Product Experts Available 1-800-359-7717

CAMARO INTAKE MANIFOLD AND RELATED FOR ALL YEARS AND MODELS

Filter Your Results

 
20 Item(s) Sort by: Show: per page Grid  |  List
Camaro Carburetor Heat Shield, For Cars With Holley 4-Barrel Carburetor, 1967-1969 Part # RC-160
Reproduction Of Original Heat Shield Helps Prevent Fuel Vapor Lock & Fuel Preheating This Camaro reproduction carburetor heat shield has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction carburetor heat shield from Rick's will add authenticity and value to your Camaro. Learn More

Was: $33.99 ea.

Now: $29.99 ea.
Camaro Intake Manifold, 396/375hp, High Rise, Cast Aluminum, 1968-1969 Part # IMA-163
Reproduction Of Original Casting # 3933163 Fits 396ci & 427ci Rectangular Port This Camaro reproduction intake manifold has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction intake manifold Rick's will add authenticity and value to your Camaro. Learn More
$334.99 ea.
Camaro Intake Air Box Lid, LS1, SLP, 2000-2002 Part # 718408
Adds Up To 10 Rear Wheel Horsepower Improves Air Flow To Throttle Body By Eliminating Restrictive Stock Baffles Bolt-On Lid Learn More
$99.99 ea.
Camaro Intake Manifold, Small Block, Polished, Power Plus, 1970-1981 Part # 718316
Fully Show Polished Dual Plane 180° Design Provides Outstanding Power From Idle To 5500 RPM For 327 Or 350ci Engines NOTE: To use with Edelbrock carburetor, you must purchase adapter plate P/N 718405. The Power+Plus Manifold is a direct replacement for the stock manifold on 1967-81 Camaro non-EGR engines. Use the stock Quadra-Jet carburetor or a 500 to 650 cmf vacuum secondary carburetor. Kit includes adapter plate to permit use of popular square bore carburetors. Power+Plus manifolds are cast from steel molds, not from sand molds. Permanent molds provide a tighter grain casting thereby reducing the occurrence of porosity, which can mar the polished finish. Additionally east Power+Plus manifold is 100% pressure tested to eliminate any installation problems. This manifold accepts late model choke, water-neck, A/C, alternator and HEI. Has provision to add oil filler tube. Learn More
$279.99 ea.
Camaro AIRAID® Throttle Body Booster, 6.2L, 2010-2014 Part # 33-12092
Installs Using Common Tools Improves Throttle Body Air Flow Installation Instructions Included Made In The USA These throttle body boosters spin the incoming air as it passes through your throttle body and over the multitude of Econoaid blades. The turbulent air charge is carried through past intake valves for better atomization and more complete combustion! The Throttle Body Booster will give you a crisper throttle response, along with better Gas Mileage. A huge benefit of these spacers is the fuel savings. The Results of this fuel saving device will always vary depending on vehicle type, driving habits, age of the vehicle, and driving environment, among other factors. However, the average vehicle will see an extra 1-3 MPG and produce an extra 6-10 Ft.lbs of Torque, which can be felt from the increased low-end throttle response. These throttle body boosters will pay for themselves in no time at all, especially with current increasing gas prices. Click the E.O. number (D-520-4) to find out if your application is listed. If your application is not listed then your intake system is not legal for sale or use in California and some other states. Learn More
$27.99 Kit
Camaro Intake Manifold, 396/375hp, High Rise, Cast Aluminum, 1967-1968 Part # IMA-069
Reproduction Of Original Casting # 33885069 Rectangular Port, Open Plenum Design Installed in all 1967 Through December 1967 (68 Model Year) Fits L78 396/375 & L88 427/425-450 This Camaro reproduction intake manifold has been manufactured to original factory specifications using today's modern manufacturing techniques. This intake manifold was installed from the beginning of the 1967 model year through December 1967 of the 1968 model year. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction intake manifold Rick's will add authenticity and value to your Camaro. Learn More
$334.99 ea.
Camaro Intake Air Temperature Sensor Relocation Kit, 1985-1992 Part # 718449
Increases Performance Easy To Install Hardware Included The factory location for the IAT sensor allows it to be subjected to high underhood temperatures causing the incorrect signal to be sent to the car's computer. Engine timing can be retarded, causing a rich fuel condition which reduces power. This easy to install kit solves the problem, just plug it in & go. Kit includes: IAT sensor, CAD/CAM designed & CNC machined aluminum mount bracket with stainless steel hardware, 78" extension harness, cable ties & installation instructions.    Note: Only works on 5.7L TPI   Learn More
