Skip to Main Content »

1-800-359-7717

Camaro Door Window Hardware

0  Items Total: $0.00 View Cart Checkout

Filter Your Results

Facebook and Twitter

Follow Rick's Camaros Facebook  Follow Eckler's on Twitter  FollowRick's on Facebook and Twitter

 

You're currently on:

CAMARO DOOR WINDOW HARDWARE FOR 'ALL YEARS AND MODELS'

Items 1 to 28 of 42 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by
Best Sellers
Camaro Window Crank Handle Retaining Clip, Door Or Quarter, 1967-1992 Part # HW-9
Restoration Correct   Spring Steel Retains Window Crank Handles & Standard Inner Door Handles Replacement For Part#: 702255   The window cranks on your 1967-1992 Camaro are used to enable movement of your windows, but what would you do if your cranks did not work? Your Camaro also requires a crank handle retaining clip, which is used to retain window crank handles and standard inner door handles. Whether this breaks or gets misaligned, it will keep your Camaro’s window cranks from working properly. Rick’s Camaros is happy to offer new reproduction window crank handle retaining clips, matching factory specifications and replacing your original retaining clips. Made with spring steel, these retaining clips are sure to keep your window crank handles secure and in working condition for your Camaro. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro.   Learn More
$0.99 ea.

Add to Wishlist

Camaro Window Crank Handle Washer Plate Set, Door Or Quarter, 1967-1981 Part # IN-50
Reproduction of Original Light Gray in Color Protect Front And Rear Door Panels From Damage (4) Beveled Washers Per Set   Your crank handle washers are installed behind the window cranks in millions of vehicles, including your 1967-1981 Camaro. Oftentimes, these washers are left off of restoration projects because they usually go unnoticed behind the window crank or they have deteriorated from age. You will need them for your Camaro restoration because they serve an important purpose. These window crank washer plates protect your door panels and rear side panels from being cut by the metal back of the window crank. Rick’s Camaros is happy to offer these reproduction window crank handle washer plates to replace your original washers and protect your door panels from any possible damage. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro! Learn More
$6.99 Set

Add to Wishlist

Camaro Window Crank Handle, With Black Knob, Door Or Quarter, 1967-1981 Part # IN-48R
Best Quality Reproduction Camaro Window Crank Handle Hard Chrome Over Diecast With Black Knob  Reproduction Of Original GM Replacement Window Crank Handle Correct Length Internal Splines For Tight Engagement With All Reproduction & Original GM Window Regulators Retaining Clip Included Sold Each Your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Chevy Camaro window handle goes through a lot. This little window crank multiples the up and down forces in order to raise or lower your window. Over time, fatigue and stress slowly wear at your F-Body Camaro window handle causing it to fail. Sometimes the mounting slot becomes oblong and stripped, or your knob breaks free. Other times, your Camaro window handle simply snaps in half. Ricks Camaro knows the importance of a properly made 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro window handle and is proud to offer the very best. Simply more them a good looking chrome plated window handle, these new reproductions are made with modern materials and manufacturing techniques to will withstand the rigors job of raising and lowering your Camaro window for years to come. Die cast like the factory units, these window cranks are then chrome plated and stylish knob is added to give that authentic look back to your interior. Ricks Camaro knows that rechroming that old originals takes away a lot of fine detail, and rechroming can’t fix hidden stress cracks. Truly a high quality 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Chevy Camaro window handle at an unbeatable price, Ricks Camaro will help to get your Camaros restoration done right.   NOTE: Some window regulators on the market today have splines which are a little too long for the handle clip to engage. This can be remedied by shaving down the shoulder in the window crank with a dremel tool.   Learn More
$7.99 ea.

