Product Experts Available 1-800-359-7717

CAMARO AIR INTAKE DUCTS AND RELATED FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (1)
  2. (4)
  3. (1)
PRICE RANGE
  1. (4)
  2. (1)
  3. (9)
  4. (2)
 
16 Item(s) Show per page Grid  List 
Camaro Valve Cover Grommet, Breather Hose, All Small Block,1967-1969, Finned Aluminum, 1969-74 Part # 33-180246-1
Reproduction Of Original All Small Block 1967-1969 Finned Aluminium 1969-74   Your valve cover grommet is designed to control oil leakage into your Camaro’s PCV valve. They also keep oil from getting all over your valve cover. Although a small piece of an otherwise very large puzzle, valve cover grommets are important in keeping the look of your Camaro clean and reputable. Rick’s Camaros is happy to offer valve cover grommets for your breather hose, all small block, matching original factory specifications and replacing your original grommet. Keep your Camaro looking clean and stylish and make sure that it is never tarnished with stains and spills. Get a new valve cover grommet today, from Rick’s Camaros! Learn More
$5.99 ea.
Camaro Valve Cover Grommet, Breather Hose, All Big Block, 1967-1969 Part # 33-180247-1
Replacement Grommet   This Camaro replacement valve cover grommet has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this valve cover grommet among other possible parts as the best choice for your repair or restoration project. Learn More
$4.99 ea.
Camaro Breather Hose Fitting, Cross Ram Intake, 1968-1969 Part # 33-180988-1
Accurate US made reproduction of curved breather hose fitting assembly. Includes seal and retaining nut. Use with Crossram set-ups only. Learn More
$199.99 ea.
Edelbrock 3815 Efi Intake Elbow Universal 100 Deg 120Mm T.B. To 4500 Dominator Flange Part # 33-398861-1
Efi Intake Elbow Universal 100 Deg 120Mm T.B. To 4500 Dominator Flange 4.1" Bore; 0.041" Compressed; 9.2cc Volume Learn More
$171.99 ea.
Edelbrock 3814 Efi Intake Elbow Universal 100 Deg 95Mm T.B. To 4500 Dominator Flange Tall Profi Part # 33-398864-1
Efi Intake Elbow Universal 100 Deg 95Mm T.B. To 4500 Dominator Flange Tall Profile 4.23" Bore; 0.038" Compressed; 8.75cc Volume Learn More
$157.99 ea.
Edelbrock 3849 High Flow Intake Elbow; 95Mm Throttle Body To Square-Bore Flange; As-Cast Finish Part # 33-454598-1
These elbows are designed for use in high hp race applications. An internal divider optimizes flow distribution to all ports of the manifold by reducing turbulence. High Flow Elbow #3849 is an ultra high flow version which measures 4.50" from flange to throttle body centerline (7.75" overall height). During flow testing this elbow provided up to 1,050 cfm with a 90mm throttle body and 1,150 cfm with a 95mm throttle body. Does not accept LS1 throttle bodies. Intake Elbow #3814 has a universal bolt pattern and is the best way to adapt a single throttle body to a Dominator® 4500 style flange EFI manifold without sacrificing air flow. The throttle body flange accepts 90-95mm LS1, LS2 and Ford 5.0L based throttle bodies. Intake Elbow #3815 is also engineered for use on a Dominator 4500 style flange manifold. It has a 120mm opening for maximum flow and is capable of over 1,400 naturally aspirated hp. The throttle body flange uses a 4.250" square bolt pattern. This elbow flows 1,800 cfm @ 20.5 in H2O. Includes a universal throttle bracket. Learn More
$141.99 ea.
Edelbrock 38493 High Flow Intake Elbow; 95Mm Throttle Body To Square-Bore Flange; Black Finish Part # 33-454599-1
These elbows are designed for use in high hp race applications. An internal divider optimizes flow distribution to all ports of the manifold by reducing turbulence. High Flow Elbow #3849 is an ultra high flow version which measures 4.50" from flange to throttle body centerline (7.75" overall height). During flow testing this elbow provided up to 1,050 cfm with a 90mm throttle body and 1,150 cfm with a 95mm throttle body. Does not accept LS1 throttle bodies. Intake Elbow #3814 has a universal bolt pattern and is the best way to adapt a single throttle body to a Dominator® 4500 style flange EFI manifold without sacrificing air flow. The throttle body flange accepts 90-95mm LS1, LS2 and Ford 5.0L based throttle bodies. Intake Elbow #3815 is also engineered for use on a Dominator 4500 style flange manifold. It has a 120mm opening for maximum flow and is capable of over 1,400 naturally aspirated hp. The throttle body flange uses a 4.250" square bolt pattern. This elbow flows 1,800 cfm @ 20.5 in H2O. Includes a universal throttle bracket. Learn More
$160.99 ea.
Camaro Breather Hose Elbow Fitting, Small Block, Valve Cover, 1967-1973 Part # 33-180248-1
Reproduction Of Original   This Camaro reproduction breather hose elbow fitting has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction breather hose elbow fitting from Rick's will add authenticity and value to your Camaro. Learn More
$8.99 ea.
Camaro Breather Hose Elbow Fitting, Big Block, Valve Cover,1967-1972 Part # 33-180249-1
  Reproduction Of Original   This Camaro reproduction breather hose elbow fitting has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction breather hose elbow fitting from Rick's will add authenticity and value to your Camaro. Learn More
$8.99 ea.
Camaro Vararam Ram Air Intake System, V8, 2010-2013 Part # 33-314485-1
Great Performance Upgrade! 20-32 HP Gain! Recommended For Cars Up to 430 HP Easy Bolt On Installation No Tune Required Vararam HAS GIVEN CAMARO OWNERS WHAT THEY HAVE BEEN asking for! The new 2010-2011 Camaro system from VR represents a major leap forward in terms of real world performance delivered with the quality that Camaro owners and tuners alike have come to expect. ?Quite simply, this is the Most Powerful ram air system we have ever produced for a Road Car.? This is the most powerful induction system of any kind for the new 2010-2011 Camaro. Our competition will talk, but they will not outflow it or outrun it. They will never outperform it! Every aspect of induction technology has been used in this system. You can even take the filter out of the latest VR system and drive the car around without issue ....it will be baby smooth, try that with any other air box on the planet! This enables tuners to maximize the HP in there combinations without compromising drivability at any point. From mild to wild the VR-SS will stay smooth while delivering tire smoking airflow that no other company can match! Learn More
