Product Experts Available 1-800-359-7717

CAMARO DOOR HARDWARE FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (3)
  2. (2)
  3. (5)
  4. (7)
  5. (1)
PRICE RANGE
  1. (9)
  2. (14)
  3. (11)
  4. (2)
 
Items 1 to 24 of 37 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List 
Camaro Door Panel Mounting Door Frame Plug Set, 1967-1981 Part # HW-135
Reproduction Of Original Set Of 12 Door Frame Plugs Completes 2 Doors Panels Easy To Replace & Install Fits 1967-1981 Camaro Models The next time that you pop your 1967-1981 Camaro door panels off, you may notice the little plastic cups along the door side where your door panel clips went into the door. Your Camaro's door panel may be getting caught and pulling off the door at the corners because those clips are missing or broken. It's possible that you pried them off when you painted your F-Body Camaro's door and can’t find them now, but there is no point in re-using them anyway. Any professional restorer will tell you that skimping on these little plugs is a big mistake. Plastic gets old and fatigued and will eventually crumble, leaving your new or upgraded Camaro door panels exposed to easy damage. Rick’s Camaros is proud to offer these correct injection molded Camaro door panel plugs, a must for any interior restoration. This set of twelve door frame plugs is enough to complete two door panels on your Camaro. Installation is easy; simply push them into the original holes in the door shell and gently tap them in place. Trust Rick’s Camaros & Malibu for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 1st or 2nd gen Camaro! Learn More

Was: $11.99 Set

Now: $9.99 Set

Camaro Door Jamb Vent Grill, With Flapper, 1968-1969 Part # IN-23R
Restoration Correct  Officially Licensed GM Restoration Part Fully Assembled With Inner Vent Screen & Rear Retainer Plate Durable High Quality Injection Molded Black Plastic (2) Required Per Car 1968, 1969 Camaro interior is classic and timeless in appearance. The door jamb vent removes air from the passenger compartment to make the doors on your Camaro easier to close. Ricks Camaros offers this quality Door Jamb Vent Grill, With Flapper.  If this part were to get worn down and stop working properly, it could cause your door assembly to have much more difficulty in opening and closing. Finish off the door jamb area of your 1968 or 1969 Camaro with this fully assembled door jamb vent from Rick's Camaros. Other reproductions available today are just the front vent cover and nothing else. This accurate officially GM licensed reproduction assembly is injection molded  and includes the inner vent screen, front grille cover, and rear retainer plate. Coming fully assembled, you won't have to worry about a thing. Keep your Camaro factory correct with this door jamb vent assembly, and trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! Learn More

Was: $23.99 ea.

Now: $19.99 ea.

Camaro Door Panel Mounting Clip Set, 1967-1969 Part # HW-134
Reproduction Of Original Set Of 12 Clips Completes 2 Door Panels   When replacing your door panels, mounting clips are essential for attaching the panels to the body of your 1967, 1968, or 1969 Camaro. Since most door panels do not come with their own mounting clips, Rick’s Camaros is happy to offer this set of twelve door panel mounting clips, which fully covers two of your Camaro’s doors. Matching factory specifications, these mounting clips will exactly replace your previous door panel clips and enable your Camaro to look as good as new with its new panels. Remember to buy two sets if you must replace door panels on more than two doors. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 Camaro! Learn More
$8.99 Set
Camaro Inner Door Panel Center Or Rear Retainer Plate, 1970-1979 Part # 736137
Reproduction Of Original Used To Support Door Panels 2 Required Per Door This door panel retainer plate also serves as the window anti-rattle bumper. Replacing this part restores proper window alignment and insures a good seal to the roof rail weatherstrip. Learn More

Was: $18.99 ea.

Now: $17.99 ea.

Camaro Door Panel Lower Mounting Screw Set, 1967-1969 Part # HW-20
Correct Reproduction Small Head Trim Screw With Integral Washer Fits Standard Or Deluxe Door Panels Set Of Eight One Set Required Per Car Rick's offers this correct reproduction of the 1967, 1968 or 1969 Camaro door panel screws. These screws are driven through the bottom part of the door panel straight into the door shell to hold the lower door panel down. These screws are made from high quality steel to ensure durability and will perfectly replace the originals. Years ago many enthusiasts thought there were two different screws for standard or deluxe interior door panels. Not So! Get the correct ones for your 1967, 1968 or 1969 Camaro at Rick's First Generation. Learn More