Add to Wishlist

Camaro Window Crank Handle, With Clear Knob, Door Or Quarter, 1967-1981 Part # IN-49R
Best Quality Reproduction Camaro Window Crank Handle Hard Chrome Over Diecast With Crystal Clear Knob (Not Incorrect Hazy Yellow)  Reproduction Of Original GM Replacement Window Crank Handle Correct Length Internal Splines For Tight Engagement With All Reproduction & Original GM Window Regulators Retaining Clip Included Sold Each   Your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Chevy Camaro window handle goes through a lot. Over time, fatigue and stress slowly wear at your F-Body Camaro window handle, causing it to fail. Sometimes the mounting slot becomes oblong and stripped, or your knob breaks free. Other times, your Camaro window handle simply snaps in half. Rick's Camaros knows the importance of a properly made 1967-1981 Camaro window handle and is proud to offer the very best. More than a simply good looking chrome plated window handle, these new reproductions are made with modern materials and manufacturing techniques to withstand excessive window use for years to come. Die cast like the factory units, these window cranks are then chrome plated and a stylish knob is added to give that authentic look to your interior. Rick's Camaros knows that rechroming that old original takes away a lot of fine detail, and rechroming cannot fix hidden stress cracks. Truly a high quality 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Chevy Camaro window handle at an unbeatable price, Rick's Camarso will help to provide all of your Camaro restoration and replacement needs.   NOTE: Some window regulators on the market today have splines which are a little too long for the handle clip to engage. This can be remedied by shaving down the shoulder in the window crank with a dremel tool.   Learn More
$7.99 ea.

Add to Wishlist

Camaro Door Panel Window Crank Spring, 1967-1969 Part # HW-8
Replacement Door Panel Spring Give Tension To The Window Crank Mounts Between Door Panel And Window Regulator Fits 1967-1969 1st Gen Camaros This 1967, 1968, 1969 first generation Camaro door panel window crank spring helps your door panel push out to lay right with the window crank. Manufactured to meet or exceed factory specifications and performance, this Camaro door panel window crank is guaranteed to keep your F-Body's door handle crank from rattling or causing unwanted noise while on the road. This new spring will give tension to the window crank, and will mount between your Camaro's door panel and the window regulator. Replace your missing, used, or worn-out part with this Camaro replacement door panel spring from Ricks today!  Trust Rick's Camaros for all of your replacement and restoration needs for your 1967, 1968, 1969 1st gen Camaro! Learn More
$1.99 ea.

Add to Wishlist

Camaro Door Panel Retainer & Window Guide, Front, 1968-1969 Part # IN-105
Reproduction Of Original Mounts On Top Front Of Door for Door Glass Alignment Helps Guide Door Glass In Tracks Fits Left or Right Doors Rear Retainer IN-106   The door panel retainer and window guide is used to support the inner door panel and guide the window on your 1968 or 1969 Camaro while it rolls up and down. Over time, this piece can become rusted and worn, and possibly fall out of alignment with your door panel and window glass. If this happens, it is time to get a replacement. Rick’s Camaros is happy to offer this reproduction front door panel retainer and window guide, which matches factory specifications of your original, while fitting either the left or right door of your F-Body Camaro. This part includes correct felt padding, designed to keep the window from being scratched. Installation is simple, as the retainer mounts on top of the front door for glass alignment. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1968 or 1969 Camaro! Learn More
$17.99 ea.

Add to Wishlist

Camaro Door Panel Retainer & Window Guide, Rear, 1968-1969 Part # IN-106
Reproduction Of Original Mounts On Top Rear Of Door For Door Glass Alignment Helps Guide Door Glass In Tracks Fits Left (Driver's) Or Right (Passenger's) Side Doors Front Retainer IN-105 Fits 1968-1969 1st Gen Camaros The door panel retainer and window guide is used to support the inner door panel and guide the window on your 1968 or 1969 first generation Camaro while it rolls up and down. Over time, this piece can become rusted and worn, and possibly fall out of alignment with your door panel and window glass. If this happens, it is time to get a replacement. Rick’s Camaros is happy to offer this reproduction rear door panel retainer and window guide, which matches factory specifications of your original, while fitting either the left or right door of your F-Body Camaro. This part includes correct felt padding, designed to keep the window from being scratched. Installation is simple, as the retainer mounts on top of the rear door for glass alignment. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! Learn More
$17.99 ea.

