Product Experts Available 1-800-359-7717

CAMARO FRONT PERFORMANCE CONTROL ARMS FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (5)
  2. (1)
  3. (2)
  4. (4)
  5. (5)
  6. (5)
  7. (1)
PRICE RANGE
  1. (2)
  2. (2)
  3. (19)
 
23 Item(s) Grid  List 
Camaro Spring Isolators, Lower Control Arm, Speed Tech, 1967-1981 Part # SS-271
Black Urethane Material Heavy Duty, Long Lasting Needed For Speed Tech Lower Control Arms, When Using Coil Springs NOTE: Will not fit stock control arms. These Speed Tech lower control arm spring isolators are made of a tough black urethane material. Made to withstand the abuse of hard road driving and throwing your Camaro in the corners. These lower control arm spring isolators are needed when purchasing the Speed Tech tubular lower control arms (SS-269 or 721625)Depend on Rick's for your suspension handling needs. Learn More
$34.99 pr.
Camaro Tubular Upper Control Arm Kit, Detroit Speed & Engineering (DSE), 1967-1969 Part # DS-20
Greaseable Aluminum/Delrin Bushings & Ball Joints Are Installed CNC Stainless Steel Cross Shafts Use An Adjustable Caster Aluminum Bushing System Increases Camber Gain & Improves Roll Camber Tig Welded & Powder Coated Gloss Black The Detroit Speed upper control arm kit is a bolt on enhancement for 1967-1969 Camaros. Suspension geometry is improved over stock by increasing camber gain and improving roll camber. DSE's upper control arms have been computer modeled and the components have undergone finite element analysis. The control arms have CNC stainless steel cross shafts which incorporate DSE's 'Caster Tuner Bushings'. These aluminum bushings adjust caster by moving the upper control arm fore/aft for more or less caster without adding alignment shims. This unique caster adjustment design is engineered to be precise and permanent. The upper control arms also utilize DSE designed bushings. These greaseable aluminum/Delrin bushings have an increased stiffness over stock. This provides more consistent and precise handling. The bushings also have CNC machined bevel stainless washers and stainless ny-lock nuts. Learn More
$699.99 ea.
Camaro Upper Control Arms, Front, Tubular, Red, With Bushings, 1993-2002 Part # 721239
1.25" x .120" wall seamless DOM tubing Greasable polyurethane bushings CNC cut 3/16" ball joint mounting plate -3 degree improved ball joint angle for lowered cars STRONGER, yet LIGHTER than stock! Fully assembled and ready to install Durable and brilliant powder coated finish Lowering the weight of your car's moving suspension parts is a great way to a more contolled and comfortable ride. Utilizing thick DOM tubing, these arms will allow your car to react much faster to changes and make your spring & shock assembly do it's job faster. Learn More
$249.99 pr.
Camaro Tubular Lower Control Arm Kit, Coilover Spring Pocket, Detroit Speed & Engineering (DSE), 1967-1969 Part # DS-90
Complete With Lower Ball Joints, Steering Stops, Bumpers & Delrin Bushings Geometry Features Include Additional Positive Caster & Drop Spring Pocket With Gussets Tig Welded & Powder Coated Gloss Black For Cars With Coilover Shocks Learn More
$649.99 pr.
Camaro Tubular Lower Control Arm Kit, Detroit Speed & Engineering (DSE), 1970-1981 Part # 721543
Complete With Lower Ball Joints, Steering Stops, Bumpers & Delrin Bushings Geometry Features Include Additional Positive Caster & Drop Spring Pocket With Gussets Tig Welded & Powder Coated Gloss Black For Cars With Coil Springs Learn More
$679.99 pr.
Camaro Tubular Lower Control Arm Kit, Coil Spring Pocket, Detroit Speed & Engineering (DSE), 1967-1969 Part # DS-33
Complete With Lower Ball Joints, Steering Stops, Bumpers & Delrin Bushings Geometry Features Include Additional Positive Caster & Drop Spring Pocket With Gussets Tig Welded & Powder Coated Gloss Black For Cars With Coil Springs Learn More
$649.99 pr.
Camaro Tubular Upper Control Arm Kit, Hotchkis, 1967-1969 Part # SS-534
100% TIG Welded 1.25" Tubular Steel Construction Silver Zinc Plated, 4130 Chromoly Offset Billet Cross-shaft Upper Ball Joints & Polyurethane Droop Stops Installed Gloss Black Powder Coat Finish Billet Aluminum Offset & Stock Dimension Caster Inserts Install the Hotchkis Tubular Upper A-Arms on your 67-69 Camaro or Firebird and gain vastly increased handling and control. These TIG welded; bolt-on arms offer increased camber and caster adjustment over stock, for ultimate performance. Smooth operating Delrin bushings allow the Arms to move through their travel easily. Finished in gloss black powder coat, the Arms are ready to install and are complete with ball joints, offset cross-shafts, offset caster inserts, Delrin bushings and droop stops.Exceptional handling performance when combined with the Hotchkis Performance Tubular Camaro Upper A-Arms from Rick's. Learn More

