Product Experts Available 1-800-359-7717

CAMARO WINDSHIELD MOLDINGS FOR ALL YEARS AND MODELS

Filter Your Results

 
20 Item(s) Sort by: Show: per page Grid  |  List
Camaro Windshield Molding Clip Set, Coupe, 1967-1969 Part # WM-26
Reproduction of Original Correct Height, Length and Profile 13 Clips Per Set End Clips Sold Separately as Part # WM-8 Replacement Pin Studs Available Separately as Part # WM-40 Fits 1967-1969 1st Gen Coupes The molding clips for your 1967, 1968, or 1969 first generation Camaro's windshield can often become cracked, brittle, or go missing over the years. The clips and pin studs at the windshield area are also prone to rust due to constant exposure to the elements. This all leaves your windshield moldings unprotected and unable to do their job fully. Rick's Camaros offers this set of reproduction clips which will attach the upper and side windshield moldings to the pin studs on the upper and side of the windshield frame on your Camaro F-Body Coupe. This set comes with 13 clips, all the correct height and length for your Coupe. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro Coupe!  Learn More
$9.99 Set
Camaro Windshield Lower Support Bracket, Coupe & Convertible, 1967-1969 Part # WM-21
Best Quality Reproduction Windshield Stop Bracket Rubber Coated End Sold Individually Two Required per Car Butyl Glass Seal Available Separately as Part # 88-0119-3 Fits 1967-1969 1st Gen Camaro Coupes & Convertibles This windshield lower support bracket is a quality reproduction for your original 1967, 1968, or 1969 first generation Camaro. If you have taken out the front windshield on your standard Camaro, Super Sport (SS), Rally Sport(RS) or Z28 during  your restoration, you have probably lost or damaged these support brackets. However, they are very important and need to be replaced! When the Camaro windshield is put in place over the butyl glass seal, these brackets keep the windshield from sliding down the windshield frame and becoming damaged or cracked. While sold separately, two are required to keep your windshield secure. Don't wait until your windshield glass is being replaced and you need this support bracket. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro coupe or convertible! Learn More

Was: $5.99 ea.

Now: $4.99 ea.
Camaro Windshield Molding Set, Coupe, Show Correct, 1967-1969 Part # WM-37
Officially Licensed GM Restoration Parts Highest Quality, Best Fitting Reproduction Available Manufactured From Original Thickness, Polished Stainless Steel, Unlike Other Reproductions Which Can Be 30% Thinner Includes Lower Molding End Clips & Injection Molded Plastic Body Spacers 5-Piece Kit Fits Camaro Coupe Only  This Camaro front windshield molding set is the best fitting reproduction Front windshield molding set available for your Camaro Coupe since it rolled down the assembly line. Other reproduction Camaro windshield molding sets are super-thin and require additional "massaging" to achieve an "OK" fit. Rick's offers this Officially licensed GM restoration coupe front glass molding set at a competitive price so you can do your Camaro restoration right the first time. Fits all Camaro Coupe including Super Sport (SS), Rally Sport (RS), Z28 and Standard in 1967, 1968, and 1969. Learn More

Was: $239.99 Kit

Now: $219.99 Kit
Camaro Windshield Molding Clip Set, 1974-1981 Part # 734064
Reproduction Of Original 1 Set Per Car   This Camaro reproduction windshield molding clip set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a windshield molding clip set from Eckler's will add authenticity and value to your Camaro. Learn More