Add to Wishlist

Camaro Window Crank Handle, With Black Knob, Show Quality, 1968-1969 Part # IN-180
Best Quality Reproduction Window Crank Handle Correct For All 1968 & 1969 Camaro Front Door Windows Correct For All 1968 Camaro Rear Quarter Windows  Technically Correct Profile & Knob Correct Spline Depth Retaining Clip Included Your 1968, 1969 Chevy Camaro window handle goes through a lot. This little window crank multiples the up and down forces in order to raise or lower your window. Over time, fatigue and stress slowly wear at your F-Body Camaro window handle causing it to fail. Sometimes the mounting slot becomes oblong and stripped, or your knob breaks free. Other times, your Camaro window handle simply snaps in half. Ricks Camaro knows the importance of a properly made 1968, 1969 Camaro window handle and is proud to offer the very best. Simply more them a good looking chrome plated window handle, these new reproductions are made with modern materials and manufacturing techniques to will withstand the rigors job of raising and lowering your Camaro window for years to come. Die cast like the factory units, these window cranks are then chrome plated and stylish knob is added to give that authentic look back to your interior. Ricks Camaro knows that rechroming that old originals takes away a lot of fine detail, and rechroming can’t fix hidden stress cracks. Truly a high quality 1968, 1969 Chevy Camaro window handle at an unbeatable price, Ricks Camaro will help to get your Camaros restoration done right. Learn More
$14.99 ea.

Add to Wishlist

Camaro Window Crank Handle, With Black Knob, Door, 1967 Part # IN-118
Best Quality Reproduction Window Crank Handle 1967 Camaro Exclusive Handle Which Is Shorter & Has A Flatter Curve Than Later Years Correct Thin Style Black Plastic Knob Hard Triple Chrome Over Diecast As Original Includes Retaining Clip   Your 1967 Chevy Camaro window handle goes through a lot. This little window crank multiples the up and down forces in order to raise or lower your window. Over time, fatigue and stress slowly wear at your F-Body Camaro window handle causing it to fail. Sometimes the mounting slot becomes oblong and stripped, or your knob breaks free. Other times, your Camaro window handle simply snaps in half. Ricks Camaro knows the importance of a properly made 1967 Camaro window handle and is proud to offer the very best. Simply more them a good looking chrome plated window handle, these new reproductions are made with modern materials and manufacturing techniques to will withstand the rigors job of raising and lowering your Camaro window for years to come. Die cast like the factory units, these window cranks are then chrome plated and stylish knob is added to give that authentic look back to your interior. Ricks Camaro knows that rechroming that old originals takes away a lot of fine detail, and rechroming can’t fix hidden stress cracks. Truly a high quality 1967 Chevy Camaro window handle at an unbeatable price, Ricks Camaro will help to get your Camaros restoration done right. Learn More
$12.99 ea.

Add to Wishlist

Camaro Vent Window Channel Screws, 1967 Part # WR-75
Correct screws for the top section of 67 doors. Correct long length stainless steel screw with large chrome Phillips head. Pair only. Learn More
$4.99 pr.

Add to Wishlist

Camaro Door Glass Mounting Plate Gasket Set, 1968-1969 Part # WR-82
Reproduction Door Glass Mounting Plate Gasket Set Die-Cut Gaskets Sold As A Pair For Front & Rear Door Glass Mounting Plates (Completes 1 Door Glass) Fits Driver's (Left) Or Passenger's (Right) Side Whether your door glass is cracked, stained, or smudged, you'll need to eventually replace it to stay safe in your 1968 or 1969 Camaro. When replacing your window glass, it is best to get new mounting tools to ensure you have a safe and successful assembly. Rick's Camaros offers this new door window plate gasket set for your F-Body. This reproduction set includes die cut gaskets for the front and rear plates of one door glass on your Camaro. This set will fit either the driver's side or passenger's side door window glass. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! Learn More