Was: $712.99 pr.

Now: $669.99 pr.

Camaro Lower Tubular Control Arms, With Bushings, 1982-1992 Part # 721755
Stronger & Lighter Than Stock Control Arms Equipped With Spring Box For More Strength & Rigidity Equipped With Moog Greasable Ball Joints Brilliant Red Powder Coated Finish Fully Assembled & Ready To Install Greasable Polyurethane Bushings Included Spohn Performance's front control arms set a new, higher standard of performance and quality. When we designed our a-arms, we had two goals in mind. One was to provide the performance capabilities needed for the toughest race tracks, the second was to provide the strength and durability required for the demands of a daily driven vehicle. We're proud to say that we have accomplished both. If you are looking for the "cheapest" a-arms, we don't have them. If you are looking for the best front suspension components for the third generation F-Body, you just found them. Spohn front control arms are a true "A" arm rather than a "V" arm. This provides maximum rigidity and equalizes forces delivered in to the k-member. Spohn control arms are gusseted in critical areas to ensure that a weld never breaks. They decrease overall weight, and more importantly - "unsprung" weight. These a-arms are equipped with a spring "box", not a "perch". This provides for maximum strength and rigidity. Our spring box has a stepped spring seat that provides for proper seating of the spring around it's circumference. This allows the spring to spread it's load across the entire spring seat, not at one small area as other designs on the market do. Learn More
$499.99 pr.
Camaro Tubular Upper Control Arm Kit, Detroit Speed & Engineering (DSE), 1970-1981 Part # 721542
Greaseable Aluminum/Delrin Bushings & Ball Joints Are Installed CNC Stainless Steel Cross Shafts Use An Adjustable Caster Aluminum Bushing System Increases Camber Gain & Improves Roll Camber Tig Welded & Powder Coated Gloss Black The Detroit Speed upper control arm kit is a bolt on enhancement for 1970-1981 Camaros. Suspension geometry is improved over stock by increasing camber gain and improving roll camber. DSE's upper control arms have been computer modeled and the components have undergone finite element analysis. The control arms have CNC stainless steel cross shafts which incorporate DSE's 'Caster Tuner Bushings'. These aluminum bushings adjust caster by moving the upper control arm fore/aft for more or less caster without adding alignment shims. This unique caster adjustment design is engineered to be precise and permanent. The upper control arms also utilize DSE designed bushings. These greaseable aluminum/Delrin bushings have an increased stiffness over stock. This provides more consistent and precise handling. The bushings also have CNC machined bevel stainless washers and stainless ny-lock nuts. Learn More
$699.99 pr.
Camaro Lower Control Arms, Tubular, Speed Tech, 1967-1969 Part # SS-269
Stronger Than The Factory Control Arm Black Acetron GP® (Delrin) Bushings That Have 0 Deflection Ability To Either Use Standard Coil Shock Combination Or Coil Over Shock Setup. Arms Come With Adjustable Steering Stop Using A 3/8" Hex Bolt To Prevent Tire Scrub Complete Factory Replacement With No Modifications Required To Install Control Arms Bushings Made Of Black Acetron GP® That Have 0 Deflection Control Arms Come Powder Coated Low Drag & Self Lubricating Properties For A Bind Free Operation Instructions On How To Install The Arms The Tubular Lower Control Arms are CAD designed Mandrel Bent and all components are either laser cut or CNC machined for exact tolerances. They are made from 1.5" Seemless tubing with a wall thickness of .155. The control arms come complete powder coated with Acetron GP® type bushings and Energy Suspension™ Urethane Bump Stops. Also included is an adjustable steering stop. Learn More
$644.99 pr.
Camaro Upper Control Arms, Tubular, Speed Tech, 1970-1981 Part # 721624
Stronger Than The Factory Control Arm Improved Suspension Geometry Provides Additional Built In Positive Caster Which Improves Your Handling Ability Urethane Bump Stops Provide Ball Joint Protection At Full Drop Complete Factory Replacement With No Modifications Required To Install Control Arms Bushings Made Of Black Acetron GP® That Have 0 Deflection Control Arms Come Standard With Stainless Steel Cross Shafts Control Arms Come Powder Coated With New Hardware Low Drag & Self Lubricating Properties For A Bind Free Operation Instructions On How To Install The Arms Along With Recommended Allignment Specs The Tubular Upper Control Arms are CAD designed Mandrel bent and all components are either laser cut or CNC machined for exact tolerances. They are made from 1.25" seamless tubing with a wall thickness of .125. The control arms come complete powder coated with stainless steel cross shafts, Acetron GP® type bushings and Urethane Bump Stops. Learn More

