Product Experts Available 1-800-359-7717


Filter Your Result

  1. (1)
  2. (1)
  3. (2)
  1. (2)
  2. (4)
  3. (5)
  4. (1)
12 Item(s) Show per page Grid  List 
Camaro Flywheel Or Flexplate Cover Plate Bolt Set, 1/4" SEMS, Manual Or Automatic Transmission, 1967-1981 Part # HW-80
Correct Sems Style Bolts With Captured Star Washer Set Of 4 Correct set of bolts to bolt the flywheel or flexplate cover to the transmission bell housing. Also correct for attaching spark plug wire shields to engine block. NOTE: Please check the bolt size on your car before ordering as later model transmissions were tapped for Metric bolts. Learn More
$3.99 Set
Camaro Flywheel Dust Cover, TH350 or TH400, 1967-1981 Part # 33-10354
Reproduction Flywheel Dust Cover Plate Black Painted Steel Fits TH-350 & TH-400 Automatic  Transmissions Fits 1967-1981 Camaro Models Whether you are hearing unwanted rattling vibrations from your transmission, or you're starting to experience clutch failure, chances are that you are in great need of a new flywheel bellhousing dust cover plate for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro with TH350 or TH400 Automatic Transmission. Without a dust cover inspection plate or with one that is very worn down, your ring gear is exposed to constant dirt and road debris. Over time, debris and other objects can clog up your flywheel and clutch area, causing premature clutch failure. Clutch failure in your automatic F-Body can be reported from a feeling of your engine racing without your vehicle moving faster, most commonly during gear shifting. This can be confirmed through dark transmission fluid that appears burned. Further strain against your flywheel can lead to accelerated failure, putting you in a dangerous situation. Rick's Camaros offers this flywheel bellhousing dust inspection cover plate, made from stamped steel with a black glossy finish. This reproduction metal plate attaches to the bellhousing and promises to protect the flywheel and clutch from any future road debris. This dust shield will also keep outside debris away from your ring gear and flexplate. You will not have to remove your transmission to apply a new dust cover inspection plate, so installation should be simple and effective. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Chevrolet Camaro! Learn More
$19.99 ea.
Camaro Flexplate To Torque Converter Mounting Bolt & Nut Set, 1967-1969 Part # CL-50
Replacement Torque Converter Bolts Attaches Flexplate To Torque Converter   This Camaro replacement torque convertor bolts set has been manufactured to meet or exceed factory specifications and performance. You will find the fit; finish and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this torque convertor bolts set among other possible parts as the best choice for your repair or restoration project. Learn More
$11.99 Set
Camaro Flexplate Cover Plate, Automatic Transmission, Powerglide Or Torque Drive, 1967-1973 Part # CL-44
Reproduction Black Plastic As Original Fits 67-72 Small Block 283, 307, 327 or 350 With Powerglide Fits 67-73 6-Cylinder With Powerglide or Torque-Drive Nice reproduction of the torque converter cover for Powerglide and Torque-Drive transmissions. Driving your car without this cover is not a good idea. Dirt can get into the transmission, torque converter and starter causing major problems in the long run. Learn More

Was: $52.99 ea.

Now: $49.99 ea.

Camaro Automatic Transmission Flexplate Dust Cover, Powerglide, Chrome, 1967-1969 Part # C-9417
Good Quality Replacement Stamped Steel Highly Polished Chrome For Powerglide Transmissions Only Quality replacement automatic flywheel cover for your Camaro with the PowerGlide transmission. Rick's Camaros offers the best parts at the best price! Learn More
$53.99 ea.
$14.99 ea.
Camaro TH350 Stall Converter, 2000-2200 Stall, JW Performance, 1967-1981 Part # 33-10461
Performance At A Lower Cost Provides 2,000-2200 RPM Of Stall Speed Made In USA This torque converter is built in house by J.W. Performance Transmission to assure the highest possible quality and attention to detail. The unit is completely assembled, welded, balanced, pressure tested and balance all with J.W. Performance Transmission manufacturing facility. This beauty stalls at 2,000 to 2,200 and is perfect for cams within the range from 2.20 to 2.30 duration at .050? and horsepower ratings up to 450HP. Learn More
$249.99 ea.
Camaro Powerglide Billet Servo Piston, JW Performance, 1967-1981 Part # 33-10462
Nice Upgrade! Billet Aluminum W/ Dual Orings Made In USA J.W. Performance Transmission billet aluminum dual ring o-ring servo is produced in house with American made products. The dual o-ring provides positive low band apply. The features include dual o-ring seals, and increased volume. Learn More
$39.99 ea.
Camaro Powerglide Billet Servo Cover, JW Performance, 1967-1981 Part # 33-10463
Nice Upgrade! Made In USA J.W. Performance Transmission billet aluminum servo cover provides increased rigidity to minimize leaks at the servo cover. This unit includes: O-ring, seal, gasket, hardware and 1/8? NPT pressure port. As always J.W. Performance products are manufactured in house with American made material. Learn More
$39.99 ea.
12 Item(s) Show per page Grid  List