Was: $10.99 Set

Now: $9.99 Set

Add to Wishlist

Camaro Window Crank Handle, With Clear Knob, Show Quality, 1968-1969 Part # IN-181
Best Quality Reproduction Camaro Window Crank Handle Correct For All 1968 & 1969 Camaro Front Door Windows Correct For All 1968 Camaro Rear Quarter Windows Technically Correct Profile & Crystal Clear Knob (Not Incorrect Hazy Yellow)  Correct Spline Depth Retaining Clip Included   Your 1968, 1969 Chevy Camaro window handle goes through a lot. This little window crank multiples the up and down forces in order to raise or lower your window. Over time, fatigue and stress slowly wear at your F-Body Camaro window handle causing it to fail. Sometimes the mounting slot becomes oblong and stripped, or your knob breaks free. Other times, your Camaro window handle simply snaps in half. Ricks Camaro knows the importance of a properly made 1968, 1969 Camaro window handle and is proud to offer the very best. Simply more them a good looking chrome plated window handle, these new reproductions are made with modern materials and manufacturing techniques to will withstand the rigors job of raising and lowering your Camaro window for years to come. Die cast like the factory units, these window cranks are then chrome plated and stylish knob is added to give that authentic look back to your interior. Ricks Camaro knows that rechroming that old originals takes away a lot of fine detail, and rechroming can’t fix hidden stress cracks. Truly a high quality 1968, 1969 Chevy Camaro window handle at an unbeatable price, Ricks Camaro will help to get your Camaros restoration done right. Learn More
$14.99 ea.

Add to Wishlist

Camaro Door Window Operating Mechanism Mounting Bolt Kit, 1967 Part # WR-68
Mounting hardware to mount regulators and window tracks to door. Learn More
$15.99 ea.

Add to Wishlist

Camaro Door Glass Plate Mounting Stud Assembly, 1968-1969 Part # WR-83
Reproduction Of Original 3 Required Per Door Glass Use 2 For Front Door Glass Plate & 1 For The Rear Fits Driver's Or Pasenger's Side Door Glass Whether your door glass is cracked, stained, or smudged, you'll need to eventually replace it to stay safe in your 1968 or 1969 Camaro. When replacing your window glass, it is best to get new mounting tools to ensure you have a safe and successful assembly. Rick's Camaros offers this new door glass plate mount stud assembly for your F-Body. This accurate reproduction mount stud assembly comes individually, but three are required per door glass, with two for the front plate and one for the rear plate. This stud assembly will fit either the driver's side or passenger's side door glass. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! Learn More
$11.99 ea.

Add to Wishlist

Camaro Window Crank Handle Knob, Black, Door Or Quarter, For Original GM Handles, 1967-1969 Part # IN-102
Replacement Window Crank Knob Factory Style Knob On Fits Original GM Handles   This Camaro replacement window crank knob has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this window crank knob among other possible parts as the best choice for your repair or restoration project.   Learn More
$4.99 ea.

Add to Wishlist

Camaro Door Glass Mounting Plate & Roller Set, Left, 1968-1969 Part # WR-80
Accurate Reproduction Door Window Plate & Roller Set Set Includes Front & Rear Door Glass Mounting Plates With Roller Assemblies & Front Rubber Bumper Stops Galvanized Finish (Finish Not Shown In Photos) Fits Driver's (Left) Side Whether your door glass is cracked, stained, or smudged, you'll need to eventually replace it to stay safe in your 1968 or 1969 Camaro. When replacing your window glass, it is best to get new mounting tools to ensure you have a safe and successful assembly. Rick's Camaros offers this new door window plate and roller set for your F-Body. This accurate reproduction set includes front and rear door glass mounting plates with roller assemblies, and front rubber stops. This set is galvanized just like the originals, and will fit the driver's side door window glass. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! Learn More
$54.99 Set

Add to Wishlist

Camaro Front & Rear Window Crank Handles, Black, 1969 Part # IN-248
Reproduction Of Original Correct Front & Rear Technically Correct Bends & Knob Correct Spline Depth Retaining Clip Included   Your Chevy Camaro window handle goes through a lot. This little window crank multiples the up and down forces in order to raise or lower your window. Over time, fatigue and stress slowly wear at your Camaro window handle causing it to fail. Sometimes the mounting slot becomes oblong and stripped, or your knob breaks free. Other times, your Camaro window handle simply snaps in half. Ricks Camaro knows the importance of a properly made window handle and is proud to offer the very best. Simply more them a good looking chrome plated window handle, these new reproductions are made with modern materials and manufacturing techniques to will withstand the rigors job of raising and lowering your Camaro window for years to come. Die cast like the factory units, these window cranks are then chrome plated and stylish knob is added to give that authentic look back to your interior. Ricks Camaro knows that rechroming that old originals takes away a lot of fine detail, and rechroming can’t fix hidden stress cracks. Truly a high quality Chevy Camaro window handle at an unbeatable price, Ricks Camaro will help to get your Camaros restoration done right. Learn More
$52.99 Set