Was: $679.99 pr.

Now: $644.99 pr.

Camaro Lower Control Arms, Tubular, Speed Tech, 1970-1981 Part # 721625
Stronger Than The Factory Control Arm Black Acetron GP® (Delrin) Bushings That Have 0 Deflection Ability To Either Use Standard Coil Shock Combination Or Coil Over Shock Setup. Arms Come With Adjustable Steering Stop Using A 3/8" Hex Bolt To Prevent Tire Scrub Complete Factory Replacement With No Modifications Required To Install Control Arms Bushings Made Of Black Acetron GP® That Have 0 Deflection Control Arms Come Powder Coated Low Drag & Self Lubricating Properties For A Bind Free Operation Instructions On How To Install The Arms The Tubular Lower Control Arms are CAD designed Mandrel Bent and all components are either laser cut or CNC machined for exact tolerances. They are made from 1.5" Seemless tubing with a wall thickness of .155. The control arms come complete powder coated with Acetron GP® type bushings and Energy Suspension™ Urethane Bump Stops. Also included is an adjustable steering stop. Learn More
$659.99 pr.
Camaro Tubular Lower Control Arm Kit, Hotchkis, 1967-1969 Part # SS-533
100% TIG Welded 1.5" Tubular Steel Construction CNC Machined Inset Spring Cup Aluminum Shims Allow For ¼" To ½ Ride Height Adjustment Polyurethane Coil Spring Isolators High Quality Lower Ball Joints Installed Install the Hotchkis Tubular Lower A-Arms on your 67-69 Camaro or Firebird and gain vastly increased handling and control. These TIG welded, bolt-on arms offer ride height adjustment for ultimate performance and a great look, regardless of engine and transmission combinations. Smooth operating Delrin bushings allow the arms to move through their travel easily. Finished in gloss black powder coat, the arms are ready to install and are complete with ball joints, bump stops, ride height shims, polyurethane coil spring locators and Delrin bushings. Exceptional handling performance when combined with the Hotchkis Performance Tubular Camaro/Firebird Upper A-Arms. Learn More
$729.99 pr.
Camaro Lower Control Arms, With Rod End Bushings, Front, Tubular, 1993-2002 Part # 721240
1.25" x .120" wall seamless DOM tubing Ball joint cups are CNC machined from 2.75" o.d. x .375" wall seamless mechanical tubing Greasable ball joints (installed) TIG welded 4130 chrome moly threaded tube adapters CNC machined through sleeve and zinc coated steel spacers keep rod ends perfectly centered inside of the k-member mounting bracket CNC cut and formed 3/16" shock mount Formed .125" sway bar end link mounts Durable and brilliant powder coated finis Grade 8 shock mounting hardware included Fully assembled and ready to install STRONGER, yet LIGHTER than stock Weight is the name of the game when it comes to suspension parts. These arms are stronger and much ligter than stock ones. They feature new greasable ball joints, and spherical rod ends. Your car will be much easier to service and align. Learn More
$499.99 pr.
Camaro Front Upper Control Arms, Tubular, Red, With Rod Ends, 1993-2002 Part # 721488
