Eckler’s is open, shipping and ready to meet all of your automotive needs. Learn More

Rick's Camaro is open, shipping and ready to meet all of your automotive needs. Learn More

Product Experts Available 1-800-359-7717

Filter Your Result

  1. Remove This Item Category: Brakes
  2. Remove This Item Category: Brake Valves and Filters
BRAND
  1. (1)
  2. (1)
  3. (3)
PRICE RANGE
  1. (8)
  2. (5)
  3. (8)
 

2010 CHEVY CAMARO BRAKE VALVES AND FILTERS

Search Term: 'All Parts'
Category: 'Brake Valves and Filters'
Vehicle: '2010 CHEVY CAMARO'
21 Item(s) Show per page Grid  List 
Camaro Proportioning Valve & Bracket Set, 1967-1969 Part # 33-185791-1
Accurate Reproduction  Designed According To OE Standards Includes Bracket Made In USA This is the hold off valve that mounts on the stud of the master cylinder on all factory disc brake cars. It is used in conjunction with the distribution block mounted on the frame, which is the same on the disc and drum cars. This valve holds off the front brakes to give time for the rears to activate. At a calibrated pressure, the valve allows fluid to pass and engages the front brakes. This all happens in a matter of seconds. Make sure you have the best valve available. This hold off valve from the Rick's Camaros is an accurate reproduction of the original and comes with mounting bracket.  Fits 1967, 1968, 1969 Learn More

Was: $109.99 ea.

Now: $89.99 ea.

Camaro Proportioning Valve & Bracket Set, Disc Brake Conversion, 1967-1969 Part # 33-185060-1
Excellent for use when originality is not required. Use with line sets FKT-8 and FIN-8 for a complete nice looking setup. Includes valve and valve mounting bracket. Learn More

Was: $99.99 Set

Now: $43.99 Set

Camaro Disc Brake Conversion Proportioning Valve, 1967-1981 Part # 33-184910-1
Replacement Valve Beautifully Machined Out Of Brass  Required On All Dual Master Cylinder Installations Provides Even Braking For All Four Wheels Use With 4-Wheel Drums, Front Disc/Rear Drums Or 4-Wheel Disc Brakes Absolutely nothing is more important to the operational safety of an automobile than the braking system. Essential to the braking system of your 1967-1981 Chevrolet Camaro, Rick's Camaro brings you the Camaro Disc Brake Conversion Proportioning Valve to help provide even and proportional braking on all wheels of the car, ensuring maximum safety. No matter what year your Camaro was made, whether it be 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or even 1981, you cannot place too much emphasis on safety. And remember to always trust Rick's Camaro with all your restoration needs. Learn More

Was: $79.99 ea.

Now: $29.99 ea.

Camaro Rear Brake Hose To Steel Line Junction Block, 1967-1968 Part # 33-184620-1
Joins Rear End Brake To Rubber Brake Hose High-Quality Reproduction Of Original Piece Will Replace Original Piece Perfectly Keeps The Hose In Line Absolutely nothing is more important to the operational safety of an automobile than the braking system. Essential to the braking system of your 1967-1967 Chevrolet Camaro, Rick's Camaro brings you the Rear Brake Hose To Steel Line Junction Block. In layman's terms, this junction block connects the brake hose of your 1967 or 1968 Chevrolet Camaro to the steel line. Made with high-quality steel, this junction block will prevent potentially hazardous occurrences like brake failure. And remember to always trust Rick's Camaro with all your restoration needs. Learn More
$1.99 ea.
1967-1969 Camaro Disc Brake Hold-Off Valve Part # 33-187140-1
Reproduction Disc Brake Hold Off Valve   Mounts To Driver&rsquo s Side Frame Rail For Cars With 2 Piece Front To Rear Brake Lines This item is an exact reproduction 1967, 1968 and 1969 Camaro disc brake hold off valve. This valve was used to hold off pressure to the rear brakes so the front brakes would go on a split second before the rears. This was also considered a correction valve. During extreme braking conditions, this valve prevented the car from getting sideways and evened out braking loads. Rick's Camaros offers this valve for every application. This hold off valve  is an exact reproduction featuring a brass body, the correct bracket, phosphate plating and functioning internals. The reproduction has no tool stamping marks and the edges of the part are much cleaner than the original. Don't take chances with your 1967, 1968 or 1969 Camaro's brake system. Replace your malfunctioning hold off valve with a reproduction from Rick's Camaros. Learn More

Was: $67.99 ea.

