Product Experts Available 1-800-359-7717

CAMARO CLUTCH HARDWARE FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (2)
  2. (20)
  3. (3)
  4. (1)
  5. (1)
  6. (1)
  7. (3)
PRICE RANGE
  1. (17)
  2. (15)
  3. (6)
  4. (3)
  5. (2)
 
Items 1 to 24 of 44 total Page:
  1. 1
  2. 2
  3. Next Page
Grid  List 
Camaro Clutch Fork Boot, Bellhousing, 1967-1983 Part # CL-11
Good Quality Reproduction Clutch Fork Boot Black Molded Rubber One Required per Car Fits Big Block or Small Block Cars Rick's brings you this reproduction clutch fork boot to replace a commonly worn Camaro part. The bellhousing to clutch fork rubber boot seals out water and dust by sealing around the clutch fork and the rectangular fork hole in the Camaro clutch bellhousing. Every time you push the clutch pedal in your manual transmission Camaro, the clutch fork boot gets a work out and will eventually tear. Check your Camaro's bellhousing today and order your replacement from Rick's First Generation.   NOTE: Camaros with hydraulic throw out bearings may use this boot for the hydraulic lines to pass through as some measure of protection. However, the clutch fork boot will not provide an air tight seal. Learn More

Was: $9.99 ea.

Now: $8.99 ea.