$49.99 Kit
Camaro Intake Manifold To Carburetor Adapter Plate, Edelbrock, 1970-1981 Part # 718405
Use For All Carburetors Except Stock Q-Jet Adapter Plate Allows The Use Of Aftermarket Holley Or Edelbrock Carburetors On Any Dual Plane, Dual Bolt Pattern Aftermarket Intake Manifold Did you know?Many people in our hobby refer to the Q-Jet as a Quadrajet or Quadra-Jet. Learn More
$9.99 ea.
Camaro Intake Air Temperature Sensor Relocation Kit, 1993-2002 Part # 718460
Increases Performance Easy To Install Hardware Included The factory location for the IAT sensor allows it to be subjected to high underhood temperatures causing the incorrect signal to be sent to the car's computer. Engine timing can be retarded, causing a rich fuel condition which reduces power. This easy to install kit solves the problem, just plug it in & go. Learn More
$49.99 ea.
Camaro Intake Manifold To Carburetor Adapter Plate, Edelbrock, 1967-1969 Part # E-2732
Adapts Square Bore Carburetor To Spread Bore Manifold Open Center Adapter Style 0.093" Height Natural Steel Finish Gaskets Included Sold As A Kit Rick's Camaros offers this new intake manifold to carburetor adapter plate for your 1967, 1968, or 1969 Camaro. Manufactured by Edelbrock, these carburetor adapters  allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes. This adapter base plate allows use of a square bore carburetor on a spread bore manifold. With a natural steel finish, this part looks great and has easy installation on your F-Body, with gaskets already included. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 Camaro! Learn More
$9.99 ea.
Camaro Intake Manifold Plenum Gasket Set, 1985-1992 Part # 718071
Stock Replacement For Tuned Port Injection (TPI) Only This stock replacement intake manifold plenum gasket set is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit and function meets all GM specifications. Using stock replacement parts from Eckler's, such as this intake manifold plenum gasket set, is a sound investment in the restoration or repair of your Camaro. Learn More
$24.99 Set
Camaro Cross Ram Intake Manifold Lid & Base Section Gasket,1968-1969 Part # CRP-6
Rare original intake gasket. Volume discount does not apply. Please call for current pricing & availability. Learn More
$79.99 ea.
Camaro AIRAID® Throttle Body Spacer, 1985-1992 Part # 33-12080
Installs In 30-45 Minutes Improves Throttle Body Air Flow Installation Instructions Included Made In The USA Developed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm, PowerAid®?s unique, patented Helix Bore design spins the incoming air charge as it passes through the throttle body spacer. This spinning action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque, improved mid-range power, and overall combustion efficiency for better fuel economy. Click the E.O. number (D-609) to find out if your application is listed. If your application is not listed then your intake system is not legal for sale or use in California and some other states. Learn More
$149.99 Kit
Edelbrock 1993-1997 Camaro Performer RPM Air-Gap LT1 Intake Manifold Part # 718906
Performance Intake Manifold Excellent Throttle Repsonse Throughout RPM Range (1,500-6,500 Operating Range)  Improved Fuel Economy With Incredible Horsepower Stock Engine Block Style Exhaust Gas Recirculation Technique Included Complete Intake Section Included Natural Aluminum Finish Multi-Port Injection Style A new performer intake manifold could be just the thing you need for your 1993, 1994, 1995, 1996, or 1997 Camaro. It is a proven fact that cooler air makes more power. Edelbrock Performer RPM Air-Gap Manifolds have a raised plenum which separates the intake air from the hot engine coolant passages in the base. Rick's Camaros is proud to work with Edelbrock to bring you a revolution in your F-Body's air intake. Cooler intake air can hold more oxygen, which improves the Air/Fuel ratio. Another advantage is the ability to run slightly more ignition timing without fear of detonation. More timing means more power. The raised design also puts the intake runners at a better angle to the fuel injectors, improving fuel atomization, which in turn increases efficiency and fuel economy. These manifolds accept all factory emissions equipment, brackets, and vacuum hoses. The LT1 manifold P/N 718906 is recommended for lightly modified street/strip applications, while the LT4, P/N 718907 is more suited to cars with aggressive head and cam combinations. Trust Rick's Camaros for all of your restoration and replacement needs for your 1993, 1994, 1995, 1996, or 1997 Camaro!  Learn More

