Product Experts Available 1-800-359-7717

CAMARO STEERING COLUMN HARDWARE FOR ALL YEARS AND MODELS

Rick's Camaros takes care of all your Camaro steering column hardware needs. We're your one-stop shop for Camaro steering column parts. That includes Camaro steering column hardware and Camaro steering column components at the lowest prices around. Rick's Camaros is the most trusted name in Camaros. Get your Camaro steering column parts today at Rick's Camaros.

Filter Your Result

CATEGORY
  1. Ignition Keys and Locks (25)
  2. Steering Column (44)
  3. Steering Column Cover (8)
BRAND
  1. (1)
  2. (1)
  3. (2)
  4. (4)
  5. (28)
  6. (2)
  7. (6)
PRICE RANGE
  1. (16)
  2. (18)
  3. (14)
  4. (29)
 
Items 1 to 24 of 77 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next Page
Grid  List 
Camaro Steering Column To Floor Boot, 1967-1969 Part # HR-28
Best Quality Reproduction Steering Column Boot Accurately Molded, High Durometer Black Rubber Spun Molded As Original Fits Around Steering Column At The Floor The steering column floor boot helps keep your Camaro firewall sealed off from the elements and noxious engine vapors. Over time, this weatherstrip can crack and allow nasty stuff to come into the passenger compartment. So, look down at your carpet firewall guard and make sure your steering column floor boot is not cracked and replace it with this high quality reproduction part from Rick's Camaros. Learn More

Was: $16.99 ea.

Now: $14.99 ea.

Camaro Steering Column Cover, Under Dash, 1969 Part # HR-13
Best Quality Reproduction Camaro Steering Column Cover Black Injection Molded ABS Plastic Correct Grain Molded Into Cover  Fits Under The Steering Column To Finish Dash Carrier Assembly If you need a new dash carrier in your Camaro, do not forget the under dash steering column cover. This accurate reproduction finishes this installation off in your Camaro after the steering column is put in. Injection molded with correct grain, this under dash column cover also uses new 2012 tooling and has correct percentage gloss and color as OE. Ricks Camaros has simply the best parts for your Camaro at the best possible price. So, if you have a 1969 standard Camaro, Super Sport (SS), Rally Sport (RS), Pace Car or Z28, Rick's Camaros has everything you need for your Camaro restoration. Learn More
$29.99 ea.
Camaro Steering Column Ignition Lock Sector Gear, For Cars Without Tilt Steering Wheel, 1969-1989 Part # HR-61
Stock Replacement   Commonly stripped gear that actuates the column ignition switch rod when the key is turned. For without tilt steering columns only. Learn More
$17.99 ea.
Camaro Ignition Lock, With Original Style Keys, 1969 Part # ID-8
69 ignition lock cylinder assembly with original 69 GM head keys. All locks and parts are OEM. Compare for quality and price! Learn More

Was: $18.99 ea.

Now: $11.99 ea.

Camaro Steering Column To Dash Covers, Left & Right, 1967-1968 Part # HR-26
Very nice accurate reproduction of often broken or missing originals. Trim pieces finish out steering column to dash. Black only, paint to match. Learn More

Was: $33.99 pr.

Now: $29.99 pr.