Add to Wishlist

Camaro Door Glass Mounting Plate & Hardware Set, Complete, 1968-1969 Part # WR-86
Reproduction Glass Mounting & Hardware Kit 68-Piece Set Everything Included To Mount Driver's (Left) & Passenger's (Right) Side Door Glass Kit Includes (1) Right Side Door Glass Front & Rear Mount Plate Set, (1) Left Side Door Glass Front & Rear Mount Plate Set, (2) Door Glass Plate Gasket Sets, (6) Front & Rear Glass Plate Mount Stud Assemblies, (2) Rear Glass Plate Mount & Nut, (2) Forward Door Glass Stop Bumper Assemblies, (4) Door Window Sash Mount Stud Assemblies, & (4) Window Sash Retaining Nuts Whether your door glass is cracked, stained, or smudged, you'll need to eventually replace it to stay safe in your 1968 or 1969 Camaro. When replacing your window glass, it is best to get new mounting tools to ensure you have a safe and successful assembly. Rick's Camaros offers this new and complete door glass mounting plate and hwardware kit, which includes everything you need to mount the driver's side and passenger's side door glass. This 68 piece set includes the front and rear mount plate set for both the right and left side glass, two door glass plate gasket sets, six front and rear glass plate mount stud assemblies, two rear glass plate mounts and nuts, two forward door glass stop bumper assemblies, four door window sash mount study assemblies, and four window sash retaining nuts. We can assure you that this is everything that you'll need for your glass mounting project. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! Learn More
$211.99 Set

Add to Wishlist

Camaro Door Glass Stop Bumper Assembly, Front, 1968-1969 Part # WR-85
Reproduction Stop Bumper Assembly Coated Bumper Stud With Nuts 1 Required Per Door Glass For Front Door Glass Whether your door glass is cracked, stained, or smudged, you'll need to eventually replace it to stay safe in your 1968 or 1969 Camaro. When replacing your window glass, it is best to get new mounting tools to ensure you have a safe and successful assembly. Rick's Camaros offers this new forward door glass stop mount and nut for your F-Body. This reproduction front stop bumper assembly has the coated bumper stud with nuts. One of these sets is required per door glass. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! Learn More

Was: $12.99 ea.

Now: $11.99 ea.

Add to Wishlist

Camaro Door Glass Sash Channel Mounting Stud Assembly, 1968-1969 Part # WR-33
Reproduction Sash Channel Mounting Stud Assembly Two Required Per Door Glass Includes Stud Bolt, Nylon Bushing, Backing Washers, & Special Steel Washer Nut Use To Mount Lower Window Glass Sash Chennel To Door Glass Whether your door glass is cracked, stained, or smudged, you'll need to eventually replace it to stay safe in your 1968 or 1969 Camaro. When replacing your window glass, it is best to get new mounting tools to ensure you have a safe and successful assembly. Rick's Camaros offers this new door glass sash channel mounting stud assembly for your F-Body. This stud assembly includes the stud bolt, nylon bushing and backing washers, and special steel washer nut. This assembly can be used to mount the lower glass sash channel to your actual door glass. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! Learn More

Was: $13.99 ea.

Now: $11.99 ea.

