Product Experts Available 1-800-359-7717

CAMARO THROTTLE BODIES FOR ALL YEARS AND MODELS

Filter Your Results

 
18 Item(s) Sort by: Show: per page Grid  |  List
Camaro Throttle Position Sensor Kit, Adjustable, 1993-1997 Part # 718809
Allows You To Tune Throttle Response & Performance Easy To Install/Easy To Tune V8 Only The TPS (throttle position sensor) is a variable resistor connected to the throttle shaft on the throttle body. When the gas pedal moves, the TPS sends a signal to the computer. The computer calculates the fuel delivery and the air being consumed based on the accelerator throttle valve angle. Our adjustable TPS lets you fine-tune your Camaro's throttle response for maximum performance by changing the voltage of the sensor. The stock TPS is preset and cannot be adjusted. Out-of-adjustment TPS's can cause erratic idle, stumbling, surging and overall poor engine performance. The TPS kit includes the sensor, replacement connector/terminals, test jumper adjustment tool and instructions. NOTE: Top photo depicts where the product is installed, bottom photo shows what is actually included with kit.   Learn More
$49.99 Kit
Camaro Throttle Body Bypass Tube, 1998-2002 Part # 718214
Adds Up To 5 Horsepower (Rear Wheel) 5 Minutes Installation This tube allows hot water to by pass the throttle body thereby yielding cooler inlet air. For every 10° drop in air temperature you realize a 1% horsepower gain. Installation of this tube requires no permanent modifications to your car. Instructions included. Learn More
$19.99 Kit
Camaro AIRAID® Throttle Body Booster, 6.2L, 2010-2014 Part # 33-12092
Installs Using Common Tools Improves Throttle Body Air Flow Installation Instructions Included Made In The USA These throttle body boosters spin the incoming air as it passes through your throttle body and over the multitude of Econoaid blades. The turbulent air charge is carried through past intake valves for better atomization and more complete combustion! The Throttle Body Booster will give you a crisper throttle response, along with better Gas Mileage. A huge benefit of these spacers is the fuel savings. The Results of this fuel saving device will always vary depending on vehicle type, driving habits, age of the vehicle, and driving environment, among other factors. However, the average vehicle will see an extra 1-3 MPG and produce an extra 6-10 Ft.lbs of Torque, which can be felt from the increased low-end throttle response. These throttle body boosters will pay for themselves in no time at all, especially with current increasing gas prices. Click the E.O. number (D-520-4) to find out if your application is listed. If your application is not listed then your intake system is not legal for sale or use in California and some other states. Learn More
$27.99 Kit
Camaro Throttle Body Bypass Tube, 1993-1997 Part # 718213
Adds Up To 5 Horsepower (Rear Wheel) 5 Minutes Installation This tube allows hot water to by pass the throttle body thereby yielding cooler inlet air. For every 10° drop in air temperature you realize a 1% horsepower gain. Installation of this tube requires no permanent modifications to your car. Instructions included. Learn More
$18.99 Kit
Camaro Throttle Body Rebuild Kit, For TBI Cars Only, 1988-1992 Part # 718915
High Idle & Poor Mileage? Here Is The Fix All Parts Meet Or Exceed Original Specifications Remember, Dont Overtorque Your Throttle Body, It's Easily Warped Not For Tuned Port Injection Contains New Base Gasket, Air Cleaner Gasket, Idle Air Control Gasket, Injector Pod Gaskets, Fuel Regualtor Diaphram & Gaskets, & Other Associated Parts Learn More

Was: $99.99 Kit

Now: $47.99 Kit
1985-1988 Camaro BBK Throttle Body, Power-Plus Series 52mm, Tuned Port 305, 350 Part # 718820
Greatly Improves Air Flow 50 States EPA Legal D-245-13 Precision 356 Aluminum Alloy Casting 780 Cfm O-Ringed Shaft Double Sealed Roller Bearing Precision Die-Stamped Linkage Assembly Stock Coupler Will Not Work On This Throttle Body   Ricks Camaros is proud to offer BBK 1985, 1986, 1987 & 1988 GM Tuned Port 305, 350 Camaro throttle bodies. BBK throttle bodies from Rciks Camaros are a sinch to install and are designed to increase airflow and improve power between 7-12 horsepower. BBK is the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance Camaro. All BBK Performance Power+Plus Series throttle bodies from Ricks Camaro are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts, make BBK throttle bodies number one in performance and quality. BBK throttle bodies from Ricks Camaro are direct replacements and include new gaskets and detailed installation instructions. Fits 1985, 1986, 1987, 1988 F-body Camaro. The 52mm offering is ideally suited for use with mildly modified engines. For radical combinations the 58mm unit is suggested. Learn More

Was: $349.99 ea.