$499.99 ea.
Camaro Vararam Ram Air Intake System, V6, 2010-2011 Part # 33-314556-1
25-30 HP Gain! Fits V6 Easy Bolt On Installation No Tune Required The V-6 Camaro unit is unique in that it is designed around the V-6 engines cross ram intake manifold flow architecture and its need for maximum plenum volume. Features: Reverse venturi 85MM MAF Integrated rear air-horn to boost flow through the throttle body Sound frequency cancelation, to remove that whomp, whomp sound from your intake. Engineered / built in tune. (mild) Quick and easy installation (we did it in under 9 min!) Guaranteed gains of 3 tenths or 3 mph through the 1/4 mile. 1/2 second gains on 0-60mph times. Learn More
$371.99 ea.
Vararam Power Wedge, For LS Conversion Part # 33-368939-1
For LS Conversions Using 2005-2007 Corvette Engine 8-12 HP Gain Increases Air Flow Up To 10% Easy Bolt On Installation The Power wedge was born from the VRX Intake manifold program. Our research showed that most of the OEM manifolds had the intake manifold neck pointed upward at about 8 degrees. This is done in order to clear the water pumps and to soften throttle tip in response. In this position , at wide open throttle the blade extends into the manifold neck and plenum up to 1 full inch downward angle position. This blocks a portion of the lower section of the flow path. In short This means that when you are at WIDE open throttle you are only getting about 88-92% of the flow that is possible from whatever throttle body you are running. The Power wedge can be used on a stock car or a car making insane HP numbers, stroker motors and supercharged applications. They all work with the "VR Power Wedge!" The Torque Curve will amaze you! It will be from 2,000 RPM all the way to red line! Learn More
$125.99 ea.
Vararam Power Wedge, For LS Conversion Part # 33-368940-1
For LS Conversions Using 2008-2013 Corvette Engine 8-12 HP Gain Increases Air Flow Up To 10% Easy Bolt On Installation The Power wedge was born from the VRX Intake manifold program. Our research showed that most of the OEM manifolds had the intake manifold neck pointed upward at about 8 degrees. This is done in order to clear the water pumps and to soften throttle tip in response. In this position , at wide open throttle the blade extends into the manifold neck and plenum up to 1 full inch downward angle position. This blocks a portion of the lower section of the flow path. In short This means that when you are at WIDE open throttle you are only getting about 88-92% of the flow that is possible from whatever throttle body you are running. The Power wedge can be used on a stock car or a car making insane HP numbers, stroker motors and supercharged applications. They all work with the "VR Power Wedge!" The Torque Curve will amaze you! It will be from 2,000 RPM all the way to red line! Learn More
$119.99 ea.
Camaro Vararam Power Wedge, LS3, 2010-2013 Part # 33-314486-1
8-12 HP Gain! Increases Air Flow Up To 10% Easy Bolt On Installation The Power wedge was born from the VRX Intake manifold program. Our research showed that most of the OEM manifolds had the intake manifold neck pointed upward at about 8 degrees. This is done in order to clear the water pumps and to soften throttle tip in response. In this position , at wide open throttle the blade extends into the manifold neck and plenum up to 1 full inch downward angle position. This blocks a portion of the lower section of the flow path. In short This means that when you are at WIDE open throttle you are only getting about 88-92% of the flow that is possible from whatever throttle body you are running. The Power wedge can be used on a stock car or a car making insane HP numbers, stroker motors and supercharged applications. They all work with the "VR Power Wedge!" The Torque Curve will amaze you! It will be from 2,000RPM all the way to red line! Learn More
$79.99 ea.
Camaro Airaid, Modular Intake Tube, 3.6L, V6, 2010-2014 Part # 33-347024-1
Great Performance Upgrade For Your Carmaro! Cross Linked Roto-Molded Intake Tubes Silicone Connectors And Hump Hoses Stainless Steel Hose Clamps Improves Airflow To The Engine 50 State Legal! C.A.R.B.   (The California Air Resources Board)   Approved! Made In USA 2010-2014 Fifth Generation Camaros are the hottest thing on the road, at the car shows and street scene. Ricks Camaros offers this awesome Airaid Modular Intake Tube, 3.6L, V6, for replacement on your Camaro. AIRAID Modular Intake Tubes (MIT) optimize airflow to the engine by replacing the factory intake tube. Factory tubes often have the accordion shaped walls, sound-canceling baffles, and undersized tube diameters, all which hurt airflow. AIRAID MIT kits help straighten and improve airflow to the engine while optimizing the location of the mass air sensor. The design provides better throttle response and additional horsepower along with better fuel economy. Modular Intake Tubes are constructed of cross-linked high-density polyethylene for strength and resistance to heat transfer. MIT tubes are direct replacements for factory intake tubes and accommodate all the factory sensors and fittings that attach to the factory tube. MIT tubes work with the factory throttle body and intake box. All necessary couplers and clamps are included, and installation takes only a few minutes. The new Camaro MIT kits have obtained CARB certification and are legal for sale and use in California as well as all other states. Get the most out of your 2010, 2011, 2012, 2013, 2014 Camaro. Trust Ricks Camaros for all your part needs. Learn More