Now: $49.99 ea.

Camaro Power Brake Booster Vacuum Check Valve, 1967-79 Part # 33-182477-1
Quality replacement Black molded plastic No longer available with grommet Always choose quality, choose Eckler's for superior restoration, and performance products! Learn More
$3.99 ea.
$7.99 ea.
Camaro Bracket, Disc Brake Conversion Proportioning Valve, 1967-69 Part # 33-184911-1
Good quality reproduction Works with our DBC-42 conversion proportioning valve Puts valve under master cylinder Learn More
$9.99 ea.
Camaro Power Brake Splitter Block, With Low Pressure Switch, 1967-69 Part # 33-187361-1
New reproduction brake distribution block with correct rear line opening. Always choose quality, choose Rick's Camaro for superior restoration, and performance products! Learn More
$79.99 ea.
Camaro Brake Hose Block Mounting Bracket, Rear Axle, 1967-1968 Part # 33-182470-1
Bracket mounts the rear brake hose block. Attaches to rear end cover bolt. US Made. Learn More
$11.99 ea.
Camaro Brake Hose Block Mounting Bracket, Rear Axle, 1969 Part # 33-182471-1
Bracket mounts the rear brake hose block. Attaches to rear end cover bolt. US Made. Learn More
$14.99 ea.
Camaro Power Brake Splitter Block Mounting Bracket, 1967-69 Part # 33-182984-1
Fits all drum and disc brake Camaros New reproductin in 2003 Mounts beneath master cylinder   Always choose quality, choose Rick's Camaro for superior restoration, and performance products!     Learn More
$9.99 ea.
Camaro Proportioning Valve, Chrome, 1970-1981 Part # 33-159974-1
Replacement Valve Triple Chrome Plated Provides Even Braking On All 4 Wheels Learn More
$53.99 ea.
Camaro Proportioning Valve Rear Cover Boot, 1967-69 Part # 33-184330-1
Small rubber dust cap on back of pro valve. Reproduction in neoprene functions well but is not technically correct. Always choose quality, choose Rick's Camaro for superior restoration, and performance products! Learn More
$3.99 ea.
Camaro Brake Proportioning Valve, Chrome, 1967-1969 Part # 33-188257-1
Triple Chrome Plated Replaces Original Brake Proportioning Valve Learn More
$54.99 ea.
1967-1969 CamaroAdjustable, Brake Proportioning Valve,Black, Part # 33-182544-1
Excellent for use when originality is not required. Adjustable valve (no line sets) in billet aluminum for racing/handling applications.  Always choose quality, choose Rick's Camaro for superior restoration, and performance products! Learn More

Was: $61.99 ea.

Now: $44.99 ea.

Camaro Brake Proportioning Valve Cover, Chrome, 1967-1969 Part # 33-279666-1
Excellent compliment for vehicles with chrome booster assemblies Fits original style round valves only Always choose quality, choose Rick's Camaro for superior restoration, and performance products!  Learn More
$4.99 ea.
Camaro - Brake Booster Check Valve, Show Quality, 1967-1981 Part # 33-373815-1
Show Quality Reproduction Correct Dirty White Plastic As Original Includes 2 Correct Black Pinch Clamps & Booster Grommet Made In USA Show Quality Reproduction Correct Dirty White Plastic As Original Includes 2 Correct Black Pinch Clamps & Booster Grommet Made In USA Exact reproduction of the original brake booster check valve. Correct color plastic unlike the available replacements. Correct grommet to fit original and reproduction AC Delco Moraine brake boosters. Clamps included. Learn More
$18.99 Set
1967-1968 Camaro Brake Proportioning Valve, OE Style Part # 33-457378-1
  Licensed GM Restoration Part Replaces Original Brake Proportioning Valve This brake proportioning valve is made just like the factory made it. Correct in every way. Learn More
$59.99 ea.
Camaro Rear Brake Hose Mounting Bracket, 1967-1968 Part # 33-187047-1
Correct rear brake hose bracket mounts to under side of car. Made in the USA Learn More
     
Camaro Proportioning Valve Bracket, 1967-1969 Part # 33-181603-1
For all disc brake Camaros. US made cad plated reproduction of original. Learn More
     
21 Item(s) Show per page Grid  List