1.25" x .120" Wall Seamless DOM Tubing 3/4" Chrome Moly Spherical Rod Ends With Teflon® Self Lubricating Race CNC Machined Sleeves & Zinc Coated Steel Spacers Keep Rod Ends Perfectly Centered Inside Of Their Brackets Rod Ends Allow Additional Alignment Adjustability CNC Cut 3/16" Ball Joint Mounting Plate -3 Degrees Of Caster For Better Steering Response  Durable & Brilliant Powder Coated Finish Fully Assembled & Ready To Install Much STRONGER & Lighter Than Stock Powder Coated Red Lowering the weight of your car's moving suspension parts is a great way to a more contolled and comfortable ride. Utilizing thick DOM tubing, these arms will allow your car to react much faster to changes and make your spring & shock assembly do it's job faster. Learn More
$389.99 pr.
Camaro Tubular Lower Control Arms, Heidt's, 1970-1981 Part # 721728
Stronger & Lighter Than Originals Original Suspension Geometry Includes New Spring Cushions, Urethane Bushings & Ball Joints Powder Coated Black New control arms from Heidt’s will really wakeup your suspension. These tubular arms have the same geometry as original, but are stronger and lighter. They feature new ball joints, urethane bushings and are powdercoated black. Learn More
$699.99 pr.
Camaro Lower Tubular Control Arms, With Rod End Bushings, Spohn, Steel, 1993-2002 Part # 721744
Ball Joint Cups Are CNC Machined From 2.75" o.d. x .375" Wall Seamless Mechanical Tubing 3/4" Chrome Moly Spherical Rod Ends With Teflon® Self-Lubricating Race Rod Ends Allow Additional Alignment Adjustability TIG Welded 4130 Chrome Moly Threaded Tube Adapters CNC Machined Through Sleeve & Zinc Coated Steel Spacers Keep Rod Ends Perfectly Centered Inside Of The K-Member Mounting Brackets Spohn Performance's front lower a-arms set a new, higher standard of performance and quality. When we designed our a-arms, we had two goals in mind. One was to provide the performance capabilities needed for the toughest race tracks, the second was to provide the strength and durability required for the demands of a daily driven vehicle. We're proud to say that we have accomplished both. Spohn's front lower a-arms are a true "A" arm rather than a "V" arm. This provides maximum rigidity and equalizes forces delivered in to the k-member. Spohn control arms are gusseted in critical areas to ensure that a weld never breaks. The Spohn front control arms can be installed on a stock k-member, or on aftermarket k-members. They decrease overall weight, and more importantly - "unsprung" weight. If you are looking for the highest quality front suspension components for the fourth generation F-Body, you just found them! Learn More
$474.99 pr.
Camaro Tubular Upper Control Arms, Heidt's, 1970-1981 Part # 721758
Stronger & Lighter Than Originals Original Suspension Geometry Includes New Cross Shafts, Urethane Bushings & Ball Joints Powder Coated Black New control arms from Heidt’s will really wakeup your suspension. These tubular arms have the same geometry as original, but are stronger and lighter. They feature new ball joints, urethane bushings and are powdercoated black. Learn More
$477.99 pr.
Camaro Tubular Upper Control Arm Kit, Hotchkis, 1970-1981 Part # 721907