Was: $12.99 Set

Now: $9.99 Set
Camaro Windshield Molding Kit, 1970-1981 Part # 711041
Reproduction Of Original For Front Windshield Glass Chrome Finish 5 Piece Kit With Retainers Fits 1970-1981 2nd Gen Camaros The windshield moldings on your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 second generation Camaro go through a lot of abuse over the years. From the harsh barrage of outside elements, the chrome moldings can become scratched, bent, cracked, or come off altogether. With broken or missing windshield moldings, your glass becomes exposed, not to mention your Rally Sport, Super Sport, Standard, Z28, or Type LT Camaro won't look its best when out on the road. Don't let this happen on your front windshield glass, and ensure that you have brand new moldings to keep your F-Body's exterior protected. Rick's Camaros is happy to offer this quality set of moldings for your front glass. This complete set of five pieces are made of polished chrome and include retainer clips. These moldings will easily replace your originals for a quick installation, and will protect your front glass for years to come. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 2nd gen Camaro! Learn More
$163.99 Kit
Camaro Windshield Molding Clip Set, 1970-1973 Part # 734067
Reproduction Of Original One Set Per Car   This Camaro reproduction molding clip set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction molding clip set from Eckler’s will add authenticity and value to your Camaro. Learn More
$9.99 Set
Camaro Windshield Molding Clip Set, Convertible, 1967-1969 Part # WM-36
Reproduction of Original Correct for Convertible Only 13 Clips Per Set Replacement Pin Studs Available Separately as Part # WM-40 Nice reproduction of clips which attach the upper and side windshield moldings to the pin studs on the upper and side of the windshield frame on the Camaro convertible. The clips and pin studs at the windshield area are prone to rust due to constant exposure to the elements. Replace the old clips on your Camaro before installing new windshield moldings with these reproductions from Rick's First Generation. Learn More
$9.99 Set
Camaro Windshield Molding Set, Coupe, 1967-1969 Part # WM-30
Restoration Correct Complete Windshield Set For Coupe Models Stainless Steel Construction May Need Slight Fitting Alterations Great For Affordable Restoration Project Fantastic Alternative To Expensive NOS Options Show Correct Version Available As P/N WM-37 1967-1969 Camaro is a timeless classic. Over time, the windshield molding trim on your 1967-1969 first generation Camaro can become worn down. From harsh weather conditions, temperatures, or other outside elements, your moldings can become scratched, rusted, or cracked and will continue to deteriorate with time, leaving your windshield edges unprotected. Rick's Camaros is happy to offer this good quality affordable windshield molding set for your F-Body Coupe. Made from stainless steel, this set is a great option for the casual restoration project for daily drivers who do not need show correct perfection. Whether it is your everyday car, a restoration for your kid, or just a casual replacement, we understand that not everyone needs the most expensive option for their Camaro, especially when a more affordable alternative will get the job done. These stainless steel moldings may need slight fitting alterations, but should make for a simple installation. This set of five molding pieces is a great replacement which will cover your front windshield glass for years to come. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all your restoration and replacement needs for your 1967, 1968, 1969 first generation Camaro Coupe! Trust Ricks Camaros for all your part needs. Learn More
$139.99 Kit
Camaro Lower Windshield Molding Clip Kit, 1967-1969 Part # 33-11179
High Quality Reproduction Windshield Molding Clip Set Correct Width, Length And Profile Does Both Lower Moldings And Corners Includes Eight Lower Clips And Two Corner Clips Windshield molding clips are a must have for your 1967, 1968 or 1969 Camaro restoration. While Rick's Camaros has always offered the lower and corner clips separately, we've now combined them in a handy kit. These clips are a nice reproduction of the clips which attach the lower windshield molding to the inner cowl panel and also the corner clips which hold the side moldings to the lower molding. With this handy new lower windshield molding kit, you'll have everything you need for your windshield installation close at hand. You can count on Rick's Camaros to be there for every step of your restoration. Learn More
$15.99 Kit
Camaro Windshield Molding Set, Convertible, Show Correct, 1967-1969 Part # WM-50
Officially Licensed GM Restoration Parts Highest Quality, Best Fitting Reproduction Available Manufactured From Original Thickness Polished Stainless Steel, Unlike Other Reproductions Which Can Be 30% Thinner Includes Injection Molded Body Spacers 5-Piece Kit   This has got to be the best fitting reproduction Front windshield molding set available for your Camaro Convertible since it rolled down the assembly line. Other reproductions are super-thin and require additional "massaging" to achieve an "OK" fit. This officially GM licensed Show Correct windshield molding kit has original thickness, heavyweight polished stainles steel, and pre-installed plastic trim spacers on the lower moldings. Rick's offers this Officially licensed five piece convertible front glass molding set at a competitive price so you can do your restoration right the first time. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro convertible! Learn More
$199.99 Set
Camaro Convertible Top Outer Pillar Post Molding, Right, 1967-1969 Part # CV-20
Trim molding on exterior front windshield pillar posts. Stainless steel as original. Protective plastic coating. Officially Licensed GM Restoration Parts from Classic Headquarters. Learn More
$59.99 ea.
Camaro Windshield Molding Clip Installation Tool, 1967-1969 Part # WM-17
Allows Easy, Safer Installation Of Clips No Risk Of Scratching The Paint Learn More
$23.99 ea.
Camaro Convertible Top Outer Pillar Post Molding, Left, 1967-1969 Part # CV-21
Trim molding on exterior front windshield pillar posts. Stainless steel as original. Protective plastic coating. Officially Licensed GM Restoration Parts from Classic Headquarters. Learn More
$59.99 ea.
Camaro Windshield Upper Molding, Coupe, 1967-1969 Part # WM-38
Reproduction Of Original Correct Thickness This Camaro reproduction windshield upper molding has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction windshield upper molding from Rick's will add authenticity and value to your Camaro. Learn More
$67.99 ea.
Camaro Windshield Side Molding, Coupe, Left, 1967-1969 Part # WM-41
Restoration Correct   Correct Thickness This 1967, 1968, 1969 Camaro reproduction windshield side molding has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction windshield side molding on your 1967, 1968, 1969 Camaro from Ricks Camaros will add authenticity and value to your Camaro. Learn More
$39.99 ea.
Camaro Windshield Side Molding, Coupe, Right, 1967-1969 Part # WM-39
Restoration Correct  Correct Thickness     This Camaro reproduction windshield side molding for your 1967, 1968, 1969 Camaro has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction windshield side molding on your 1967, 1968, 1969 Camaro from Rick's Camros will add authenticity and value to your Camaro. Learn More
$39.99 ea.
Camaro Windshield Molding Set, Convertible, 1967-1969 Part # WM-31
Eckler's Select Series All reproduction five piece kit specifically for convertibles includes upper molding, pair of side moldings and a pair of lower moldings. **Ships UPS Oversize**   Learn More
$141.99 Set
Camaro Windshield Lower Molding, Coupe, Right,1967-1969 Part # WM-42
Reproduction Of Original Correct Thickness Includes End Clip & Injection Molded Body Spacer This Camaro reproduction windshield lower molding has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction windshield lower molding from Rick's will add authenticity and value to your Camaro. Learn More

Was: $59.99 ea.

Now: $52.99 ea.
Camaro Windshield Lower Molding, Coupe, Left, 1967-1969 Part # WM-43
Reproduction Of Original Correct Thickness Includes End Clip & Injection Molded Body Spacer Can Be Cut Down For a Convertible This Camaro reproduction windshield lower molding has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction windshield lower molding from Rick's will add authenticity and value to your Camaro. Learn More

Was: $59.99 ea.

Now: $52.99 ea.
Camaro Windshield Side Molding, Coupe, Right, GM, 1967-1969 Part # WM-4
Original GM. Correct for coupes - cut off (shorten) length for use on convertible. Learn More
$69.99 ea.
20 Item(s) Sort by: Show: per page Grid  |  List
4