Now: $309.99 ea.
Camaro Throttle Body To Air Intake Bellows, LS1, 1998-2002 Part # 718409
Increases Engine Horsepower Simple Installation Replaces Stock Bellows Installing this smooth bellows adds up to 6 horsepower because the factory accordian style bellows is very restrictive. It is constructed of high quality, fiberglass reinforced silicone & smooths out the incoming air for uninterrupted flow. Learn More
$99.99 ea.
Camaro Throttle Body Rebuild Kit, Crossfire TBI, 1982-1984 Part # 718729
Replacement Kit For Crossfire Throttle Body Injection Only One Kit Does Both Throttle Bodies If your car was blessed with the Crossfire TBI system (twin throttle bodies), this is the kit you need to get them back in sync. Your throttle bodies share a common manifold, so its a good idea to rebuild them both at the same time. A problem with one with cause problems with the other. This kit feature all the seals, gaskets, & two new fuel regulators, plus the other parts you will need.   Learn More
$99.99 Kit
Camaro AIRAID® Throttle Body Spacer, 1985-1992 Part # 33-12080
Installs In 30-45 Minutes Improves Throttle Body Air Flow Installation Instructions Included Made In The USA Developed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm, PowerAid?s unique, patented Helix Bore design spins the incoming air charge as it passes through the throttle body spacer. This spinning action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque, improved mid-range power, and overall combustion efficiency for better fuel economy. Click the E.O. number (D-609) to find out if your application is listed. If your application is not listed then your intake system is not legal for sale or use in California and some other states. Learn More
$149.99 Kit
1985-1988 Camaro BBK Throttle Body, Power-Plus Series 58mm, Tuned Port 305, 350 Part # 718226
Greatly Improves Air Flow 50 States EPA Legal D-245-13 Precision 356 Aluminum Alloy Casting 1000 Cfm O-Ringed Shaft Double Sealed Roller Bearing Precision Die-Stamped Linkage Assembly Stock Coupler Will Not Work On This Throttle Body   Ricks Camaros is proud to offer BBK 1985, 1986, 1987 & 1988 GM Tuned Port 305, 350 Camaro throttle bodies. BBK throttle bodies from Rciks Camaros are a sinch to install and are designed to increase airflow and improve power between 7-12 horsepower. BBK is the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance Camaro. All BBK Performance Power+Plus Series throttle bodies from Ricks Camaro are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts, make BBK throttle bodies number one in performance and quality. BBK throttle bodies from Ricks Camaro are direct replacements and include new gaskets and detailed installation instructions. Fits 1985, 1986, 1987, 1988 F-body Camaro. The 52mm offering is ideally suited for use with mildly modified engines. For radical combinations the 58mm unit is suggested. Learn More

Was: $349.99 ea.