Was: $3.99 Set

Now: $2.99 Set

Camaro Door Jamb Windlace, Rear, 1968-1969 Part # DJ-90
Correct Reproduction 1 Pair Per Car Black Finish Molded-In Endcap Rigid Steel Inserts Provide Easier Installation For Rear Doors Fits 1968-1969 Camaro Models 1968-1969 Camaro's door jamb windlace protects the occupants from the otherwise sharp edges of the door jamb sheet metal lip. Ricks Camaros offers this quality replacement, Door Jamb Windlace, Rear, for your restoration project or part repacement. Rear windlace also acts as a cosmetic covering of the door jamb in order to keep the inside panel looking clean and sharp.Over time, this windlace molding trim becomes worn and deteriorated, leaving the door jamb sharp edges exposed. Rick's Camaros offers this authentic reproduction of the original door jamb windlace molding available for your rear side panels. Manufactured in the original style materials and featuring the correct grain, each pair includes correct molded ends and edge corners with clips, featuring a molded-in endcap and rigid steel inserts to provide much easier installation. This pair of door jamb windlace is available in black, and can be painted or dyed to match the color of your 1968, 1969 Camaro's interior. Don't wait to keep your interior looking clean and professional! From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement part needs. Learn More
$89.99 pr.
Camaro Door Jamb Vent Grill, Without Flapper, 1968-1969 Part # IN-23
Quality Reproduction Door Jamb Vent Grille Officially Licensed GM Restoration Part Outer Grille Cover Only, Without Flapper Injection Molded Black Plastic (2) Required per Car The door jamb vent removes air from the passenger compartment to make the doors on your Camaro easier to close. If the vent grille were to get worn down and clogged up and stop working properly, it could cause your door assembly to have much more difficulty in opening and closing. Finish off the door jamb area of your 1968 or 1969 Camaro with this door jamb vent grille from Rick's Camaros. This accurate officially GM licensed reproduction part is the front grille cover only, without the flapper. Keep your Camaro factory correct with this door jamb vent screen, made from injection molded black plastic, and trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! Learn More

Was: $13.99 ea.

Now: $11.95 ea.

Camaro Door Jamb Windlace, Rear, 1967 Part # DJ-62
High Quality Reproduction Of Original One Pair Per Car Premium Rubber Has Correct Molded End Finally! New reproduction door jamb winlace more like the originals of your 1967 Camaro. The windlace does an excellent job at keeping wind from getting into the interior which can cause temperature problems and annoying sounds. This piece trims both rear side panels to body door jamb and includes correct molded end and edge corner with clip. Get nothing but the best for your 1967 Camaro and always trust Rick's Camaros for all your restoration needs! Learn More
$89.99 pr.
Camaro Door & Rear Side Panel Watershield Set, Coupe, 1968-1969 Part # DW-2
High Quality Die-Cut Perfectly Replaces Original Water Shields Used To Shield Door Panel From Water Damage This 1968 or 1969 Camaro die cut, waterproof watershield set keeps door glass water runoff from reaching your door panels. This Camaro door panel watershield set is designed to prevent water damage effects such as mildew, warping and premature rot. It includes water shields for both front door and rear side panel. This is the full set and will replace all shields. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 Camaro! Learn More

Was: $13.99 ea.

Now: $12.99 ea.