Camaro Key Blank, Ignition And Door, Square Head, 1969 Part # ID-94
Stock Replacement Original GM Uncut Key Blank Can Be Used For Door Or Ignition Easily Coded To Replace Lost Keys This stock replacement key blank is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit, finish and function meets all GM specifications. Using stock replacement parts from Rick's, such as this key blank, is a sound investment in the restoration or repair of your vehicle. Learn More
$1.99 ea.
Camaro Steering Column Cover Mounting Hardware Set, Under Dash, 1969 Part # HW-90
Hardware set, screws & J-nuts attach lower steering column cover to dash instrument cluster. Learn More
$2.99 Set
Camaro Key Blank, Glove Box & Trunk, Round Head, 1969 Part # ID-95
Stock Replacement Original GM Uncut Key Blank Can Be Used For Door Or Ignition Easily Coded To Replace Lost Keys This stock replacement key blank is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit, finish and function meets all GM specifications. Using stock replacement parts from Rick's, such as this key blank, is a sound investment in the restoration or repair of your vehicle. Learn More
$1.99 ea.
Camaro Steering Column Cover Mounting Hardware, 1967-1968 Part # HR-53
Correct mounting screw for mounting steering column cover (HR-26). Learn More
$3.99 ea.
Camaro Steering Column Clamp Plate, 1967-1968 Part # HR-78
High Quality Reproduction Steering Column To Floor Cover Two Piece Design Black EPD Coated Stamped Steel    If your Camaro steering column clamp plate is in less than perfect shape, or is missing altogether, replace it with this great reproduction form Rick’s Camaros. This heavy stamped steel steering column to floor cover provides sturdy support for your steering column install. The two piece design give you ease of installation while the heavy gauge EPD coated steel assures you of years of worry free use. Rick’s Camaros offers all the restoration and performance parts you need for your 1968 Camaro. Learn More
$43.99 ea.
Camaro Key Blank, Ignition And Door, Octagon Head, 1967 Part # ID-90
Stock Replacement Original GM Uncut Key Blank Can Be Used For Door Or Ignition Easily Coded To Replace Lost Keys This stock replacement key blank is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit, finish and function meets all GM specifications. Using stock replacement parts from Rick's, such as this key blank, is a sound investment in the restoration or repair of your vehicle. Learn More
$5.99 ea.
Camaro Steering Column, Tilt, Floor Shift, 1969 Part # HR-69
Restored Original Tilt Column Bolt-In Installation For Floor Shift Manual Or Automatic Transmissions  Only Lifetime Warranty For 1969 Camaro Models  The original steering column on your 1969 first generation Camaro can become worn down over time from excessive force, possibly even becoming wobbly. If this were to happen, the steering column can possibly negatively affect your steering by losing its connection or shifting while driving on the road. Don't wait to keep your steering secure in your F-Body. Rick's Camaros is happy to offer this nice remanufactured original til steering column to replace your worn original. This adjustable column means that the steering column is locked by a rachet lock just below the column not far from the driver. This means that while traveling, the driver can change the steering height on the move without losing control of the car. The tilt column is rebuilt from the ground up with quality parts, and will fit your Camaro with floor shift manual or automatic transmission. With a bolt-in installation, you can be sure that replacing your original steering column will be easier. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro! NOTE: Ignition switch, Turn signal lever, tilt lever and hazard switch knob available separately.  Learn More
$519.99 ea.
Camaro Tilt Steering Wheel Release Lever, With Knob, 1968-1970 Part # HR-38
Quality Replacement Part Black Knob Has Been Pre-Installed Correct Factory Texture Knob Chrome Plated Lever Shaft   This tilt steering wheel release lever is the replacement part you want for your 1968-1969 Camaro. Ricks Camaros offers this qualtiy replacement lever for your project or part replacement needs. A driver never wants his steering wheel release lever to break because it can cause the steering wheel to not able to be adjusted, causing discomfort with driving style and problems with handling on the 1968, 1969  Camaro. That is why this part is proudly made to be superior in quality at the same price as other companies imported reproduction. Trust Rick's Camaro for all your Camaro restoration and replacement part needs. Learn More

Was: $24.99 ea.

Now: $17.99 ea.