Camaro Clutch Bellcrank Push Rod Retaining Clip, 1967-1969 Part # CL-18
Technically Correct Reproduction Retaining Clip Set Hurst Style Correct Diameter & Tensile Strength Retains Various Clutch Linkage Components   The bellcrank assembly in your 1967-1969 Camaro has several components to keep it together, including the push rod retaining clips. Over time, these clips can become brittle and break off, leaving your bellcrank assembly prone to misalignment. Replace your clutch bellcrank push rod mounting clips today. Rick's Camaros offers this set of bellcrank push rod retaining clips, used to hold various clutch linkage components in the bellcrank assembly of your F-Body. This technically correct reproduction set includes three Hurst style retainer clips, with correct diameter and tensile strength. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969 Camaro! Learn More
$2.99 ea.
Camaro Clutch Bellcrank Upper Push Rod Boot, 1967-1969 Part # CL-46
Best Quality Reproduction Upper Pushrod Boot Molded Rubber Boot With Encased Steel Mounting Flange Seals Firewall Where Clutch Upper Pushrod Passes Through Rubber parts on the firewall like this clutch upper pushrod boot take a severe beating from the elements and heat cycles of your Camaros engine. Rick's offers only the best Camaro parts for your restoration and this clutch upper push rod boot is no exception. Buy the best Camaro parts at the best possible pricing from Rick's today. Learn More
$9.99 ea.
Camaro Clutch Bellcrank Felt Seals, 1967-1981 Part # CL-17
Best Quality Reproduction Bellcrank Seals Heavy, Die Cut Felt Fiber As Original Keeps Grease In The Clutch Bellcrank Where It Belongs 9/16" ID & 1½" OD This little Camaro part does a big job and will wear out easily from years of use and abuse.  These clutch bellcrank felt seals are used on each side of the Camaro clutch bellcrank to prevent leakage of grease. Rick's offers this replacement pair to replace the original felt seals exactly. Trust Rick's Camaros to bring you only the best Camaro parts at the best possible pricing. Learn More
$4.99 pr.
Camaro Clutch Return Spring, Small Block, 1967-1969 Part # CL-6
Best Quality Camaro Clutch Return Spring Correct Length And Tension Unlike Others Plated As Original For Use On Small Blocks With Clutch Spring Extension Wire Our Part # CL-7 The Camaro coupe or convertible clutch spring is very important. If this return spring breaks, you and your 1967, 1968 or 1969 Camaro will be stuck on the side of the road. Trust Rick's Camaros to bring you the best parts for your standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 always at the best possible pricing. Learn More
$6.99 ea.
Camaro Clutch Return Spring Extension Wire, Small Block, 1967-1975 Part # CL-7
Best Quality Camaro Clutch Extension Wire Correct Length Plated As Original For Use On Small Blocks With Clutch Return Spring Our Part # CL-6 Fits 1967-1975 Small Block Fits 1967-1972 Big Block The Camaro coupe or convertible clutch spring extension wire is very important. If this clutch return spring wire breaks, you and your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974 or 1975 Camaro will be stuck on the side of the road. Trust Rick's Camaros to bring you the best parts for your standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 always at the best possible pricing. Learn More
$9.99 ea.
Camaro Clutch Bellcrank Lower Push Rod Set, Small Block, 1967-1981 Part # CL-10
Reproduction Of Original 3 Piece Set   This Camaro reproduction clutch bellcrank lower push rod has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction clutch bellcrank lower push rod from Rick’s will add authenticity and value to your Camaro.   Learn More
$23.99 ea.
Camaro Bellhousing Mounting Bolt Set, 1969 Part # BH-38
Correct flanged head bolts mounts Bellhousing to block. Learn More
$10.99 Set
Camaro Manual Transmission To Bellhousing Mounting Hardware Set, 1967-1969 Part # CL-32
Correct TR head marks. Set mounts transmission to bellhousing. Four bolts and lockwashers. Learn More
$12.99 Set
Camaro Flywheel Crankshaft Mounting Bolt & Washer Set, Manual Transmission, 1967-1981 Part # CL-47
Set Of 6 Correct High Grade Bolts Heat Treated To Grade 8 Includes Matching Washers Black Plated Finish 7/16-20" Thread Size For Manual Transmissions Bolts Correct Through 1992, Will Need Different Washers It is time that you got a complete flywheel crankshaft mounting bolt and washer set for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro. Over time, your original bolts can get worn down, cracked, or broken off, leaving your flywheel crankshaft susceptible to movement and potential damage. Rick's Camaros offers this new set of six correct mounting bolts and washers for your F-Body with manual transmission. Engineered and manufactured for continued reliability, these alloy steel drive train fasteners have been heat trated to Grade 8 specifications to promise extra strength against your crankshaft. This set includes lock washers to help attach the manual flywheel to the crankshaft, and is all black plated to resist future rust. Don't wait to get new, great looking mounting hardware for your drive train components. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971 ,1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 1st or 2nd gen Chevy Camaro! Learn More
$11.99 ea.
Camaro Clutch Bellcrank Pivot Kit, 1967-1981 Part # CL-21
Reproduction Of Original Works With All GM & Reproduction Bellcranks   This Camaro reproduction clutch bellcrank pivot kit has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction clutch bellcrank pivot kit from Rick's will add authenticity and value to your Camaro.     Kit Includes: 3 Nylon Seats 1 Retaining Clip       Learn More
$9.99 ea.
Camaro Clutch Pressure Plate Bolt & Washer Set, 1967-1981 Part # CL-48
  Set Of 6 Correct High Grade Bolts Attaches Pressure Plate To Flywheel Heat Treated To Grade 8 Includes Matching Washers Fasteners Yield 120,000 Psi Black Plated Finish 3/8-16" Thread Size Bolts Correct Through 1987, Will Need Different Washers It is time that you got a complete clutch pressure plate mounting bolt and washer set for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro. Over time, your original bolts can get worn down, cracked, or broken off, leaving your pressure plate susceptible to movement and potential damage. Rick's Camaros offers this new set of six correct mounting bolts and washers for your F-Body. Engineered and manufactured for continued reliability, these alloy steel drive train fasteners have been heat trated to Grade 8 specifications to promise extra strength against your t. This set includes lock washers to help attach the pressure plate to the flywheel, and is all black plated to resist future rust. Don't wait to get new, great looking mounting hardware for your drive train components. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971 ,1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 1st or 2nd gen Chevy Camaro! Learn More
$8.99 ea.
Camaro Clutch Fork Ball Stud, 1967-1981 Part # CL-20
Reproduction Of Original Screws Into Bellhousing   Your clutch fork ball stud is what is used to screw into your 1967, 1968, or 1969 Camaro’s bellhousing to mount the clutch fork. The clutch fork is used to push the throwout bearing in when you depress the clutch pedal. While these things may not seem like much, the function of the clutch system is to transfer the rotational movement of the engine to the transmission, while at the same time offering a way to disconnect this force at the driver’s command every time the clutch is depressed. Having a faulty clutch fork on your Camaro because of broken or missing clutch fork ball studs can be extremely detrimental to your Camaro while in motion and using the clutch. Replace your fork call studs today, with Rick’s Camaros! Made from steel with a natural finish, these fork ball studs match original factory specifications and will replace your previous ball studs perfectly. Trust Rick’s Camaros for all of your restoration and replacement needs on your 1967, 1968, or 1969 Camaro. Learn More

