Sport (RS) Models The headlight door assembly in your 1969 Rally Sport Camaro has several components to keep it together, one of which is the vacuum actuator support bracket. Over time, these steel brackets can rust and wear down, growing weak and not maintaining the hold in your actuator assembly. Replace your actuator support brackets today. Rick's Camaros offers this accurate, correct geometry reproduction vacuum actuator support bracket for your headlamp assembly. This bracket is stamped steel, with accurate stampings to ensure correct headlamp cover geometry. This technically correct large rear support bracket is EDP coated to ensure rust prevention for years to come, and will fit the driver's side rear fender well to fender extension. Trust Rick's Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro RS! Learn More
$24.99 ea.
Camaro Headlight Door Conversion Kit, Vacuum To Electric, Rally Sport (RS), 1968 Part # DS-57
Great Upgrade From Vacuum Easy Installation Direct Bolt-In DSE's RS Headlight Door Kit replaces the stock vacuum actuated system on an RS headlamp equipped 1968 Camaro. It also makes converting your non-RS Camaro to hide-away headlights much easier. When installed, this kit will operate the headlight doors more reliably, smoother, and without the complicated and bulky vacuum accessories. Vehicles with large cams and low vacuum signals will also benefit from this system. The RS Headlight kit uses current sensing technology to provide a system that needs no adjustment and is extremely safe. DSE has gone to great lengths to provide you with the highest quality, best engineered product available with the easiest installation and minimal modification to your vehicle. The kit comes complete with everything needed for installation including two electric actuators, a control module, harness, mounting brackets, and hardware. Learn More
$489.99 Kit
Camaro Headlight Door Vacuum Actuator Support Bracket, Right, Rear, Rally Sport (RS), 1969 Part # RS-34R
Reproduction Vacuum Actuator Support Bracket Accurate, Correct Geometry Reproduction Large Rear Stamped Steel EDP Coated To Ensure Rust Prevention Sold Individually, Fits Passenger's (Right) Side For Rally Sport (RS) Models The headlight door assembly in your 1969 Rally Sport Camaro has several components to keep it together, one of which is the vacuum actuator support bracket. Over time, these steel brackets can rust and wear down, growing weak and not maintaining the hold in your actuator assembly. Replace your actuator support brackets today. Rick's Camaros offers this accurate, correct geometry reproduction vacuum actuator support bracket for your headlamp assembly. This bracket is stamped steel, with accurate stampings to ensure correct headlamp cover geometry. This technically correct large rear support bracket is EDP coated to ensure rust prevention for years to come, and will fit the passenger's side rear fender well to fender extension. Trust Rick's Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro RS! Learn More
$24.99 ea.
Camaro Headlight Door Relay, Rally Sport (RS), 1967 Part # RS-22
Premium Quality Headlight Relay Replaces Original Exactly Fits 1967 Camaros   You’re in your 1967 Chevrolet Camaro, enjoying a late night on the road, and your headlight goes out. The consequences could include not seeing obstacles in the road, being on the Police car radar, as well as just making your Camaro look sub-par! The problem could be your Camaro’s headlight actuator relay. When you turn on your headlights, you put power to the coil of a relay, which closes the electrical contact to your headlights. If the relay has gone bad, obviously an electrical contact cannot be made, and you will be out of luck as far as getting proper light coming from your Camaro when you need it. Rick’s Camaros wants to help you solve this problem by providing premium quality headlight relays. It’s time to get back on the road without any chances of being pulled over or getting into a wreck. Your 1967 Camaro was made to be noticed, but not for any imperfections! Replace your headlight relay right away, with Rick’s Camaros. Learn More
$12.99 ea.
Camaro Headlight Door Vacuum Hose Kit, Rally Sport (RS), 1969 Part # RS-38
Reproduction Vacuum Hose Kit Show Quality Set USA Made Hoses With Correct Colored Stripes Correct Color & Diameter Reproduction T-Fittings Installation Instructions Included For Rally Sport (RS) Models The headlight door assembly in your 1969 Rally Sport Camaro has several components to keep it together, including the hose assembly. Over time, these hoses can become worn down or tear, and will need to be replaced to keep your vacuum hose assembly working properly. Replace your headlamp vacuum hoses today. Rick's Camaros offers this show quality headlight hose kit, including correct deep impregnated color stripe-coded, precut original weight hoses, all with correct color and diameter reproduction T-fittings, firewall grommets, filter, check valve, original style straps, and instructions. This kit is 100% USA made, and has all the parts you'll need for your vacuum assembly. Trust Rick's Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro RS! Learn More
$82.99 ea.
Items 1 to 24 of 69 total Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Grid  List 
3