Regular Price: $499.99 ea.

Sale Price: $357.99 ea.

Camaro Cross Ram Intake Set-Up, Complete, Wide Base, 1968-1969 Part # CRP-69
Best Quality Reproduction Crossram Modern Holley 4295 Carburetors Reproduction 2-piece Intake Large, Wide Base Air Cleaner All Hardware Including Fuel Lines   Reproduction of the awesome Cross Ram heavy duty (read RACING), over the counter, GM Part is now available from Rick's Camaros. The crossram was designed by GM engineers to be a tunnel ram intake laid over on its side for hood clearance and they came up with a system for the Camaro that really boosts horsepower and low-end torque. Buy the one and only cross ram for your Camaro from Rick's Camaros today and put the horsepower to that 302 in your Z/28. NOTE: The cross ram is made to be used as part of a system including headers and a transistorized ignition system and must be tuned as a system. The cross ram has a bad reputation for making Camaros not driveable on the street and this is because it has not been tuned properly from the beginning. Do not expect to purchase a cross ram (reproduction or original) and drop it right on like any regular, aftermarket aluminum intake and 4 barrel carburetor. Learn More
$7,849.99 ea.
Camaro Cross Ram Intake Set-Up, Complete, Oval Base, 1968-1969 Part # CRP-68
Best Quality Reproduction Crossram Modern Holley 4295 Carburetors Reproduction 2-piece Intake Small, Oval Base Air Cleaner Custom Grind Camshaft & Lifter Set All Hardware Including Fuel Lines The best reproduction of the awesome Cross Ram heavy duty (read RACING), over the counter, GM Part is now available from Rick's Camaros. The crossram was designed by GM engineers to be a tunnel ram intake laid over on its side for hood clearance and they came up with a system for the Camaro that really boosts horsepower and low-end torque. Buy the one and only cross ram for your Camaro from Rick's Camaros today and put the horsepower to that 302 in your Z/28. NOTE: The cross ram is made to be used as part of a system including headers and a transistorized ignition system and must be tuned as a system. The cross ram has a bad reputation for making Camaros not driveable on the street and this is because it has not been tuned properly from the beginning. Do not expect to purchase a cross ram (reproduction or original) and drop it right on like any regular, aftermarket aluminum intake and 4 barrel carburetor. Learn More
$7,749.99 ea.
Camaro AIRAID® Throttle Body Booster, 5.7L, 1998-2002 Part # 33-12093
Installs Using Common Tools Improves Throttle Body Air Flow Installation Instructions Included Made In The USA These throttle body boosters spin the incoming air as it passes through your throttle body and over the multitude of Econoaid blades. The turbulent air charge is carried through past intake valves for better atomization and more complete combustion! The Throttle Body Booster will give you a crisper throttle response, along with better Gas Mileage. A huge benefit of these spacers is the fuel savings. The Results of this fuel saving device will always vary depending on vehicle type, driving habits, age of the vehicle, and driving environment, among other factors. However, the average vehicle will see an extra 1-3 MPG and produce an extra 6-10 Ft.lbs of Torque, which can be felt from the increased low-end throttle response. These throttle body boosters will pay for themselves in no time at all, especially with current increasing gas prices. Click the E.O. number (D-520-4) to find out if your application is listed. If your application is not listed then your intake system is not legal for sale or use in California and some other states. Learn More
$27.99 Kit
Edelbrock 1993-1997 Camaro Performer RPM Air-Gap LT4 Intake Manifold Part # 718907
Performance Intake Manifold Excellent Throttle Repsonse Throughout RPM Range Improved Fuel Economy With Incredible Horsepower Complete Intake Section Included 1,500-6,500 Operating RPM Range Natural Aluminum Finish Red Powdercoated Multi-Port Injection Stock/OEM Standard Engine Block   Rick's Camaros offers this LT4 intake manifold for your 1993, 1994, 1995, 1996, or 1997 Camaro. It is a proven fact that cooler air makes more power. Edelbrock Performer RPM Air-Gap Manifolds have a raised plenum which separates the intake air from the hot engine coolant passages in the base. Cooler intake air can hold more oxygen, which improves the Air/Fuel ratio. Another advantage is the ability to run slightly more ignition timing without fear of detonation. More timing means more power for your F-Body Camaro. The raised design also puts the intake runners at a better angle to the fuel injectors, improving fuel atomization, which in turn increases efficiency and fuel economy in your street car. These manifolds accept all factory emissions equipment, brackets, and vacuum hoses. The LT1 manifold P/N 718906 is recommended for lightly modified street/strip applications, while the LT4, P/N 718907 is more suited to cars with aggressive head and cam combinations. Trust Rick's Camaros for all of your restoration and replacement needs for your 1993, 1994, 1995, 1996, or 1997 Camaro!  Learn More

