Product Experts Available 1-800-359-7717

CAMARO HEADLAMP COMPONENTS FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (50)
  2. (1)
  3. (9)
  4. (1)
  5. (8)
  6. (1)
  7. (1)
PRICE RANGE
  1. (14)
  2. (26)
  3. (49)
  4. (9)
 
Items 1 to 24 of 98 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Grid  List 
Camaro Headlight Retaining Ring, 1967-1975 Part # HH-15
Reproduction Of Original Round Inner Ring Which Holds The Headlight Bulb To The Headlight Bucket 1" Width 2 Required Per Car Comes With Screws With Oval Hole Replaces GM #5950248 Headlight bezels on your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, or 1975 Camaro take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro bezels start looking tired, and nothing looks worse on a fresh restoration than tired and worn headlight bezels. Rick's Camaros has the solution for you! Our Chevy Camaro headlight sealed beam retaining ring is an accurate reproduction, has correct ring width, and is in original high polished stainless material. The round inner ring holds the headlight bulb to the headlight bucket. From race, restoration or daily drivers, Rick's Camaros is always sourcing from the world’s top manufacturers to bring you the very best 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 Camaro headlight bezels possible. Learn More
$12.99 ea.
Camaro Headlight Adjusting Screw & Nut, 1967-1968 Part # HH-14
Reproduction Of Original Correct Screw and Nut Set Set Covers One Headlamp 4 Required Per Car Fits 1967 Or 1968 1st Gen Camaros The headlights are vital on your 1967 or 1968 first generation Camaro, especially when driving at night or in harsh weather conditions. It is possible over time that your head light assembly can become loose, and you may have misplaced your adjusting screw. Each headlamp required an adjusting screw and nut to keep it secure and ready to use while driving. Rick's Camaros offers this new headlight adjusting screw and nut for your F-Body, ready to install in your headlight. This set covers one of your Camaro's head lamps, however four are required to complete your car. Go ahead and get enough for each of your headlights so you can rest assured while on the road. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More
$1.50 Set
Camaro Headlight Sealed Beam, 1967-1981 Part # HH-18
High Quality Original Style Replacement 50 Watts Low Beam, 60 Watts High Beam Sealed Beam Dual Filament Sold Each Two Required per Car Correct T3 Headlights Available as our Part # LT-30 Is it time to refurbish the headlights on your beautiful 1967-1981 Chevrolet Camaro? Rick's Camaro's offers this replacement sealed beam headlight with the budget-minded Camaro restorer in mind. Not everyone needs technically correct T-3 headlights in their Chevy Camaro so Rick's found this bulb from a major replacement headlight manufacturer with that in mind. Don't drive down that long, dark road coming home from your local cruise in without the proper lighting in the front of your Camaro. Replace your old headlights on your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camero today with quality parts from Rick's Camaro. Learn More

Was: $11.99 ea.

Now: $9.99 ea.

