Product Experts Available 1-800-359-7717

CAMARO DOOR RODS AND CLIPS FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (12)
PRICE RANGE
  1. (8)
  2. (7)
 
15 Item(s) Show per page Grid  List 
Camaro Door Lock Rod Bellcrank Retainer, Inner, 1969-1981 Part # WR-47
Reproduction Inner Bellcrank Retainer Retains Door Lock Bellcrank Sold Individually 2 Required Per Door Fits Driver's Or Passenger's Side Door Replaces GM #8733856 1969 Camaro inner door lock rod and bellcrank is essential for correct operation of your door locks. The door lock rod bellcrank retainer is crucial as well. This is the correct plastic sleeve that holds the door pull lock rod to the inside door frame and allows the door lock rod shaft to swivel on the body of your door frame.  Rick's Camaros offers this inner bellcrank retainer, fitting either the driver's or passenger's side doors. Two of these are required per door to mount the bellcrank to the door frame. Since they are sold individually, be sure to get two to complete your door's assembly! Complete your door lock rod bellcrank assembly today for your 1969 Camaro! Do not settle for just any replacement part, use only the best for your prized ride. Trust Ricks Camaros for all your part needs. Learn More
$4.99 ea.
Camaro Lower Door Panel Clip, 1975-1981 Part # 33-10480
Reproduction Of Original Plastic Christmas Tree Style Clip 3/4" Stem Length 5/16" Stem Diameter 12 Required Eckler's Camaro has you covered for your door panel replacement needs. These high-quality, white molded clips are made to strict factory specification with correct wide thread head and Christmas tree style shaft. Easy to install with no tools needed. You will find the low cost of these clips an easy choice to make when doing any kind of door panel work. Don't risk using those old damaged original clips on your expensive new door panels. You can trust Rick's Camaros for all of your restoration and replacement needs for your 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Chevy Camaro!  Learn More
$1.99 ea.
Camaro Rod, Door Outer Handle, With Clip, 1970-1981 Part # 33-10118
Reproduction Of Original Includes Clip Fits Driver's Or Passenger's Side Door Replaces GM #9816544 The door handle rod is what is necessary to connect the outer door handle to the door opening mechanism in your 1970-1981 second gen Camaro. Essentially, this rod is needed to allow the door handle to actually open the door. Rick's Camaros offers this outer door handle rod for either your driver's or passenger's side door on your F-Body. This also includes a clip for easy mounting. Don't wait to get this plated reproduction to get your outer door handles working properly again. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 2nd gen Camaro! Learn More

Was: $6.99 ea.

Now: $5.99 ea.

Camaro Door Opening Mechanism Rod Assembly, Left Or Right, 1968-1969 Part # WR-79
Reproduction Rod Assemblies Includes Door Opening Rod, Anti-Rattle Sleeve, Center Guide Bracket & End Clip Completes Door Opening Assembly Sold Individually Fits Driver's (Left) Side Or Passenger's (Right) Side Doors Every time you open or close the doors on your 1968 or 1969 Camaro, you'd be surprised at how many components are working together to make that happen properly. The mechanism rod assemblies on your F-Body make up part of the door opening assembly, and if they are ever at the point of not aligning properly, your doors will suffer. Rick's Camaros offers this complete door opening mechanism rod assembly for either your driver's side or passenger's side doors. Including a plated door opening rod, anti-rattle sleeve, center guide, and end clip, you'll have everything you need to complete the assembly, for either door! This assembly will complete one door, so get two if you wish to complete both sides. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! Learn More
$19.99 ea.
Camaro Door Opening Rod Retaining Clips, 1967-1969 Part # WR-76
Reproduction Rod End Clips Attaches Door Opening Rod End To Door Opening Mechanism Spring Steel Sold As A Pair Completes Both Driver's (Left) Side & Passenger's (Right) Side Doors Every time you open or close the doors on your 1967, 1968, or 1969 Camaro, you'd be surprised at how many components are working together to make that happen properly. The door opening rod end clips make up part of the opening mechanism assembly in your F-Body, and if they are ever get to the point of rusting out or coming off, your door's assembly will suffer. Rick's Camaros offers this pair of door opening rod end clips, made of spring steel, which will attach the door opening rod end to the door opening mechanism. This pair will complete both the driver's side and passenger's side doors on your Camaro. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$6.99 pr.
Camaro Door Lock Rod & Bellcrank, Inner, Left Or Right, 1969 Part # WR-46
Reproduction Inner Door Lock Rod & Bellcrank Threaded End Is For Inner Lock Knob Rod Inner End Attaches To Door Latch Mechanism Actuator Arm Comes With Attached Bellcrank 2 Door Lock Rod Retainers Are Required (WR-47) To Mount 1 Bellcrank To Door Frame Comes With 1 Lock Rod & 1 Bellcrank Fits Either Driver's (Left) Or Passenger's (Right) Side Door Every time you lock or unlock the doors on your 1969 Camaro, you'd be surprised at how many components are working together to make that function properly. The inner door look rod makes up part of the latch mechanism assembly in your F-Body, and if it ever gets to the point of rusting, getting loose, or breaking, your door's lock assembly may not work. Rick's Camaros offers this inner door lock rod and attached bellcrank for either the driver's side or passenger's side door of your F-Body. This plated rod has a threaded end for the inner lock knob, and the rod inner end will attach to the door latch mechanism actuator arm. This door lock rod and bellcrank requires two bellcrank retainers to mount the bellcrank to the door frame (refer to Part Number above to find retainer). These door lock rods are sold individually, and one is needed per door. Trust Rick's Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro! Learn More

