1970-1981 Camaro Torque Arm Rear Suspension
Fitment
Product Details
- 1¼” High Performance Link Bars
- 1¾” Torque arm with slider & reinforcing flanges
- 1½” Coil-over crossmember with channel brackets
- 1” Adjustable Panhard bar with LH & RH rod ends
- Axle housing brackets with torque arm tabs and install tool
- Adjustable pinion support tubes with rod ends with tabs and install tool
- 1¾” Crossmember with drive shaft loop
- Bolt-on trailing arm channel brackets
- Floor reinforcing plates and hardware
- Greasable urethane bushing
- All American coil-over shocks
- Detailed installation manual
- Features & Benefits
- Dramatically improves handling
- Eliminates bind during articulation
- Strengthens the chassis
- Driveshaft loop provides added safety
- Lowered stance and center of gravity
- True bolt-in with no cutting into the floor required
- All heli-arc welded for the highest quality & strength
TCI Engineering’s 1970-1981 Camaro Torque Arm assembly is engineered for Street, Autocross and Road Course Applications. The Torque Arm rear suspension was designed to eliminate the suspension bind that occurs when cornering using the stock conventional leaf spring suspension. The Torque Arm features a telescoping slider at the front of the arm that rotates as the car goes through suspension travel and articulation. This allows the cars handling to be controlled by the coil-over shocks and the rear sway bar with no suspension binding variables. The kit allows for a lowered stance, greater rear axle control and dramatically improved handling.
There are 3 height adjustments on the axle brackets in one inch increments. You also have the ability to fine tune the ride height further with the adjustable coilovers.
The installation mostly requires drilling and bolting in components. The 1970-1981 Camaro Torque Arm kit is a bolt on application except for welding the axle brackets, panhard bracket, Torque Arm tabs and optional sway bar brackets onto the axle housing. We provide detailed instructions to properly attach the axle brackets. The optional anti-sway bar will require brackets to be welded onto the axle housing as well. The kit is available for any housing utilizing 3″ axle tubes. Complete 9” axle housings are available fully welded and ready to be bolted in.
1970-1981 Camaro Torque Arm Rear Suspension
WARNING This product can expose you to chemicals including Cadmium which is known to the State of California to cause cancer on birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov
| Base Part Number | 859536 |
|---|---|
| Brand | N/A |
| Make / Model | Series | Body | Notes | Year |
|---|---|---|---|---|
| Make / Model Chevrolet Camaro | Series | Body | Notes | Year 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 |
| Make / Model Chevrolet Camaro Base | Series | Body | Notes | Year 1970, 1971, 1972 |
| Make / Model Chevrolet Camaro RS | Series | Body | Notes | Year 1970, 1971, 1972 |
| Make / Model Chevrolet Camaro SS | Series | Body | Notes | Year 1970, 1971, 1972 |
| Make / Model Chevrolet Camaro Z28 | Series | Body | Notes | Year 1970, 1971 |