Camaro Headlight Retaining Ring Mounting Screw Set, 1967-1973 Part # HH-17
Correct Reproduction Retains Headlamp Retaining Ring HH-15 1 Kit Required Per Car   Headlight bezels on your 1967, 1968, 1969, 1970, 1971, 1972, or 1973 Camaro take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro bezels start looking tired, and your headlight retaining ring has trouble holding the headlight bulb to the headlight bucket. Whether the screws have gotten lost are broken, the retaining ring will no longer be able to retain your Camaro's headlight. Rick's Camaros has the solution for you! Our Chevy Camaro headlight retaining ring mounting screw set is a kit made up of six mounting screws. This set is all you need to keep your headlight bulbs secure.. From race, restoration or daily drivers, Rick's Camaros is always sourcing from the world’s top manufacturers to bring you the very best 1967, 1968, 1969, 1970, 1971, 1972, or 1973 Camaro headlight bezels possible. Learn More
$2.99 Set
Camaro Headlight Adjusting Screw & Nut, 1969 Part # HH-19
Correct screw and nut set for 69. Four sets required per car. Learn More
$1.99 ea.
Camaro Headlight Bucket Hardware Set, 1970-1981 Part # 734009
Restoration Correct Replacement Set For Installation Of Two Headlights This 1970-1981 Camaro replacement headlight bucket hardware set has been manufactured to meet or exceed factory specifications and performance. Ricks Camaros offers this quality replacement set for your restoration project. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Ricks Camaros has sourced this headlight bucket hardware set among other possible parts as the best choice for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro repair or restoration project. Trust Ricks Camaros for all your parts needs. Learn More
$16.99 Set
Camaro Headlight Bucket, Left, 1967-1969 Part # HH-7
Best Quality Reproduction Camaro Headlight Bucket Stamped Steel Construction Black EDP Coated To Ensure Rust Prevention Fits Driver's (Left) Side Replaces GM #5957684 Camaro headlight buckets are right out front and prone to rust from weather conditions, and crash collision damage. Rick's Camaros offers only the best parts at the best possible price. If you need a head light bucket for the sealed beam on your 1967, 1968 or 1969 standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 coupe or convertible, we have it in stock and ready to ship. This headlamp capsule bucket is made from stamped steel and is EDP coated to ensure that you will not have to worry about future rust problems. This bucket will fit the driver's side of your F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! NOTE: The 69 RS Camaro only uses a RH bucket on the left (driver's) side, and a LH bucket on the right (passenger's) side! Learn More
$28.99 ea.
Camaro Headlight Bucket, Right, 1967-1969 Part # HH-8
Best Quality Reproduction Camaro Headlight Bucket Stamped Steel Black EDP Coated To Ensure Rust Free Delivery Fits Passenger's Side Replaces GM #924535 Being placed right on the front of the car, your headlight buckets on your 1967, 1968, or 1969 Camaro are heavily prone to rust and collision damage. Being so susceptible to damage and being one of the first things that people see on your car, damaged headlight buckets can really take away from the overall great look of your Camaro. Rick's Camaros offers only the best parts at the best possible price, and this headlight bucket, for the passenger's side is a high quality reproduction of your original headlight part, in stamped steel and EDP (Electro Deposit Primer) coated to ensure a rust resistant finish. If you need a head light bucket for the sealed beam on your 1967, 1968 or 1969 1st gen standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 coupe or convertible, Rick's Camaros is here to give you what you need. Trust Rick's Camaros for all of your restoration and replacement needs! NOTE: The 69 RS Camaro only uses a RH bucket on the left (driver's) side, and a LH bucket on the right (passenger's) side! Learn More
$28.99 ea.
Camaro Headlight Bezel, For Cars With Standard Trim (Non-Rally Sport), With Chrome Trim Ring, Right, 1969 Part # HB-7
Reproduction Of Original Officially Licensed GM Restoration Part Bright Chrome & Black Matte Die Cast Trim  Includes Chrome Trim Ring Correct For Cars With Style Trim Option (Z21) Fits Passenger's Side Replaces GM #3962902 1969 Camaro headlight bezels take hits over the years, leaving them less than perfect. Harsh weather conditions batter your Camaro headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro headlight bezels start looking tired, and nothing looks worse on a fresh restoration than worn headlight bezels. Rick's Camaros has the answer for you! These Chevy Camaro headlight bezels are made from bright chrome and black matte die cast trim to bring the best and brightest finish. This officially GM licensed headlamp bezel also includes a chrome trim ring, and will fit the passenger's side of your F-Body with standard trim. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1969 non Rally Sport Camaro! Learn More