Now: $319.99 ea.
Camaro AIRAID® Throttle Body Booster, 5.7L, 1998-2002 Part # 33-12093
Installs Using Common Tools Improves Throttle Body Air Flow Installation Instructions Included Made In The USA These throttle body boosters spin the incoming air as it passes through your throttle body and over the multitude of Econoaid blades. The turbulent air charge is carried through past intake valves for better atomization and more complete combustion! The Throttle Body Booster will give you a crisper throttle response, along with better Gas Mileage. A huge benefit of these spacers is the fuel savings. The Results of this fuel saving device will always vary depending on vehicle type, driving habits, age of the vehicle, and driving environment, among other factors. However, the average vehicle will see an extra 1-3 MPG and produce an extra 6-10 Ft.lbs of Torque, which can be felt from the increased low-end throttle response. These throttle body boosters will pay for themselves in no time at all, especially with current increasing gas prices. Click the E.O. number (D-520-4) to find out if your application is listed. If your application is not listed then your intake system is not legal for sale or use in California and some other states. Learn More
$27.99 Kit
1989-1992 Camaro BBK Throttle Body, Power-Plus Series 58mm, Tuned Port 305, 350 Part # 718233
Greatly Improves Air Flow 50 States EPA Legal D-245-13 Precision 356 Aluminum Alloy Casting 1000 Cfm O-Ringed Shaft Double Sealed Roller Bearing Precision Die-Stamped Linkage Assembly   Ricks Camaros is proud to offer BBK 1989, 1990, 1991, 1992 GM Tuned Port 305, 350 Camaro throttle bodies. BBK throttle bodies from Rciks Camaros are a sinch to install and are designed to increase airflow and improve power between 7-12 horsepower. BBK is the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance Camaro. All BBK Performance Power+Plus Series throttle bodies from Ricks Camaro are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts, make BBK throttle bodies number one in performance and quality. BBK throttle bodies from Ricks Camaro are direct replacements and include new gaskets and detailed installation instructions. Fits 1989, 1990, 1991, 1992 F-body Camaro. The 52mm offering is ideally suited for use with mildly modified engines. For radical combinations the 58mm unit is suggested. Learn More

Was: $349.99 ea.

Now: $319.99 ea.
1992-1993 Camaro BBK Throttle Body, Power-Plus Series 58mm, LT1 350 Part # 718229
Fits LT1 Only Greatly Improves Air Flow Precision 356 Aluminum Alloy Casting 50 States EPA Legal D-245-13 780 Cfm O-Ringed Shaft Double Sealed Roller Bearing Precision Die-Stamped Linkage Assembly   Ricks Camaros is proud to offer BBK 1992-1993 GM LT1 350 Camaro throttle bodies. BBK throttle bodies from Rciks Camaros are a sinch to install and are designed to increase airflow and improve power between 7-12 horsepower. BBK is the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance Camaro. All BBK Performance Power+Plus Series throttle bodies from Ricks Camaro are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts, make BBK throttle bodies number one in performance and quality. BBK throttle bodies from Ricks Camaro are direct replacements and include new gaskets and detailed installation instructions. Fits 1992-1993 LT1  F-body Camaro. The 52mm offering is ideally suited for use with mildly modified engines. For radical combinations the 58mm unit is suggested. Learn More

Was: $349.99 ea.

Now: $319.99 ea.
1998-2002 Camaro BBK Throttle Body, Power-Plus Series 80mm, LS1/LS6 Part # 718232
For LS1 Only Greatly Improves Air Flow Bolt-On 7-10 Horsepower E.O.# Pending For Street Legal Use In All 50 States   Ricks Camaros is proud to offer BBK 1998, 1999, 2000, 2001, 2002 80mm LS1 & LS6 Camaro throttle bodies. BBK throttle bodies from Rciks Camaros are a sinch to install and are designed to increase airflow and improve power between 7-12 horsepower. BBK is the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance Camaro. All BBK Performance Power+Plus Series throttle bodies from Ricks Camaro are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts, make BBK throttle bodies number one in performance and quality. BBK throttle bodies from Ricks Camaro are direct replacements and include new gaskets and detailed installation instructions. Fits 1998, 1999, 2000, 2001, 2002 F-body Camaro. Learn More

Was: $329.99 ea.

Now: $299.99 ea.
1992-1993 Camaro BBK Throttle Body, Power-Plus Series 52mm, LT1 350 Part # 718228
Fits LT1 Only Greatly Improves Air Flow Precision 356 Aluminum Alloy Casting 50 States EPA Legal D-245-13 1000 Cfm O-Ringed Shaft Double Sealed Roller Bearing Precision Die-Stamped Linkage Assembly   Ricks Camaros is proud to offer BBK 1992-1993 GM LT1 350 Camaro throttle bodies. BBK throttle bodies from Rciks Camaros are a sinch to install and are designed to increase airflow and improve power between 7-12 horsepower. BBK is the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance Camaro. All BBK Performance Power+Plus Series throttle bodies from Ricks Camaro are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts, make BBK throttle bodies number one in performance and quality. BBK throttle bodies from Ricks Camaro are direct replacements and include new gaskets and detailed installation instructions. Fits 1992-1993 LT1  F-body Camaro. The 52mm offering is ideally suited for use with mildly modified engines. For radical combinations the 58mm unit is suggested. Learn More

Was: $349.99 ea.