100% TIG Welded 1.25" Tubular Steel Construction Silver Zinc Plated, 4130 Chromoly Offset Billet Cross-shaft Upper Ball Joints & Polyurethane Droop Stops Installed Gloss Black Powder Coat Finish Billet Aluminum Offset & Stock Dimension Caster Inserts Install the Hotchkis Tubular Upper A-Arms on your 70-81 Camaro or Firebird and gain vastly increased handling and control. These TIG welded; bolt-on arms offer increased camber and caster adjustment over stock, for ultimate performance. Smooth operating Delrin bushings allow the Arms to move through their travel easily. Finished in gloss black powder coat, the Arms are ready to install and are complete with ball joints, offset cross-shafts, offset caster inserts, Delrin bushings and droop stops.Exceptional handling performance when combined with the Hotchkis Performance Tubular Camaro Upper A-Arms from Eckler's. NOTE: Alternate Image Shows A-body Control Arms Learn More
$729.99 pr.
Camaro Upper Control Arms, Tubular, Speed Tech, 1967-1969 Part # SS-268
Stronger Than The Factory Control Arm Improved Suspension Geometry Provides Additional Built In Positive Caster Which Improves Your Handling Ability Urethane Bump Stops Provide Ball Joint Protection At Full Drop Complete Factory Replacement With No Modifications Required To Install Control Arms Bushings Made Of Black Acetron GP® That Have 0 Deflection Control Arms Come Standard With Stainless Steel Cross Shafts Control Arms Come Powder Coated With New Hardware Low Drag & Self Lubricating Properties For A Bind Free Operation Instructions On How To Install The Arms Along With Recommended Allignment Specs The Tubular Upper Control Arms are CAD designed Mandrel bent and all components are either laser cut or CNC machined for exact tolerances. They are made from 1.25" seamless tubing with a wall thickness of .125. The control arms come complete powder coated with stainless steel cross shafts, Acetron GP® type bushings and Urethane Bump Stops. Learn More
$579.99 pr.
Camaro Black A-Arms, IFS Upgrade, 1967-1969 Part # 33-10547
Black Upgrade From Raw Steel Installed On Kit Ordered Made In The U.S.A. This is the black A-Arms upgrade from the raw steel normally included in the independent front suspension package. The 35-10537 or 35-10538 front end assembly must be purchased first to upgrade the A-Arms to black. NOTE: Part #35-10537 Or #35-10538 Must Be Purchased First To Get This Black A-Arms Upgrade Learn More
$139.99 Kit
Camaro Tubular Lower Control Arm Kit, Hotchkis, 1970-1981 Part # 721908
100% TIG Welded 1.5" Tubular Steel Construction CNC Machined Inset Spring Cup Aluminum Shims Allow For ¼" To ½ Ride Height Adjustment Polyurethane Coil Spring Isolators High Quality Lower Ball Joints Installed Install the Hotchkis Tubular Lower A-Arms on your 70-81 Camaro or Firebird and gain vastly increased handling and control. These TIG welded, bolt-on arms offer ride height adjustment for ultimate performance and a great look, regardless of engine and transmission combinations. Smooth operating Delrin bushings allow the arms to move through their travel easily. Finished in gloss black powder coat, the arms are ready to install and are complete with ball joints, bump stops, ride height shims, polyurethane coil spring locators and Delrin bushings. Exceptional handling performance when combined with the Hotchkis Performance Tubular Camaro/Firebird Upper A-Arms. Learn More
$849.99 pr.
Camaro Control Arm Relocation Brackets, Rear, 1982-2002 Part # 721228
Maintains Proper Suspension Geometry On Lowered Cars Weld-In Installation Required These brackets reposition your instant center by altering your control arm angle for increased traction. They are made from laser cut 3/16" cold rolled steel. Learn More

Was: $127.99 Set

Now: $96.99 Set

23 Item(s) Grid  List 
4