$58.99 ea.
Camaro Headlight Bezel, For Cars With Standard Trim (Non-Rally Sport), With Chrome Trim Ring, Left, 1969 Part # HB-8
Reproduction Of Original Officially Licensed GM Restoration Part Bright Chrome & Black Matte Die Cast Trim  Includes Chrome Trim Ring Correct For Cars With Style Trim Option (Z21) Fits Driver's Side Replaces GM #3962901 1969 Camaro headlight bezels take hits over the years, leaving them less than perfect. Harsh weather conditions batter your Camaro headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro headlight bezels start looking tired, and nothing looks worse on a fresh restoration than worn headlight bezels. Rick's Camaros has the answer for you! These Chevy Camaro headlight bezels are made from bright chrome and black matte die cast trim to bring the best and brightest finish. This officially GM licensed headlamp bezel also includes a chrome trim ring, and will fit the driver's side of your F-Body with standard trim. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1969 non Rally Sport Camaro! Learn More
$58.99 ea.
Camaro Headlight Bezels, Left & Right, Rally Sport (RS), 1967-1968 Part # HB-4P
Best Quality Reproduction RS Headlight Bezels Officially Licensed GM Restoration Part OE Thickness Anodized Aluminum Bonded Black Matte Finish Fits Boths Left & Right Headlamps For 1967 & 1968 Rally Sport (RS) Camaro Only 1967-1968 Camaro Rally Sport (RS) headlight bezels take hits over the years, leaving them less than perfect. Harsh weather conditions batter your Camaro headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your 1967-1968 Chevrolet Camaro headlight bezels start looking tired, and nothing looks worse on a fresh restoration than worn headlight bezels. Rick's Camaro has the answer for you! Our Chevy Camaro headlight bezels are made from premium grade polished aluminum, stamped to proper shape with correct automotive anodizing to bring the best and brightest finish. Correct black inlay is carefully applied to make your officially GM licensed Camaro headlight bezels pop. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 Camaro RS! Learn More
$79.99 pr.
Camaro Headlight Door Shouldered Mounting Bolts, Rally Sport (RS), 1967-1969 Part # RS-12
Reproduction Headlight Assembly Bolt Kit 3 Piece Set Plated Set Finishes One Headlamp Assembly For Rally Sport Models When replacing your front headlight assembly on your 1967, 1968, or 1969 Rally Sport Camaro, you will need new bumpers, bolts, and bushings as well. Whether the headlight door has rusted or come apart, it would be not smart to replace it with your same old bolts and bushings, which have most likely become worn down themselves. Rick's Camaros offers this reproduction headlight door shouldered mounting bolt kit for your RS F-Body, including three mounting bolts just like the original hinge and door special shouldered bolts. This 3-bolt set will complete one of your headlamp door assemblies. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen RS Camaro! Learn More
$8.99 Set
Camaro Retaining Ring, Headlamp Seal Beam, Stainless Steel, 1970-1973 Part # 33-10119
Reproduction Of Original Round Inner Ring Which Holds The Headlight Bulb To The Headlight Bucket 1" Width 2 Required Per Car Comes With Screws With Notch Replaces GM #5950248 Headlight bezels on your 1970, 1971, 1972, or 1973 Camaro take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro bezels start looking tired, and nothing looks worse on a fresh restoration than tired and worn headlight bezels. Rick's Camaros has the solution for you! Our Chevy Camaro headlight sealed beam retaining ring is an accurate reproduction, has correct ring width, and is in original high polished stainless material. The round inner ring holds the headlight bulb to the headlight bucket. From race, restoration or daily drivers, Rick's Camaros is always sourcing from the world’s top manufacturers to bring you the very best 1970, 1971, 1972, or 1973 Camaro headlight bezels possible. Learn More
$14.99 ea.
Camaro Headlight Door Bushing Kit, Rally Sport (RS), 1968-1969 Part # RS-15
Reproduction Headlight Assembly Kit 24 Piece Set Includes All Headlamp Assembly Bushings, Wave Washers, & Clevis Pin Bushings For Rally Sport Models When replacing your front headlight assembly on your 1968 or 1969 Rally Sport Camaro, you will need new bumpers, bolts, and bushings as well. Whether the headlight door has rusted or come apart, it would be not smart to replace it with your same old bushings, which have most likely become worn down themselves. Rick's Camaros offers this reproduction headlight door bushing kit for your RS F-Body, including all headlamp assembly bushings, wave washers, and clevis pin bushings. This is a full 24 piece set for completing your head light door assemblies on your RS. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen RS Camaro! Learn More