Was: $592.99 ea.

Now: $542.99 ea.
Camaro Intake Manifold, LS1, Polished, Wieland/Lingenfelter,1998-2002 Part # 718779
Up To 15hp Increase Upgrades LS1 To Z06 Air Flow High Luster Polished Finish Removable Bottom Allows Custom Porting Fabrication Of EGR Port Block-Off Required Learn More
$799.99 ea.
1998-2002 Camaro Intake Manifold, BBK SSI-Series, With 80MM Throttle Body Part # 33-10982
Provides 18-24 Horsepower Increase On Stock LS1, 12-15 On Z-28 Machined Aluminum Casting Titanium Powder Coated Finish Supplied With BBK 80mm Throttle Body P/N 38065 Made In USA Ricks Camaros is proud to offer this new BBK SSI series intake manifold delivers unmatched performance and value on your  1998, 1999, 2000, 2001, 2002 Camaro. By improving over the factory Camaro LS1 intake manifold, The BBK engineers were able to come up with a unit that delivers 12-15 additional rear wheel horsepower on Z-28 models and 18-24 horsepower on the base LS-1 equipped Camaro models. Such highlights include a standard 85mm straight through design throttle inlet and low restrictive rounded runners for maximum horsepower as well as improved low end torque for great street or strip performance. For additional Camaro power gains and value, we also offer this Camaro intake manifold with BBK 's popular Power Plus Series performance throttle bodies. For ease of installation this BBK SSI-Series manifold utilizes factory rubber O-ring gaskets and includes all required mounting hardware for installation. This new BBK intake manifold From Ricks Camaros comes in beautiful titanium powder coat finish (manifold only) to make sure you are a winner at the show and the track Learn More
$799.99 ea.
20 Item(s) Sort by: Show: per page Grid  |  List
1