Add to Wishlist

Camaro Vent Window Handle Kit, 1967 Part # WR-24
Reproduction Of Orignal Kit Includes Two Chrome Die-Cast Vent Window Handles With Roll Pins, Two Vent Window Stud Assemblies With Polished Stainless Steel Caps, Two Fiber & Two Rubber Gaskets, Two Internal Plastic Bushing Spacers & Four Special Wave Washers (2 Extra) This Camaro reproduction vent window handle kit has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction vent window handle kit from Rick's will add authenticity and value to your Camaro. Learn More
$84.99 Kit

Add to Wishlist

Camaro Door Glass Stop Bumper Assembly, Rear, 1968-1969 Part # WR-84
Reproduction Stop Bumper Assembly Coated Bumper Stud With Nuts 1 Required Per Door Glass For Rear Door Glass Whether your door glass is cracked, stained, or smudged, you'll need to eventually replace it to stay safe in your 1968 or 1969 Camaro. When replacing your window glass, it is best to get new mounting tools to ensure you have a safe and successful assembly. Rick's Camaros offers this new rear door glass stop mount and nut for your F-Body. This reproduction stop bumper assembly has the coated bumper stud with nuts. One of these sets is required per door glass. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 or 1969 1st gen Camaro! Learn More
$11.99 ea.

Add to Wishlist

Camaro Door Glass Guide Stop Bumpers, 1970-1981 Part # 33-31000
Reproductions Of Original Comes As A Pair Of Stop Bumpers Hard Plastic Construction Replaces GM #9833748 Whether replacing your door glass or not, the door glass guide stop bumpers often become extremely brittle over time and will need to be replaced as well. Rick's Camaros offers this pair of hard plastic stop bumpers for your F-Body's window glass. These glass guide bumpers are required to ensure proper door glass alignment when you are replacing your window glass, so don't wait to be prepared! Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 2nd gen Camaro! Learn More
$9.99 pr.

Add to Wishlist

Camaro Door Access Plug, Lower, Front, 1968-1969 Part # WR-52
Plastic access hole plug. One each front door. Each Learn More
$1.99 ea.

Add to Wishlist

Camaro Front & Rear Window Crank Handles, Clear, 1969 Part # IN-249
Reproduction Of Original Correct Front & Rear Technically Correct Bends & Knob Correct Spline Depth Retaining Clip Included   Your Chevy Camaro window handle goes through a lot. This little window crank multiples the up and down forces in order to raise or lower your window. Over time, fatigue and stress slowly wear at your Camaro window handle causing it to fail. Sometimes the mounting slot becomes oblong and stripped, or your knob breaks free. Other times, your Camaro window handle simply snaps in half. Ricks Camaro knows the importance of a properly made window handle and is proud to offer the very best. Simply more them a good looking chrome plated window handle, these new reproductions are made with modern materials and manufacturing techniques to will withstand the rigors job of raising and lowering your Camaro window for years to come. Die cast like the factory units, these window cranks are then chrome plated and stylish knob is added to give that authentic look back to your interior. Ricks Camaro knows that rechroming that old originals takes away a lot of fine detail, and rechroming can’t fix hidden stress cracks. Truly a high quality Chevy Camaro window handle at an unbeatable price, Ricks Camaro will help to get your Camaros restoration done right. Learn More
$52.99 Set

Add to Wishlist

Camaro Adjusting Screw, Vent Window, Lower, 1967 Part # 33-00110
Reproduction Of Original 2 Required Per Car Replacing your vent windows, then most likely you are going to need new adjusting screws. Don't rely on those old rusty screws. Do the job once and do it right. Learn More

Was: $7.99 ea.

Now: $6.99 ea.

Add to Wishlist

Camaro Stud Assembly, Lower Glass Sash Channel Mount, 1970-1981 Part # 33-31015
Reproduction Of Original Two Required Per Glass Nylon Bushing And Backing Washers Special Steel Washer Nut Hex Head Stud The stud assembly on the glass sash channels of your 1970-1981 Camaro is important for mounting the glass sash channel to the actual door glass. Rick's Camaros offers this door glass sash mount stud assembly, with a stud bolt with hex head, nylon bushing and backing washers and special steel washer nut. This stud assembly is used to mount the lower glass sash channel to the door glass, keeping everything running smoothly while on the road. Remember that two are required per window glass. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 2nd gen Camaro!  Learn More
$9.99 ea.

Add to Wishlist

Items 1 to 28 of 42 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by
1