Camaro Suspension Assembly, Front End, IFS Assembly, 1967-1969
- Complete Bolt-On Front Suspension Using Factory Bolt Holes & Core Support
- This TCI Custom IFS Front End Is 120 Lbs. Lighter Than Factory Front End
- Narrowed Frame Rails Allow For Wider Tires
- Larger Brake Calipers & 11" Drilled & Slotted Rotors Dramatically Reduce Stopping Distance
- Eliminates The Factory Shock Towers For More Engine Bay & Header Clearance
- Firewall Clearance Has Been Engineered Into The Design Of The Engine Mounts
- Greater spectrum of alignment adjustments available
- Transmission crossmember is C-Notched for maximum exhaust ground clearance
- Select From Stock Or 2" Drop Spindle
- Easy Installation With Instructions & Made In The U.S.A.
Our Total Cost Involved Engineering 1st generation Camaro & Firebird front suspension clip features a no compromise design that will not break the bank. This front end will provide the ultimate in handling, weight savings and strength. The only clip on the market with dual camber curves so it performs well on the street, drag strip or autocross track. It features double rail, mandrel-bent design that provides superior strength with higher durability. Engine mounts, core support, body mounts, and suspension brackets come installed. All heli-arc welded for the highest quality strength and finish available. Significant weight savings compared to the factory clip making a more balanced front to back weight bias. The clip has been engineered to lower the center of gravity of your vehicle to decrease body roll & increase handling performance while allowing plenty of ground clearance.
This Kit Includes:
- Engine Mounts To Accept Small Block, Big Block, Or LS Motors (See Note Below)
- Bolt-In Multi Position Transmission Mount
- Billet Single Adjustable Coil-Over Shocks
- Synthetic Greasable Urethane Bushings
- Urethane Bushed Tubular A-Arms
- Black Powder Coated Springs
- 1" Performance Sway Bar
- 1 1/8" Lower Tubular A-Arms
- Power Rack & Pinion
- 2" Drop Spindles
- Aluminum Inner Fender Panels
- 11" Drilled & Slotted Zinc Plated Rotors
- Big Bore Calipers
NOTE: See Related Items Below For All Possible Upgrades & See Similar Items For The Show Option Kit. This Kit Will Work For Small Block Or Big Block Motor Applications - For LS1 Installations See Related Items For The Mounts & Oil Pan Needed.
1967-1969 Camaro Independent Front Suspension Assembly
WARNING This product can expose you to chemicals including Cadmium which is known to the State of California to cause cancer on birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov
Base Part Number | 321987 |
---|---|
Alt. # | 33-10537 |
Brand | Total Cost Involved |
Make / Model | Series | Body | Notes | Year |
---|---|---|---|---|
Make / Model Chevrolet Camaro | Series | Body | Notes | Year 1967, 1968, 1969 |
Make / Model Chevrolet Camaro Rs | Series | Body | Notes Rally Sport (RS) Convertible | Year 1967, 1968, 1969 |
Make / Model Chevrolet Camaro Rs | Series | Body | Notes Rally Sport (RS) Coupe | Year 1967, 1968, 1969 |
Make / Model Chevrolet Camaro Ss | Series | Body | Notes Super Sport (SS) Convertible | Year 1967, 1968, 1969 |
Make / Model Chevrolet Camaro Ss | Series | Body | Notes Super Sport (SS) Coupe | Year 1967, 1968, 1969 |
Make / Model Chevrolet Camaro Standard | Series | Body | Notes Convertible | Year 1967, 1968, 1969 |
Make / Model Chevrolet Camaro Standard | Series | Body | Notes Coupe | Year 1967, 1968, 1969 |
Make / Model Chevrolet Camaro Z28 | Series | Body | Notes Z28 Coupe | Year 1967, 1968, 1969 |