$19.99 Kit
Camaro Headlight Bezels, For Cars With Standard Trim (Non-Rally Sport), Left & Right, 1968 Part # HB-12
Show Quality Licensed Reproduction Bright Anodized Edges as Original Bonded Matte Black Finish Pair, RH/LH The headlight bezels on your 1968 standard Camaro are out in front just like your grille. Everyone can see how the elements have not been kind to your original headlight bezels. The anodizing can haze over time and the black finish can be chipped by all sorts of things coming up off of the road. Original GM bezels were "squared off" on the leading edges unlike the later, "rounded" GM replacements and other reproductions available in the marketplace. Rick's has sourced this top-quality reproduction pair of headlight bezels with the squared edges to keep your 1968 Camaro looking its best. Learn More
$73.99 pr.
Camaro Headlight Bezels, For Cars With Standard Trim (Non-Rally Sport), Left & Right, 1967 Part # HB-1P
High Quality Accurate Reproductions Bezels Polished Anodized Aluminum With Bonded Matte Black Insert Coating As Original Comes As A Pair For Both Left & Right Headlamp Officially Licensed GM Part Front headlights can become scratched, discolored, or broken, leaving you in danger when driving at night or in harsh weather conditions in your 1967 Camaro with standard trim. Be sure that you are keeping up with the condition of your headlamps. Along with getting new headlamps, you will most likely need new headlamp gaskets, which can get scratched and rusted themselves. Rick's Camaros offers this pair of standard head lamp bezels for your F-Body. These high quality accurate reproduction bezels are polished anodized aluminum with black insert coating. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 non-Rally Sport 1st gen Camaro! Learn More
$73.99 pr.
Camaro Headlight Bezel, Right, 1970-1973 Part # 702084
Stock Replacement Officially Licensed GM Restoration Part Original Thickness High Polished Anodized Aluminum OE Gauge Stampings Fits Passenger's Side Replaces GM #3962944 1970, 1971, 1972, or 1973 Camaro headlight bezels take hits over the years, leaving them less than perfect. Harsh weather conditions batter your Camaro headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro's headlight bezels start looking tired, and nothing looks worse on a fresh restoration than worn headlight bezels. Rick's Camaro has the answer for you! Our Chevy Camaro headlight bezels are made from premium grade high polished anodized aluminum, stamped to proper shape with correct automotive anodizing to bring the best and brightest finish. This officially GM licensed headlamp bezel is made from correct original thickness and OE gauge stampings, and promises an exact fit on the passenger's side of your F-Body. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, or 1973 2nd gen Camaro! Learn More
$44.99 ea.
Camaro Headlight Bezel, Left, 1970-1973 Part # 702085
Stock Replacement Officially Licensed GM Restoration Part Original Thickness High Polished Anodized Aluminum OE Gauge Stampings Fits Driver's Side Replaces GM #3962943 1970, 1971, 1972, or 1973 Camaro headlight bezels take hits over the years, leaving them less than perfect. Harsh weather conditions batter your Camaro headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro's headlight bezels start looking tired, and nothing looks worse on a fresh restoration than worn headlight bezels. Rick's Camaro has the answer for you! Our Chevy Camaro headlight bezels are made from premium grade high polished anodized aluminum, stamped to proper shape with correct automotive anodizing to bring the best and brightest finish. This officially GM licensed headlamp bezel is made from correct original thickness and OE gauge stampings, and promises an exact fit on the driver's side of your F-Body. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, or 1973 2nd gen Camaro! Learn More
$44.99 ea.
Camaro Headlight Door Hinge Long Pivot Bolt & Nut, Rally Sport (RS), 1967-1969 Part # RS-11
Reproduction Headlight Assembly Hinge Pivot Bolt Long Pivot Bolt & Nut Plated For Rally Sport Models When replacing your front headlight assembly on your 1967, 1968, or 1969 Rally Sport Camaro, you will need new bumpers, bolts, and bushings as well. Whether the headlight door has rusted or come apart, it would be not smart to replace it with your same old bolts and bushings, which have most likely become worn down themselves. Rick's Camaros offers this reproduction headlight door hinge long pivot bolt and nut for your RS F-Body. This pivot bolt is plated and has a nut attached to mount on your headlight door assembly. These are sold individually. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen RS Camaro! Learn More