Was: $184.99 ea.

Now: $148.99 ea.

Camaro Airaid, Modular Intake Tube, 6.2L, V8, 2010-2014 Part # 33-347025-1
Great Performance Upgrade For Your Carmaro! Cross Linked Roto-Molded Intake Tubes Silicone Connectors And Hump Hoses Stainless Steel Hose Clamps Improves Airflow To The Engine 50 State Legal! C.A.R.B.  (The California Air Resources Board)   Approved! Made In USA 2010-2014 Fifth Generation Camaros are the hottest thing on the road, at the car shows and street scene. Ricks Camaros offers this awesome Airaid Modular Intake Tube, 3.6L, V6, for replacement on your Camaro. AIRAID Modular Intake Tubes (MIT) optimize airflow to the engine by replacing the factory intake tube. Factory tubes often have the accordion shaped walls, sound-canceling baffles, and undersized tube diameters, all which hurt airflow. AIRAID MIT kits help straighten and improve airflow to the engine while optimizing the location of the mass air sensor. The design provides better throttle response and additional horsepower along with better fuel economy. Modular Intake Tubes are constructed of cross-linked high-density polyethylene for strength and resistance to heat transfer. MIT tubes are direct replacements for factory intake tubes and accommodate all the factory sensors and fittings that attach to the factory tube. MIT tubes work with the factory throttle body and intake box. All necessary couplers and clamps are included, and installation takes only a few minutes. The new Camaro MIT kits have obtained CARB certification and are legal for sale and use in California as well as all other states. Get the most out of your 2010, 2011, 2012, 2013, 2014 Camaro. Trust Ricks Camaros for all your part needs. Learn More

Was: $184.99 ea.

Now: $151.99 ea.

16 Item(s) Show per page Grid  List