Now: $319.99 ea.
1994-1997 Camaro BBK Throttle Body, Power-Plus Series 58mm, LT1 350 Part # 718231
Fits LT1 Only Greatly Improves Air Flow Precision 356 Aluminum Alloy Casting 50 States EPA Legal D-245-13 1000 Cfm O-Ringed Shaft Double Sealed Roller Bearing Precision Die-Stamped Linkage Assembly   Ricks Camaros is proud to offer BBK 1994, 1995, 1996, 1997 GM LT1 350 Camaro throttle bodies. BBK throttle bodies from Rciks Camaros are a sinch to install and are designed to increase airflow and improve power between 7-12 horsepower. BBK is the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance Camaro. All BBK Performance Power+Plus Series throttle bodies from Ricks Camaro are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts, make BBK throttle bodies number one in performance and quality. BBK throttle bodies from Ricks Camaro are direct replacements and include new gaskets and detailed installation instructions. Fits 1994, 1995, 1996, 1997 LT1  F-body Camaro. The 52mm offering is ideally suited for use with mildly modified engines. For radical combinations the 58mm unit is suggested. Learn More

Was: $349.99 ea.

Now: $329.99 ea.
1989-1992 Camaro BBK Throttle Body, Power-Plus Series 52mm, Tuned Port 305, 350 Part # 718227
Greatly Improves Air Flow Precision 356 Aluminum Alloy Casting 50 States EPA Legal D-245-13 780 Cfm O-Ringed Shaft Double Sealed Roller Bearing Precision Die-Stamped Linkage Assembly Stock Coupler Will Not Work On This Throttle Body   Ricks Camaros is proud to offer BBK 1989, 1990, 1991 GM Tuned Port 305, 350 Camaro throttle bodies. BBK throttle bodies from Rciks Camaros are a sinch to install and are designed to increase airflow and improve power between 7-12 horsepower. BBK is the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance Camaro. All BBK Performance Power+Plus Series throttle bodies from Ricks Camaro are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts, make BBK throttle bodies number one in performance and quality. BBK throttle bodies from Ricks Camaro are direct replacements and include new gaskets and detailed installation instructions. Fits 1989, 1990, 1991 F-body Camaro. The 52mm offering is ideally suited for use with mildly modified engines. For radical combinations the 58mm unit is suggested. Learn More

Was: $349.99 ea.

Now: $319.99 ea.
1994-1997 Camaro BBK Throttle Body, Power-Plus Series 52mm, LT1 350 Part # 718230
Fits LT1 Only Greatly Improves Air Flow Precision 356 Aluminum Alloy Casting 50 States EPA Legal D-245-13 780 Cfm O-Ringed Shaft Double Sealed Roller Bearing Precision Die-Stamped Linkage Assembly   Ricks Camaros is proud to offer BBK 1994, 1995, 1996, 1997 GM LT1 350 Camaro throttle bodies. BBK throttle bodies from Rciks Camaros are a sinch to install and are designed to increase airflow and improve power between 7-12 horsepower. BBK is the world’s number one manufacturer of aftermarket performance throttle bodies for late model EFI performance Camaro. All BBK Performance Power+Plus Series throttle bodies from Ricks Camaro are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts, make BBK throttle bodies number one in performance and quality. BBK throttle bodies from Ricks Camaro are direct replacements and include new gaskets and detailed installation instructions. Fits 1994, 1995, 1996, 1997 LT1  F-body Camaro. The 52mm offering is ideally suited for use with mildly modified engines. For radical combinations the 58mm unit is suggested. Learn More

Was: $349.99 ea.

Now: $319.99 ea.
18 Item(s) Sort by: Show: per page Grid  |  List
1