Was: $6.99 ea.

Now: $5.99 ea.

Camaro Headlight Bezel, For Cars With Standard Trim (Non-Rally Sport), Without Chrome Trim Ring, Left, 1969 Part # HB-6
Accurate Reproduction Of Original Officially Licensed GM Restoration Part Without Chrome Trim Correct For Cars With Standard Trim Fits Driver's Side Replaces GM #3935927 1969 Camaro headlight bezels take hits over the years, leaving them less than perfect. Harsh weather conditions batter your Camaro headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro headlight bezels start looking tired, and nothing looks worse on a fresh restoration than worn headlight bezels. Rick's Camaros has the answer for you! These Chevy Camaro headlight bezels are made from high quality materials to bring the best and brightest finish. This officially GM licensed headlamp bezel does not include the chrome trim, and will fit the passenger's side of your F-Body with standard trim. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1969 non Rally Sport Camaro! Learn More

Was: $33.99 ea.

Now: $31.99 ea.

Camaro Headlight Bezel, For Cars With Standard Trim (Non-Rally Sport), Without Chrome Trim Ring, Right, 1969 Part # HB-5
Accurate Reproduction Of Original Officially Licensed GM Restoration Part Without Chrome Trim Correct For Cars With Standard Trim Fits Passenger's Side Replaces GM #3935928 1969 Camaro headlight bezels take hits over the years, leaving them less than perfect. Harsh weather conditions batter your Camaro headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro headlight bezels start looking tired, and nothing looks worse on a fresh restoration than worn headlight bezels. Rick's Camaros has the answer for you! These Chevy Camaro headlight bezels are made from high quality materials to bring the best and brightest finish. This officially GM licensed headlamp bezel does not include the chrome trim, and will fit the passenger's side of your F-Body with standard trim. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1969 non Rally Sport Camaro! Learn More

Was: $33.99 ea.

Now: $31.99 ea.

Camaro Headlight Door Hinge Plate, Rally Sport (RS), 1967-1968 Part # RS-10
Nice Reproduction Headlight Door Hinge Plate Die-Cast & Unpainted As Original Fits Either Driver's Or Passenger's Side Headlight For Rally Sport (RS) Models The headlight door hinge plate on your 1967 or 1968 Rally Sport Camaro can be victim to rust over time, causing the hinge plate to not move smoothly. Enduring too much damage could mean trouble for your headlight assembly. Rick's Camaros is happy to offer reproduction headlight door hinge plates for your F-Body, diecast and unpainted as the originals. These hinge plates are sold individually and will fit either the driver's side or passenger's side headlight. Replace your headlight door components now and stay safe on the road! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 Camaro RS! Learn More
$21.99 ea.
Camaro Headlight Bezel, Except Z28, Right, 1978-1981 Part # 702089
Stock Replacement Original Thickness High Polished Anodized Aluminum Fits Passenger's Side 1978, 1979, 1980, 1981 Camaro headlight bezels take hits over the years, leaving them less than perfect. Harsh weather conditions batter your Camaro headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro's headlight bezels start looking tired, and nothing looks worse on a fresh restoration than worn headlight bezels. Rick's Camaro has the answer for you! Our Chevy Camaro headlight bezels are made from premium grade high polished anodized aluminum, stamped to proper shape with correct automotive anodizing to bring the best and brightest finish. This  headlamp bezel is made from correct original thickness  and promises an exact fit on the passenger's side of your F-Body. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1978, 1979, 1980, 1981! Learn More

Was: $74.99 ea.

Now: $64.99 ea.

Camaro Headlight Door Bellcrank Over-Center Spring, Rally Sport (RS), 1969 Part # RS-13
Reproduction Over Center Mechanism Spring Plated One Required Per Headlamp Assembly For Rally Sport (RS) Models The headlight door assembly in your 1968 Rally Sport Camaro has several components to keep it together, one of which is the bellcrank over center spring. Over time, this spring can rust and wear down, growing weak and not maintaining the hold in your bellcrank assembly. Replace your bellcrank over center spring today. Rick's Camaros offers this accurate over center bellcrank spring for your headlamp assembly. This bellcrank spring is plated, with only one being required per headlight. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 1st gen Camaro RS! Learn More
$7.99 ea.
Items 1 to 24 of 98 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Grid  List 
3