Camaro Power Window Control Switch, Single, Rear & Right Front, 1971-1972

Your Camaro's power window switch routes power directly to the respective door window motors and allows the motors physically raise and lower.  This switch consists of the operating buttons or toggles, circuit board inside the unit, and contact points for your wiring.  When you move the button or toggle, an electrical connection is made by touching contact points together and power is routed accordingly. This is one of the highest failure items on any car.

If your Camaro's power window switch starts to smoke, button develops excessive play or button breaks off of the switch completely, you will need to replace the switch.  If both windows stop working at the same time, the problem almost always lies with the driver’s side switch.  Although extremely rare for a fuse to blow or the problem to be faulty wiring or motor, you should still check these items before replacing the switch. 

Rick's Camaro is proud to offer this replacement power window switch with correct die cast, chrome plated, metal square “stepped bezel” and button.  Completely assembled with correct black spring steel mounting clips installed, installation is sure to be a snap. Nothing is like cruising with your arm perched on your door and the window down.  Now, you can do it again with high quality replacement parts from Rick's Camaro.  Always choose quality, choose Rick's Camaro for superior restoration and performance products!

1971-72 Rear & Right Front Single Power Window Control Switch