Product Experts Available 1-800-359-7717

CAMARO LOUVERS FOR ALL YEARS AND MODELS

Rick's Camaros is your one-stop shop to find all your Camaro louvers at the lowest prices around. Camaro louvers consist of horizontal slats across the surface of a mirror, light or fender. If you want the coolest Camaro fender louvers or taillight louvers, then you've come to the right place. You won't find higher quality louver sets anywhere else, so shop Rick's Camaros today.

Filter Your Result

CATEGORY
  1. Front Louvers (16)
  2. License Plate Louvers (1)
  3. Side Louvers (2)
BRAND
  1. (1)
  2. (2)
  3. (1)
  4. (2)
  5. (1)
  6. (2)
  7. (4)
  8. (1)
PRICE RANGE
  1. (3)
  2. (1)
  3. (9)
  4. (4)
 
17 Item(s) Show per page Grid  List 
Camaro Louver,Super Sport (SS) Hood, 1968-1969 Part # HD-10
Reproduction of Original "Stack" Style Ornaments Die Cast Chrome with Painted Black Accents For 68-69 SS, SS/RS 350 or 396 Cars with Super Sport Hood Includes Mesh Screens & Backing Plates Distinct LH and RH Sides as Original  Rick's brings you this nice reproduction of the Camaro SS hood louvers. Original die cast hood louvers are prone to peeling and pitting from contact with the elements for so many years. Replace your original hood lovers today with this nice reproduction and keep all your chrome show fresh. These hood ornament louvers are for your F-Body's Super Sport hood have a chrome finish and include mesh screens and backing plates. This pair will complete both the driver and passenger's side. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! NOTE: Camaro SS hood louvers cannot be cleaned with solvents, pressure washed or "scrubbed" with a brush. The black painted accents are paint over chrome and as a result are very fragile. Learn More
$144.99 pr.
Camaro Super Sport (SS) Hood Louver Gaskets, 1967 Part # HD-13
Correct Reproduction of Original Thick, Die-cut as Original  Sold as a Pair One Pair Needed per SS Hood  Replacement Gasket Available as our Part # HD-11 Rick's First Generation brings you a correct reproduction hood ornament gasket seal. This seal fits nicely between the hood and the 1967 SS finned hood ornament to seal out rain and road grime. Do your restoration right the first time with quality parts from Rick's First Generation.   NOTE: Gasket will not work for 1968-69 "Stack" style hood ornaments due to the beveled bottom on the ornament itself.     Learn More
$7.99 pr.
Camaro Hood Louver Drains, SS, 1967-1969 Part # HD-52
Reproductions Of Orignal These Camaro reproduction hood louver drains have been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using reproduction hood louver drains from Rick's will add authenticity and value to your Camaro. Learn More

Was: $31.99 pr.

Now: $9.99 pr.

Camaro Cowl Induction & SS Hood Ornament Seal, 1967-1969 Part # HD-11
Replacement Foam Seal with Adhesive Backing One Required for Cowl Hood Flapper Valve Frame Two Required for SS Hood Ornaments 1967 Original Style Gaskets Available as our Part # HD-13 Rick's First Generation brings you a nice replacement hood seal for the budget-minded Camaro restorer. Original 1967 SS hood gaskets were die-cut, flat gaskets while the 1968-69 SS hood gaskets were molded, beveled seals. This replacement hood gasket will function properly for the SS hood when installed. The same is true for sealing the 1969 Cowl Induction flapper valve frame to the opening on the Cowl Induction hood.   NOTE: Gasket is shipped rolled in a coil and must be applied to the hood prior to the installation of the hood louvers or flapper valve frame.   Learn More
$6.99 ea.
Camaro Super Sport (SS) Hood Louvers, Finned, Driver Quality, 1967 Part # HD-54
Reproduction Of Original Excellent Quality A+ A Great Price Note: All 1967 & All 1968 SS-350 Models Used These Hood Louvers This Camaro reproduction super sport (ss) hood louvers has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction super sport (ss) hood louvers from Rick's will add authenticity and value to your Camaro. Did you know? Many people in our hobby refer to these hood louvers as hood ornaments Learn More
$147.99 pr.
Camaro Super Sport (SS) Hood Louver, Finned, Show Correct, 1967 Part # HD-27
Reproduction Of Original Best Reproduction Available Flawless Quality Made By Trim Parts 2 Required Per Car Note: All 1967 & All 1968 SS-350 Models Used This Hood Louver Did You know? Many people in our hobby refer to the hood louver as a hood ornament. Learn More
$112.99 ea.
Camaro Chrome Hood Louver Ornaments, 2010-2013 Part # 702220
1969-Style "Ice-Cube Trays" Are Made From Thermoformed TPO Plastic Chrome-Tech™ Chrome Laminated Finish Will Never Rust, Crack, Chip Or Peel Easily Installed Without Any Permanent Modifications To The Car Self-Adhesive No Drilling Required Retro USA's 68'-69' styled Hood Vents give your Camaro a nostalgic and aggressive look. Hood Vents are chrome-plated injection molded ABS with painted flat black accents and uses stainless steel wire mesh. Pre-taped with 3M™ attachment tape plus pigtails insure easy and accurate installation. No permanent modifications are required. Learn More
$239.99 pr.
Camaro Z28, Iroc RH Hood Ornament (Louver), 1985-1990 Part # 720642
Original GM Part Fits Passenger Side Use Qty 2 Of Part # 720643 To Mount NOTE: Not For Use With Standard Hood Learn More
$236.99 ea.
Camaro Super Sport (SS) Hood Louver Ornaments, Polished Billet, 1968-1969 Part # HD-39
Replacement Hood Ornaments Billet Construction, That Will Not Flake Or Peel Like Originals Beautiful Polished Finish Fits The Stock Super Sport Hood Hood Gasket Available Separately As Our Part # HD-11 Finally someone has manufactured a hood louver that will stand the elements without the finish peeling or flaking off. These beautiful polished billet Camaro hood louvers are machined from one piece of billet and then polished to a briliant luster. These polished billet hood louvers from Rick's Camaros will be great final touch or upgrade to your Camaro. Learn More