Camaro Security Override System, VATS, 1986-2002 Part # 725323
Simulates Correct Key Easy Installation On occasion, your Camaro's VATS system may not recognize your key's code, leaving you stranded. The SOS is an inexpensive module that when plugged into your wiring harness simulates your correct key. Nothing shows to let thieves know your VATS have been bypassed. To order your SOS have your local GM dealer measure the resistance on your computer key (it will be a 1 thru 15 value code, See Related below). Learn More
$25.99 ea.
Camaro Steering Column To Floor Cover, 1969 Part # HR-77
Reproduction Of Orignal Includes Upper & Lower Halves With Mounting Screws This Camaro reproduction steering column to floor cover has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction steering column to floor cover from Rick's will add authenticity and value to your Camaro. Learn More
$43.99 ea.
Camaro Key Blank, Glove Box And Trunk, Pearhead Head, 1967 Part # ID-91
Stock Replacement Original GM Uncut Key Blank Can Be Used For Glove Box And Trunk Easily Coded To Replace Lost Keys This stock replacement key blank is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit, finish and function meets all GM specifications. Using stock replacement parts from Rick's, such as this key blank, is a sound investment in the restoration or repair of your vehicle. Learn More
$5.99 ea.
Camaro Ignition Lock Cylinder, 1970-1978 Part # 735012
Best Quality Reproduction Correct Cylinder Correct Style Keys Ignition Switch Sold Separately If you just bought your Camaro, it is a good idea to change the ignition lock. Rick's Camaros makes it easy with this single ignition lock cylinder set. Replace yours today with this quality replacement lock cylinder from Rick's Camaros. Learn More

Was: $18.99 ea.

Now: $11.99 ea.

Camaro Security Ignition Key, VATS, 1988-2002 Part # 735633
Specially Coded Made In The USA Because 1988 and later Camaros have specially coded ignition keys, it makes good sense to have a couple of spares. To order a key, have your local GM dealer measure the resistance on your key. Trust Rick's Camaro 1988, 1989, 1990, 1991, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Camaro. Learn More
$14.99 ea.
Camaro Lower Column Bearing, For Cars With Non-Tilt Steering Column & Floor Shift, 1967-1968 Part # HR-100
Replacement Lower Column Bearing Attaches With Stainless Fasteners Utilizes Original Holes, No Drilling Required Camaro steering column lower bearings are crucial to the peak performance of your 1967 or 1968 Camaro. The steering column is connects the steering wheel to the steering mechanism, and it also plays a role in transferring torque from the steering wheel. Within the column lies the steering shaft, which is supported, by bearings at the top and the bottom of the column. These bearings allow the steering column fluid rotation. Have you ever been driving down the road when your steering wheel became unresponsive and increasingly harder to turn? How about a loose up and down movement of the column? Well, these are telltale signs that your steering column bearings need replacing. Overtime, the bearings encounter high stress levels, resulting in wear and tear. This wear and tear can come in the form of steering box failure, rag joint and rubber coupling issues, immature steering box wear, and internal wear in the column. These hindrances will limit your ride’s function and your enjoyment. Rick's Camaros is here to help in your steering columns recovery. Visit Rick's Camaros today for all your 1967 and 1968 Camaro needs. Learn More
$87.99 ea.
Camaro Ignition Lock, With Original Style Keys, 1968 Part # ID-7
68 ignition lock cylinder with original 68 GM head keys. All locks and parts are OEM. Compare for quality and price! Learn More

Was: $21.99 ea.

Now: $17.99 ea.

Camaro Ignition Lock Cylinder, 1979-1988 Part # 735013
Reproduction Of Original Chrome Bezel This Camaro reproduction ignition lock cylinder has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction ignition lock cylinder from Eckler's will add authenticity and value to your Camaro. Learn More

Was: $18.99 ea.

Now: $14.99 ea.

Camaro Steering Coupler Flange, Tilt Steering Column, 1967-1969 Part # HR-70
New column coupler flange used only on tilt columns. (Non-tilt columns have pressed on flange). Use special bolt {HR-31} to attach. (Bolt not included with flange) Learn More
$49.99 ea.
Camaro Ignition Lock, With Original Style Keys, 1967 Part # ID-6
67 ignition lock cylinder with original 67 GM head keys. All locks and parts are OEM. Compare for quality and price! Learn More

Was: $18.99 ea.

Now: $14.99 ea.

Items 1 to 24 of 77 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next Page
Grid  List 
1