Camaro Door Panel Water Shields, Coupe, Mylar, 1968-1969 Part # DW-7
Longer Lasting Upgrade Over Original Design Mylar Offers Superior Strength, Heat Resistance, And Excellent Insulating Properties Replaces Paper Style Water Shields Will Not Shrink Or Tear Like Orignial Used To Shield Door Panel From Water Damage This 1968-1969 Camaro die cut, Mylar waterproof watershield set keeps door glass water runoff from reaching your door panels. This Camaro door panel  Mylar watershield set is designed to prevent water damage effects such as mildew, warping and premature rot. It includes water shields for both front door and rear side panel. The mylar material makes sure the watershield will last much longer than a standard paper one which could wear out quickly. Mylar is an extraordinarily strong polyester film that was developed in the early 1950s, and quickly replaced cellophane as the go to item. Replace those torn, cracked, weathered, factory watershields, with these quality replacement Mylar water shields for your prized 1968, 1969 Camaro.  Trust Rick's Camaros for all of your restoration and replacement needs. Learn More
$19.99 Set
Camaro Door Panel Handle Plate Mounting Screw Set, Deluxe Interior, 1968-1969 Part # HW-95
High Quality Reproduction Chrome Plated For That Show Quality Look Will Perfectly Replace The Originals Set Of Two Over time the screws on your handle plate will start to rust and wear leading to potential handle problems they may leave you stuck out of your 1968 or 1969 Camaro. Chrome screw set attaches both cups to door bracket. These screws are made from high quality steel to ensure durability and will perfectly replace the originals. The screws are also chrome plated to give them that show quality look on your 1968 or 1969 Camaro. Always trust Rick's Camaros for all your restoration needs at the best price! Learn More
$2.99 Set
Camaro Door Panel Handle Cup Mounting Screw Set, Deluxe Interior, 1967 Part # HW-54
High Quality Reproduction Chrome Plated For That Show Quality Look Will Perfectly Replace The Originals Set Of Four Over time the screws on your handle cups will start to rust and wear leading to potential handle problems they may leave you stuck out of your 1967 Camaro. Chrome screw set attaches both cups to door bracket. These screws are made from high quality steel to ensure durability and will perfectly replace the originals. The screws are also chrome plated to give them that show quality look on your 1967 Camaro. Always trust Rick's Camaros for all your restoration needs at the best price! Learn More
$1.99 Set
Camaro Door Panel Mounting Bracket, Front, Deluxe Interior,1967 Part # DP-93
Reproduction Mounting Brackets Accurate Die Stamped Steel Right Angle Brackets For Deluxe Interiors Mount To Inner Door Shell That Supports Deluxe Door Panel Cup Sold As A Pair Fits Both Driver's (Left) & Passenger's (Right) Side Door Panels The door panel cup mount brackets in your 1967 Camaro's interior can become damaged or even break over time. Rick's Camaros is happy to offer this pair of reproduction Deluxe door panel cup mount brackets to replace your originals. Made from accurate stamped plated steel, these right angel door mount brackets mount to the inner door shell that supports the deluxe door panel cup. Being sold in a pair, these mounting brackets will fit both the driver's side and passenger's side front interior door panels. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro with deluxe interior! Learn More
$29.99 pr.
Camaro Door & Rear Side Panel Watershield Set, Coupe, 1967 Part # DW-1
High Quality Die-Cut Perfectly Replaces Original Water Shields Used To Shield Door Panel From Water Damage This 1967 Camaro die cut, waterproof watershield set keeps door glass water runoff from reaching your door panels. This Camaro door panel watershield set is designed to prevent water damage effects such as mildew, warping and premature rot. It includes water shields for both front door and rear side panel. This is the full set and will replace all shields. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 Camaro! Learn More

Was: $13.99 ea.

Now: $12.99 ea.

Camaro Inner Door Panel Forward Retainer Plate, 1970-1978 Part # 736136
Reproduction Of Original Used To Support Door Panels Felt Padding Not Included One Required Per Door This door panel retainer plate also serves as the window anti-rattle bumper. Replacing this part restores proper window alignment and insures a good seal to the roof rail weatherstrip. Learn More
$17.99 ea.
Camaro Door Jamb Windlace End Caps, 1967 Part # DJ-61
Made From High Quality Rubber Premium Import For Rider Quality Windlace Finishes The Door Jamb Edge Perfectly Replaces Original This piece finishes top of door jamb edge welting on a 1967 Camaro. Windlace does an excellent job at keeping wind from getting into the interior which can cause temperature problems and annoying sounds. Over time however the windlace starts to degrade from exposure to the elements. Choose show quality, made in the USA, licensed part, (DJ-67) or this excellent quality imported reproduction. Comes in black as a pair, but can be painted to match your 1967 Camaro! Always trust Rick's Camaros for all your restoration needs at the best price! Learn More

Was: $29.99 pr.

Now: $24.99 pr.

Camaro Door Panel Water Shields, Coupe, Mylar, 1967 Part # DW-5
Upgrade Over Original Design Replaces Paper Style Water Shields Used To Shield Door Panel From Water Damage This 1967 Camaro die cut, waterproof watershield set keeps door glass water runoff from reaching your door panels. This Camaro door panel watershield set is designed to prevent water damage effects such as mildew, warping and premature rot. It includes water shields for both front door and rear side panel. The mylar material makes sure the watershield will last much longer than a standard paper one which could wear out quickly. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 Camaro! Learn More
$21.99 Set
Camaro Door Panel Watershield Set, Convertible, 1968-1969 Part # DW-4
Reproduction Of Original Includes Perforations For Door Handles Window Cranks Correct Die-Cut Protects The Interior Trim Panels This 1968, 1969 Camaro die cut, waterproof watershield set keeps door glass water runoff from reaching your door panels. This Camaro door panel watershield set is designed to prevent water damage effects such as mildew, warping and premature rot. It includes water shields for both front door and rear side panel. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968, 1969 Camaro! Learn More
$9.99 ea.
Camaro Vents, Door Jamb Astro, 1970-1981 Part # 33-31017
Replacement Of Original Correct Color Injection Molded Construction The door jamb vent removes air from the passenger compartment to make the doors on your 1970-1981 Camaro easier to close. If the vent grille were to get worn down and clogged up and stop working properly, it could cause your door assembly to have much more difficulty in opening and closing. These are the finest reproduction Astro Ventilation vents on the market. They are the correct color for that 100% correct restoration or just for your daily driver. Finish off the door jamb area of your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro with this door jamb vent grille from Rick's Camaros. Learn More