Was: $399.99 pr.

Now: $374.99 pr.

Camaro License Plate LED Conversion Set, Oracle, Cool White, Universal Fit Part # 33-11636
Oracle LED License Plate Conversion Kit Super Bright 3-Chip 5050 SMD Technology Replaces 194, 168, 158, 2825, 192, etc 360 Degree Wide Viewing Angle 100,000 Hours Lifetime Rating Universal Fit A Camaro license plate LED conversion kit is a great way to give your classic an upgraded, high-tech look. These small but efficient bulbs pack a punch, offering higher quality and a more defined license plate lamp. With the Oracle name behind them, these lights offer the premium in brightness and quality and are rated with a 100,000 hours lifetime rating. The 5050 SMD technology produces pronounced lighting, sharp hues, while using 1/10 the power of a factory bulb. T10 LEDs are an everyday wedge-bulb with a 10mm base. They are often found in license plate lights, dome lights, map lights, trunk lights, and sidemarker lights. These are also referred to as 168, 194, 158, 2825, 192, 211-2, etc depending on the manufacturer. When you are in the market to upgrade or replace your cars exterior lighting, invest in a Oracle Camaro license plate LED set. Available at Rick's Camaro today! Learn More
$26.99 pr.
Camaro Chrome Side Vents, DefenderWorx, 2010-2014 Part # 33-11769
T-6061 Aluminum Construction Chrome Finish Attaches With 3M Tape Set Camaro chrome side vents will add exterior appeal to your 2010, 2011, 2012, 2013, or 2014 Camaro. Manufactured by DefenderWorx from billet aluminum, these accesories are durable and will add brilliant cosmetic appeal. When you are looking to upgrade the exterior of your 2010, 2011, 2012, 2013, or 2014 Camaro, invest in a DefenderWorx chrome side vent set. Learn More
$194.99 Set
Camaro Quarter Panel Side Molding Set, Carbon Fiber Finish, 2010-2014 Part # 33-11860
1969-Style Louvers Are Made From Thermoformed TPO Plastic Carbon Fiber Finish Will Never Rust, Crack, Chip Or Peel Easily Installed Without Any Permanent Modifications To The Car Self-Adhesive No Drilling Required A Camaro quarter panel molding set with a carbon fiber finish is the perfect item to accent your high-performance 2010, 2011, 2012, 2013, or 2014 Camaro. The thermoplastic construction will not rust or crack and the carbon fiber finish will add a racers edge. No drilling is required for application of these louvers. They feature pre-installed 3M tape to streamline your 2010, 2011, 2012, 2013, or 2014 Camaro's renovation. When looking to upgrade your 5th Gen Camaro, look no further. Invest in RetroUSA carbon fiber quarter panel side moldings today. Available at Rick's Camaro. Learn More
$229.99 pr.
Camaro Polished Side Vents, DefenderWorx, 2010-2014 Part # 33-11770
T-6061 Aluminum Construction Polished Finish Attaches With 3M Tape Made In USA Set Camaro polished side vents will add exterior appeal to your 2010, 2011, 2012, 2013, or 2014 Camaro. Manufactured by DefenderWorx from billet aluminum, these accesories are durable and will add brilliant cosmetic appeal. When you are looking to upgrade the exterior of your 2010, 2011, 2012, 2013, or 2014 Camaro, invest in a DefenderWorx polished side vent set. Learn More
$129.99 Set
Camaro Hood Vents, Carbon Fiber Finish, 2010-2014 Part # 33-11861
1969-Style Louvers Are Made From Thermoformed TPO Plastic Carbon Fiber Finish Will Never Rust, Crack, Chip Or Peel Easily Installed Without Any Permanent Modifications To The Car Self-Adhesive No Drilling Required A Camaro hood vent with a carbon fiber finish is the perfect item to accent your high-performance 2010, 2011, 2012, 2013, or 2014 Camaro. The thermoplastic construction will not rust or crack and the carbon fiber finish will add a racers edge. No drilling is required for application of these louvers. They feature pre-installed 3M tape to streamline your 2010, 2011, 2012, 2013, or 2014 Camaro's renovation. When looking to upgrade your 5th Gen Camaro, look no further. Invest in RetroUSA hood vents today! Available at Rick's Camaro. Learn More