Was: $13.99 ea.

Now: $11.99 ea.

Camaro Door Lock Rod, Inner, Left Or Right, 1968 Part # WR-78
Reproduction Inner Door Lock Rod Threaded End Is For Inner Lock Knob Rod Inner End Attaches To Door Latch Mechanism Actuator Arm Use Door Lock Rod Retaining Clip (ID-13) For Attachment Sold Individually Fits Either Driver's (Left) Or Passenger's (Right) Side Door Every time you lock or unlock the doors on your 1968 Camaro, you'd be surprised at how many components are working together to make that function properly. The inner door look rod makes up part of the latch mechanism assembly in your F-Body, and if it ever gets to the point of rusting, getting loose, or breaking, your door's lock assembly may not work. Rick's Camaros offers this inner door lock rod for either the driver's side or passenger's side door of your F-Body. This plated rod has a threaded end for the inner lock knob, and the rod inner end will attach to the door latch mechanism actuator arm. These door lock rods are sold individually, and one is needed per door. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 1st gen Camaro! Learn More

Was: $10.99 ea.

Now: $9.99 ea.

Camaro Door Lock Rod, Inner, Left Or Right, 1967 Part # WR-77
Reproduction Inner Door Lock Rod Threaded End Is For Inner Lock Knob Rod Inner End Attaches To Door Latch Mechanism Actuator Arm Use Door Lock Rod Retaining Clip (ID-13) For Attachment Sold Individually Fits Either Driver's (Left) Or Passenger's (Right) Side Door Every time you lock or unlock the doors on your 1967 Camaro, you'd be surprised at how many components are working together to make that function properly. The inner door look rod makes up part of the latch mechanism assembly in your F-Body, and if it ever gets to the point of rusting, getting loose, or breaking, your door's lock assembly may not work. Rick's Camaros offers this inner door lock rod for either the driver's side or passenger's side door of your F-Body. This plated rod has a threaded end for the inner lock knob, and the rod inner end will attach to the door latch mechanism actuator arm. These door lock rods are sold individually, and one is needed per door. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro! Learn More

Was: $10.99 ea.

Now: $9.99 ea.

Camaro Door Opening Rod Center Support, Left Or Right, 1967-1969 Part # WR-74
Reproduction Rod End Clips Mounts To Door Frame Shell To Keep Door Rod From Bending During Use Spring Steel Sold As A Pair Completes Both Driver's (Left) Side & Passenger's (Right) Side Doors Every time you open or close the doors on your 1967, 1968, or 1969 Camaro, you'd be surprised at how many components are working together to make that happen properly. The door opening rod center guide bracket make up part of the opening mechanism assembly in your F-Body, and if it ever gets to the point of rusting out or coming off, your door's assembly will suffer. Rick's Camaros offers this accurate reproduction center guide bracket, which mounts to the door frame shell. This bracket is sold individually, as one is required per door, and has a finish like the original. This new center support for rod assembly will keep the rod from bending during use. This door opening rod center support bracket will fit either the driver's side or passenger's side door. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$9.99 ea.
Camaro Door Opening Mechanism Rod Assemblies, Left & Right,1967 Part # WR-89
Reproduction Rod Assemblies Includes Door Opening Rod, Anti-Rattle Sleeve, Center Guide Bracket & End Clip Completes Door Opening Assembly Comes As A Pair Fits Driver's (Left) Side & Passenger's (Right) Side Doors Every time you open or close the doors on your 1967 Camaro, you'd be surprised at how many components are working together to make that happen properly. The mechanism rod assemblies on your F-Body make up part of the door opening assembly, and if they are ever at the point of not aligning properly, your doors will suffer. Rick's Camaros offers this complete door opening mechanism rod assembly for both your driver's side and passenger's side doors. Including a plated door opening rod, anti-rattle sleeve, center guide, and end clip, you'll have everything you need to complete the assembly, for two doors! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro! Learn More