Was: $13.99 ea.

Now: $10.00 ea.

Camaro Clutch Rod Firewall Cover Screws, 1967-1969 Part # CL-86
Pair of correct size and style screws used to mount upper push rod boot or the clutch hole cover & seal. Incorrect cadmium plating instead of phosphate and oil. Learn More
$1.99 pr.
Camaro Clutch Bellcrank Pivot Stud, Engine Block Side, 1967-1983 Part # CL-4
Best Quality Reproduction Camaro Bellcrank Stud Not A Generic Knockoff Part Heat Treated & Black Oil Finish As Original For Long Service Life Includes Integral Rubber Seal The Camaro bellcrank stud can make or break a cruise night and Rick's Camaros has only the best available. Other block side bellcrank studs for the end of the Z bar are not heat treated and will break easily under stress from a hard launch. Ricks offers only the best reproduction bell crank pivot stud you can get for your Camaro. So if you need to replace yours in your Standard Camaro, Super Sport (SS), Rally Sport (RS), Z28, Type LT or Berlinetta, Ricks Camaros has only the best clutch pivot you can buy for your Camaro. Learn More

Was: $13.99 ea.

Now: $11.99 ea.

Camaro Clutch Master Cylinder Firewall Bracket, 1967-1969 Part # DS-74
Bracket Can Be Welded To The Firewall To Make Water Proof Seal Works With 98-02 Camaro Clutch Master Cylinder This DSE bracket mounts the GM hydraulic clutch master cylinder to the firewall of the 1967-1969 Camaro. The bracket correctly positions itself by mounting between the firewall and brake master cylinder or brake booster on power brake cars. The firewall will require a clearance hole for the clutch master cylinder to pass through once the bracket has been positioned. Learn More
$29.99 ea.
Camaro Clutch Return Spring, Big Block, 1967-1969 Part # CL-35
Accurate reproduction for use with Big Block engines only. Learn More
$8.99 ea.
Camaro Clutch Bellcrank Assembly, Big Block, 1967-1969 Part # CL-36
For all 67-69 big blocks, quality heat treated reproducion of the Z-bar, or cross shaft, includes the grease zerk fitting and installed frame side pivot ball and seat assembly. Learn More

Was: $44.99 ea.

Now: $37.99 ea.

Camaro Clutch Return Spring Extension Bracket, Big Block, 1967-1969 Part # CL-13
Bracket used on big block applications only. Mounts to exhaust manifold stud. Learn More
$8.99 ea.
Camaro Clutch Rod Firewall Cover & Seal Set, 1967-1981 Part # CL-85
Reproduction Of Original This Camaro reproduction clutch rod firewall cover and seal set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction clutch rod firewall cover and seal set from Rick's will add authenticity and value to your Camaro. Learn More
$19.99 Set
$19.99 ea.
Camaro Clutch Bellcrank Pivot Ball & Stud, Frame Side, 1967-1969 Part # CL-5
Accurately machined reproduction fits all original and reproduction big and small block bell-cranks. Learn More
$14.99 ea.
Items 1 to 24 of 44 total Page:
  1. 1
  2. 2
  3. Next Page
Grid  List 
1