Was: $49.99 pr.

Now: $39.99 pr.

Camaro Door Jamb Windlace End Caps, 1967 Part # DJ-67
Made From High Quality Rubber Premium Import For Rider Quality Windlace Finishes The Door Jamb Edge Perfectly Replaces Original This piece finishes top of door jamb edge welting on a 1967 Camaro. Windlace does an excellent job at keeping wind from getting into the interior which can cause temperature problems and annoying sounds. Over time however the windlace starts to degrade from exposure to the elements. Choose show quality, made in the USA, Officially Licensed GM Restoration Parts from Trim Parts, or an excellent quality imported reproduction (DJ-61). Comes in black as a pair, but can be painted to match your 1967 Camaro! Always trust Rick's Camaros for all your restoration needs at the best price! Learn More
$51.99 pr.
Camaro Door Jamb Vents, Polished Billet, 1970-1992 Part # 731450
Billet Construction Beautiful Polished Finish Direct Bolt-On With Out Modifications Made In The USA The door jamb vent removes air from the passenger compartment to make the doors on your 1970-1992 Camaro easier to close. If the vent grille were to get worn down and clogged up and stop working properly, it could cause your door assembly to have much more difficulty in opening and closing. Finish off the door jamb area of your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 Camaro with this door jamb vent grille from Rick's Camaros.   Learn More
$134.99 pr.
Camaro Door Jamb Vents, Polished Billet, 1967-1969 Part # IN-250
Billet Construction Beautiful Polished Finish Direct Bolt-On With Out Modifications The door jamb vent removes air from the passenger compartment to make the doors on your Camaro easier to close. If the vent grille were to get worn down and clogged up and stop working properly, it could cause your door assembly to have much more difficulty in opening and closing. Finish off the door jamb area of your 1967, 1968 or 1969 Camaro with these door jamb vents from Rick's Camaros. These accurate vents features a beautiful polished finish to give it that show quality look. Keep your Camaro looking great with this door jamb vent made from billet construction, and trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968 or 1969 1st gen Camaro! Learn More

Was: $139.99 pr.

Now: $129.99 pr.

HushMat Ultra Insulation, Door, Firewall Or Roof, For Camaro, 1967-1969 Part # 33-11015
Reduces Heat By 40% And Interior Noise By 50% (10) 12"X12" Sheets For 10 Square Feet Of Coverage (.93 Square Meters) #1 Rated Thermal & Sound Deadening Insulation Peel & Stick Sheets Are Easily Cut With Scissors Each Sheet Is 1/8" (1.5MM) Thick And Light Weight At 1/2 Pound Per Square Foot Choose Black Or Silver Cool, Quiet & Comfortable! HushMat® specializes in reducing unwanted noise in your 1967, 1968 or 1969 Camaro by eliminating structural vibration, reducing heat, road noise, engine noise, wind noise, engine exhaust, and radiant heat. You experience the quality sound and comfort of your automobile with HushMat® Ultra thermal & sound deadener insulation. Rick's Camaros provides you with only the best parts for your Camaro always at the best possible price. NOTE: Kit Does 2 Inner Doors or 1 Firewall or 1 Roof. If you need to do your doors, firewall & roof, you will need to order 3 kits. Learn More
$99.99 Kit
Camaro Door Panel Watershield Set, Convertible, 1967 Part # DW-3
High Quality Die-Cut Perfectly Replaces Original Water Shields Used To Shield Door Panel From Water Damage This 1967 Camaro die cut, waterproof watershield set keeps door glass water runoff from reaching your door panels. This Camaro door panel watershield set is designed to prevent water damage effects such as mildew, warping and premature rot. It includes water shields for both front door and rear side panel. This is the full set and will replace all shields. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 Camaro! Learn More
$9.99 ea.
Items 1 to 24 of 37 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List 
4