Was: $34.99 pr.

Now: $29.99 pr.

Camaro Rod Assembly, Door Opening, Left & Right, 1970-1981 Part # 33-31018
Reproduction Of Original Complete Assembly Plated Door Rods Anti-Rattle Sleeve End Clip Included Replaces GM #8800995 (Left) & 8800994 (Right) The rod assemblies for your 1970-1981 Camaro's doors are extremely important in allowing your doors to open, close, and function properly. Rick's Camaros is happy to offer this complete door opening rod assembly for both the driver's side and passenger's side doors of your F-Body. These opening rods are plated, with anti-rattle sleeves to prevent unwated noise while driving, and mounting end clips for a simple installation. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 2nd gen Camaro! Learn More
$29.99 pr.
Camaro Door Opening Mechanism Rod Assembly, Left, 1967 Part # WR-88
Reproduction Rod Assemblies Includes Door Opening Rod, Anti-Rattle Sleeve, Center Guide Bracket & End Clip Completes Door Opening Assembly Assembly Sold Individually  Fits Driver's (Left) Side Door Every time you open or close the doors on your 1967 Camaro, you'd be surprised at how many components are working together to make that happen properly. The mechanism rod assemblies on your F-Body make up part of the door opening assembly, and if they are ever at the point of not aligning properly, your doors will suffer. Rick's Camaros offers this complete door opening mechanism rod assembly for your driver's side door. Including a plated door opening rod, anti-rattle sleeve, center guide, and end clip, you'll have everything you need to complete your door's opening assembly! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro! Learn More
$19.99 ea.
Camaro Rod Assembly, Door Opening, Left, 1970-1981 Part # 33-31019
Reproduction Of Original Plated Door Rod Complete Assembly For Driver's Side Door Anit Rattle Sleeve End Clip Included Replaces GM #8800995 The rod assemblies for your 1970-1981 Camaro's doors are extremely important in allowing your doors to open, close, and function properly. Rick's Camaros is happy to offer this complete door opening rod assembly for the driver's side door of your F-Body. These opening rods are plated, with anti-rattle sleeves to prevent unwated noise while driving, and mounting end clips for a simple installation. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 2nd gen Camaro! Learn More
$17.99 pr.
Camaro Door Opening Mechanism Rod Assembly, Right, 1967 Part # WR-87
Reproduction Rod Assemblies Includes Door Opening Rod, Anti-Rattle Sleeve, Center Guide Bracket & End Clip Completes Door Opening Assembly Assembly Sold Individually  Fits Passenger's (Right) Side Door Every time you open or close the doors on your 1967 Camaro, you'd be surprised at how many components are working together to make that happen properly. The mechanism rod assemblies on your F-Body make up part of the door opening assembly, and if they are ever at the point of not aligning properly, your doors will suffer. Rick's Camaros offers this complete door opening mechanism rod assembly for your passenger's side door. Including a plated door opening rod, anti-rattle sleeve, center guide, and end clip, you'll have everything you need to complete your door's opening assembly! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro! Learn More
$19.99 ea.
Camaro Rod Assembly, Door Opening, Right, 1970-1981 Part # 33-31020
Reproduction Of Original Completes Passenger's Side Door Plated Door Rod Anit Rattle Sleeve End Clip Included Replaces GM #8800994 The rod assemblies for your 1970-1981 Camaro's doors are extremely important in allowing your doors to open, close, and function properly. Rick's Camaros is happy to offer this complete door opening rod assembly for the passenger's side door of your F-Body. These opening rods are plated, with anti-rattle sleeves to prevent unwated noise while driving, and mounting end clips for a simple installation. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 2nd gen Camaro! Learn More
$17.99 pr.
15 Item(s) Show per page Grid  List 
4