$279.99 pr.
Camaro Chrome Appearance Kit, 2010-2013 Part # 702274
Save Money By Ordering The Kit Includes Front And Rear Bumpers, Rocker Moldings, Quarter Louvers And Hood Vents Chrome-Tech™ Chrome Laminated Finish Will Never Rust, Crack, Chip Or Peel Easily Installed Without Any Permanent Modifications To The Car Self-Adhesive No Drilling Required Retro Your Ride with the complete kit.   Kit Includes:   Retro USA Chrome-Tech™ Camaro Front Bumper-P/N702211   Retro USA Chrome-Tech™ Camaro Rear Bumper-P/N702213   Retro USA Chrome-Tech™ Camaro Rocker Molding P/N-702214   Retro USA Camaro Chrome Quarter Molding Set P/N-702219   Retro USA Camaro Hood Vents P/N-702220 Inspired by the icons of the 60' and 70's, yet designed with the latest technology. Chrome-TechTM Accessories are constructed using chrome film laminated to TPO, the gold standard in automotive plastic. The results are an extremely durable, lightweight, and easy to install product. The chrome film offers the luster of chrome with the advantages of excellent UV protection and resistance to chipping and chemicals. Chrome film is guaranteed to not rust, crack, flake or peel. Learn More
$1,529.99 Kit
Camaro Billet Hood Vents, SS Style, 2010-2014 Part # 33-12669
Features Easy Installation Features 8 Different Color Options Features Classic SS Styling Cues Machined From High Quality Aluminum Made In The USA The classic hood vents for your 2010, 2011, 2012, 2013, or 2014 Camaro are specially designed for the 5th gen Camaro. The bottom of the base is 3-D machined to fit the contour of the hood. They are installed by drilling two small holes on your hood and are non-functional. Available with a machined finish, polished finished, clear anodized finish, and five different colors. Trust Rick's Camaro for all your performance needs. Learn More
$324.99 pr.
Camaro Hood Louvers, Pair, Z-28 And IROC-Z, 1985-1990 Part # 33-13838
Pre-Order Now - Avalible Spring 2015! Pre-Order Now At The Special $249.99 Price - So Order Now!! Save $50.00 Off The Regular Price With Your Pre-Order You WIll Not Be Billed Until Your Order Ships High Quality Reproduction Hood Louvers Made From Durable Molded Plastic Molded In Correct Flat-Black Finsh Louvers Have Correct Spacing And Pitch Correct Mounting Pin Placement For Very Easy To Installation Sold As A Pair 1985-1990 Camaro is a standard American muscle car classic. Ricks Camaros offers these quality replacement, Hood Louvers, Pair, Z-28 And IROC-Z, for your restoration project or part replacement. These hood louvers are made from durable molded plastic, the original hood louvers were made from aluminum and are prone to bending, fading and warping. These high quality replacement hood louvers will give you the best of everything, original looks with a long lasting, durable finish, that will stand up to the elements and the test of time. These louvers also have the original pin placement, making installation very easy. When these hood louvers were offered by Chevrolet, they sold for over $300 EACH! Now you can get a complete set for less!  Also note that the original replacement hood louvers from Chevrolet, were made from plastic. So you will be getting a higher quality replacment, than the factory offered from their parts department.  Do not settle for just any replacement parts for your 1985, 1986, 1987, 1988, 1989, 1990 Camaro, use only the best replacement parts for your prized ride. Trust Ricks Camaros for all your part needs. NOTE: These Hood Louvers will also fit 1991-1992 Camaro Z28 And IROC-Z replacement hood, but will not be technically correct. Learn More
$249.99 pr.
17 Item(s) Show per page Grid  List 
1